Shopping Cart

Your cart is empty.

Your cart is empty.

UHPPOTE 125KHz Wiegand 26/34 RFID EM ID Card Reader Keypad Connect for Access Control Board

Free shipping on orders over $29.99

$22.90

$ 9 .99 $9.99

In Stock

About this item

  • The RFID card reader can't work-alone and it needs to work with Wiegand protocol access controller, such as access control panel, fingerprint device or master controller.
  • Support wiegand 26bits or wiegand 34bits output format.
  • Ultra-low power consumption, the standby current is less than 50mA
  • It uses high performance MCU to ensure stable performance, and low-power circuit makes the service life longer.
  • Widely used in factories, houses, residential quarters, offices, mechanical and electrical control equipment and so on.



Product Description

HBK-D02K reader

Warm Tips

  • Confirm the voltage (12VDC) and differentiate positive anode and cathode of the power supply.
  • About the wiring between the reader and the controller, the wire should be 22 AWG at least and the length should not exceed 100 meters.
  • When external power is used, suggest to use same power GND with controller panel. It is recommended to use multi-strand twisted pair cable to connect card reader to access controller.
  • Please don't wire the LED and BEEP wires if ther is no need to prompt light and buzzer feedback.
HBK-D02K reader

Wiegand Format

  • The standard 26-bit Wiegand format is an open format; it is a widely-used industry standard. Almost all access control systems accept the standard 26-bit format which consists of 2 parity bits, 8-bit facility code, and 16-bit card number fields. The Wiegand interface is commonly used to connect a card swipe mechanism to the rest of an access control system.
1

Introduction

  • The RFID card reader can't work-alone and it needs to work with Wiegand protocol access controller, such as access control panel or master controller.
  • It uses ST MCU to ensure stable performance, and low-power circuit makes the service life longer.

Features

  • The maximum reading distance is 2-23/64" (6cm).
  • Waterproof, conforms to IP66.
  • It is useful for safety door system, easy to connect and use.
  • Ultra-low power consumption, the standby current is less than 50mA.
  • Support wiegand 26bits or wiegand 34bits output format.
  • Fast response speed, the door opening time is less than 0.3s.
  • This device uses high performance 32-bit MCU to ensure stable performance, and low-power circuit makes the service life longer.
  • Widely used in factories, houses, residential quarters, offices, mechanical and electrical control equipment and so on.

Remarks

  • This card reader will prompt sound and light indication only when the LED and BEEP cables are connected to the access controller.
  • Please connect the Black and Gray wire together for wiegand 34bit output.

Specification

Working Voltage 12VDC
Static Current ≤50mA
Card Type Standard EM-ID
Transmit Frequency 125KHz
Working Temperature -22°F to +140°F
Working Humidity 10%-90%RH
Waterproof Rating IP66
Enclosure Material ABS Plastic
Panel Material PC Plastic
Enclosure Color Black
Button Materrial Silica gel
Enclosure Size 3-25/64"x3-25/64"x45/64"
Communication Distance Max. 328ft
Lead Cable Length 9-27/32" (250mm)
Status Indication Bi-color LED + Buzzer
Product Weight 5.3oz
Certification FCC
Wiegand Output Wiegand 26 bit or Wiegand 34 bit (Selectable)
Buzzer 1 beep means successful, 3 beeps mean failed
LED Light Red means standby, Green means activated
HBK-D02K reader
Package List

  • 1 x Wiegand Reader
  • 1 x English User Manual
  • 4 x Plastic Anchors
  • 4 x #7 x 1" Self-Tapping Screw
Remarks

  • Frequency: 125Khz
  • Card Type: EM-ID Card (Can't support HID, Cobra, APCiK etc.)
  • Please notice that our wiegand reader can't be compatible with some encrypted cards, such as HID, Indala, Cobra, APCiK, Paradox, Radio, Honeywell, etc.
  • Can't work alone, and it needs to work with access control panel. (Please search ASIN B00UX02JWE to get the access control panel.)

MIKE CALDWELL
Reviewed in the United States on March 31, 2024
This new version does not seem to correctly process the BEEP or LED inputs, unless mfg is keeping secret how to control them. Simple 0V / 5V levels aren’t doing anything consistent. Beeper and LED seem to have minds of their own. Installed the old version in its place (I had one available) and it worked great. The documentation discourages you from connecting these two wires… wait, what? What’s the secret?
TS CONSTRUCTION
Reviewed in the United States on January 22, 2021
Great product
Mike B.
Reviewed in the United States on October 20, 2019
I have installed many of these without issue but the last install had 2 unit go out within 1 month.
Mr. E
Reviewed in the United States on January 18, 2019
These things work great!Wish the construction was a little more solid, but a year+ of daily use and they work.The last one I ordered didn't work though :/
Recommended Products

$120.24

$ 51 .99 $51.99

4.3
Select Option

$219.00

$ 95 .99 $95.99

4.7
Select Option