Your cart is empty.
Your cart is empty.
❌ Note: The led bulb is not included!
Compatible with:
for 2003-2010 Dodge Ram 1500
for 2003-2010 Dodge Ram 2500
for 2003-2010 Dodge Ram 3500
for 2011-2016 Ram 1500
for 2011-2016 Ram 2500
for 2011-2016 Ram 3500
Package Included:
5 x Cab Marker Lights Cover
5 x Soft Pads
10 x Screws
1 X Wires
Specification:
Light Size: 5.54" x 3.27" x 1.5"
Hole Distance: 4"
Cover Color: Clear Lens
Hayden Schneider
Reviewed in Canada on February 28, 2025
Says bulbs are not included but it’s a glued in led buib you need to wire into stock. Not what I wanted at all. Since it says no bulbs. Figured it was just the housing I was ordering. Can’t change the bulbs out ever. So once they are burnt the entire thing is garbage
Linzbiatch
Reviewed in Canada on January 22, 2025
I need just the housings for my truck not led lights I just wanted new plastic housing as these state they are , but there a whole new light , I wanted to stick with replaceable lights not these ones that cannot be replaced
Steven R Steadfast Roadside & Tire Austin, Tx
Reviewed in the United States on July 26, 2024
I was in a hurry on a dually project and none of my local shops had the t10 sockets. So I thought I would order this instead, since it was prebuilt.I should have just built it myself. There was no quality control to this product, read on to know why. So after I installed this I kept popping fuses. Since I had just complete a LOT of wiring on this truck I assumed it may have been my fault and started checking wires. Could not find any problem with my own wiring.As simple as this harness was it was the last thing to be checked. And I though "how could this be messed up?" well...First, all of the wire joints looked they were hand wrapped electrical tape jobs. I kid you not.Then I decided to unwrap the tape and what do I find...every wire junction was only being held together with a brass clamp that looked like office paper staples about 3 staples wide. On top of that, and I don't think a first grader could have made this mistake...both positive and negative lines were taped together AT EVERY JOINT!!! Hence all the fuses popping. Rather than send it back since I was in a time crunch I just unwrapped every joint and put a proper T clasp.So if you are blowing fuses after installing this harness, look at the harness first. BUYER BEWARE.
Nick
Reviewed in the United States on July 16, 2024
The lens pack is fine and fit my ram 2500 but the foam pads made the leak I had 10x worse immediately! I sealed the screw holes with silicone and that didn't help. The gaskets they provide for the screw are also useless they pop over the screw head as you tighten. I'm sick of using silicone it's a pain in the butt. The wiring harness is kind of bogus too but they work fine. These are not led, you can re use the original bulbs.Consider Butyl tape to make your own gasket for the bottom so these don't leak.IMO this is a pack of lenses with a wiring harness to make it an easy swap but expect the foam pads to leak as it did for several others. We have had heavy rain to test these under.Thankfully these are cheap and so is Butyl tape
Customer
Reviewed in Canada on June 7, 2024
Description says T10 socket bulbs. But these have LEDs built in. I have a set like this in my truck now and half the LEDs are burnt out. Looks stupid. I want to be able to change bulbs. Do not get these.
Lukus bb
Reviewed in the United States on February 8, 2024
Well made,fit what I needed and it’s designed to do its job. Would buy again
Al Snow
Reviewed in the United States on February 22, 2024
Fit great looks amazing. No gaskets under screw heads so I added a dap of butyl sealant. Also has a pigtail that plugs in where the old bulbs were so I added a dab of bulb grease (dialectric grease). SUPER GREAT VALUE , Compare to $27. A piece for just the lenses from Mopar.
Dennis Scianna Jr.
Reviewed in the United States on February 20, 2024
These lights fit my 2017 Ram 2500 perfectly and look great just reuse the factory gasket.
NV
Reviewed in Canada on December 11, 2024
The joins are just wrapped with electrical tape and both positive and negative wires are touching and wrapped together. Recipe for disaster. Do not install this.
ALLEN JUNIOR
Reviewed in the United States on October 3, 2024
i’m not much of a reviewer, but this was by far one of the most efficient and effective ways to help me save time and hassle of directly having to splice and wire the connections for my cab lights. plug and play all i had to do was ground it and trace positive to my running light and done. would highly recommend especially for someone like me who isn’t a damn electrician.
Mike
Reviewed in the United States on August 21, 2023
These look great and are a significant upgrade over the clear assemblies with rubber gaskets.This kit comes with foam gaskets (not mentioned in the description) and are WAY better than the rubber ones. No leaks with firm securement to the cab of the truck!Highly recommend!
Warren Wolverton
Reviewed in Canada on January 26, 2023
Good quality marker lenses, seals that come with lights are foam and will leak so use your factory rubber seals. I used these with LED lights and they look great.
Customer
Reviewed in the United States on November 6, 2022
I love how they look and the quality of them, only reason I gave them 4 stars was because I had to use the extensions that were provided with the housings because these housings were smaller than the factory OEM connectors would fit in so when I had to use the extensions only one of my lights work after I installed all of the extensions and I believe it to be from the extra wire being installed so I am going to switch to LED bulbs to see if that is to change anything since they require less amps and bolts than their halogen counterparts. My only complaint would be that the factory connectors did not fit into these housings and I would prefer rubber seals instead of the foam Style that come with these housings
Recommended Products
