Your cart is empty.
Your cart is empty.Topeak Mini Pump Brackets.
Savy Shopper
Reviewed in the United States on August 25, 2024
Easily installed and effective. Easy to remove when needed.
Uncle Goose
Reviewed in the United States on December 31, 2022
I have struggled to find a good way to mount the best pump for use on the road. It had to be under the top tube as in the Texas summers one needs both bottles. I used 2 Velcro pump mounts that would allow the pump to shift around. Worse they were very inconvenient to remove the pump. This one is great, undo the Velcro safety strap and remove the pump.Topeak should bundle this mount with the pump or make it easier to find.I was a little concerned because the mount is supposed to be for the mountain Morph pump. I guess it works for both.
TJ
Reviewed in the United States on June 12, 2020
I use these mounts to secure my RoadMorph to the frames of my bikes.They're very secure and the Velcro straps are super strong. No chance they're going to come off on the road.If you're concerned about them falling off, say if you're riding off-road, as I often do, there's a slot between the frame and the center portion of the mount where a wider piece of Velcro can be passed through for added support.I don't think a second strap is really necessary, but it's good for peace of mind.As for shipping. The mount arrived a LOT sooner than it was supposed to. It said in the shipping details that it would take a week or so, but it only took two or three days to reach me.I'm very happy with my purchase and would definitely recommend this product to a friend or anyone looking for a secure way to mount a tire pump to their bike.
D Tacconelli
Reviewed in the United States on January 8, 2020
Got this to use on my 2nd bike. Screw it in, it's that easy.Comes with reusable zip ties. I did not use them to mount the unit, but I now have 2 reusable zip ties in my saddle bag for emergencies.Looks like it would also work with the road morph mini. I use the regular road morph pump, which is the larger version. It fits perfectly in the mount. This particular mount is a little smaller than the one that came with the pump, but it works fine.
Anthony
Reviewed in the United States on July 8, 2014
This mount does the job. I only gave it three stars cause the zip tie mounting system isn't all that great. It's really hard to get it super tight and so it is easy to move around after installation. Also, be careful of the little rubber pieces that come with it which touch the frame of your bike because they are super easy to lose when mounting it.
gary nichols
Reviewed in the United States on May 28, 2014
I ordered the bracket for my "Road Morph," bike pump. The label on the item I received clearly stated "Mini Morph."It looked like the wrong size, but just to be sure, I used a micrometer to measure my Road Morph Pump and the bracket. There was a .25 inch difference. I could have forced the pump into the bracket, but it would have broken. I took pictures with a ruler beside the bracket to show Amazon that it wouldn't work, and I took photos of the label as well, which said Mini Morph. Although these are obviously two different pumps, the Amazon customer service actually argued with me that they had sent the correct item. They wouldn't do a swap, so I had to return the item. I will not be ordering this bracket from Amazon. I lost money on this item because they didn't take care of shipping. If I could give negative stars I would.
the tool man
Reviewed in the United States on September 3, 2013
I purchased this to allow using my Road Morph G on my second bike. Unfortunately, it didn't fit because of the routing of the rear brake cable under the top tube, and because I use both of my water bottle cage mounts for water bottle cages. Instead, I bought a different mount that allows putting the pump beside a mounted water bottle cage. I can, however, review the performance of the mount when included with the Road Morph pump.The good:This piece is light, sturdy and functional. It holds the pump well. The Velcro strap is a nice backup retention device, though a bit awkward in use. The strap is long enough that you have to secure the end of the strap by rethreading it between the pump and mount, or finding some other place to tuck it in. Otherwise, it flaps around or rubs your leg. You could cut off the excess. But why couldn't it just be made the right length in the first place? If you don't frequently move the pump between bikes, it's no big deal.The bad:After about two months of use, I noticed a noise coming from the pump when I went over bumps. I realized one of the two plastic ties that hold the mount to the frame (under the top tube, in my case), had broken, allowing the pump to move around. The other tie had begun to fail, as well. I replaced both ties with slightly bigger ones, and haven't had the problem since. I would recommend using bigger ties and checking them often. I hate to think what might happen if this were to come off the bike while negotiating a twisty descent.So overall, I like this mount (and the pump, too!). Just keep an eye on the ties, or give up a water bottle cage.UPDATE April 3, 2014: In my review, I criticized the early breakage of the plastic ties that secure the mount. I have had no other issues since then, until today. I cleaned my bike more thoroughly than usual the other day, and used an ammonia-based cleaner. This morning, the mount broke when I attempted to snap the pump into place. I think the plastic they use is somehow made brittle by the ammonia-based cleaner I used. That may be why the original ties broke, too. So, be aware of this.
Kev
Reviewed in the United States on May 17, 2011
I gave this 5 stars even though I haven't used it. Wanted to let you know that you don't need to order this if you purchase the Morph G. I didn't pay close attention and thought I had to purchase a mount kit when I bought the pump. The pump came with a mount kit (identical to this one).My mistake, but I am ready in case the mount breaks - 5 years from now. Pump works great, by the way.
Recommended Products