Your cart is empty.
Your cart is empty.
Kit Contains:
8 - 711 ml Bottle of Black Truck Bed Liner Base
2 - Quarts U-Pol Raptor Standard Hardener
Includes FREE Custom Coat Bedliner Spray Gun with Regulator and Gauge ($34.95 Value)
Mixing Ratio: 3:1 Truck Bed Liner Base: U-Pol Raptor Standard Hardener
U-Pol Raptor Bed Liner & Texture Coating is a 2.1 VOC 2K protective urethane coating manufactured for the application to truck beds, wood, concrete, metal, aluminum, fiberglass, and on most OE manufacturer's finishes. U-Pol Raptor is easy to use. It protects against rust and corrosion, and has excellent UV protection. U-Pol Raptor can be applied with a Bedliner gun. Simply add hardener, shake and spray. It can also be rolled or brushed on.
Tough, durable 2 part urethane coating(Also available in Tintable in a separate listing)
Benefits:
- Easy to use: Add hardener - Shake - Spray
- Enough material to re-spray the largest truck beds
- No need to wax after application Abrasion and Stain Resistant
- Protects against rust, corrosion salt, damp & extreme temperatures
- Waterproof, flexible, helps deaden sound & vibrations
- Apply with Bedliner gun, roller or brush to obtain different textures
- Provides excellent adhesion
Preparation: U-Pol Raptor Truck Bed Liner can be applied to most original manufacturers finishes. The surface should be lightly scuffed, and free from dirt and rust. For best results bare metal should be treated with a suitable etch primer e.g. U-Pol Acid#8 (UP0776/ UP0741)
C boss
Reviewed in the United States on February 20, 2025
The best easy to use and so durable
Tpman
Reviewed in the United States on March 31, 2021
So was a little skeptical but when I received my order and applied raptor to my 21 F250 I was very impressed!! Save you money and do it yourself!! Awesome product!!
james d wilson
Reviewed in the United States on March 19, 2021
I researched the hell out of this product via YouTube... watched a ton of how to videos and decided to go with it. My truck was developing a fair bit of under paint rust bubbles along the rockers. WITHOUT A DOUBT, preparation work is the key ingredient in applying this spray. I sanded out all rust, bondo'd where necessary, scuffed every square inch I wanted to spray with 80 grit sandpaper, wiped clean with denatured alcohol, taped it off with good painters tape, covered the rest of the truck and garage floor in plastic, and went to spraying.The spraying is the simplest part. I used a graduated mixing cup to add the right amount of hardener and shook it hard as I could for 2+ minutes. I ran the gun at 50 PSI with the nozzle all the way threaded in and really like the texture I ended up with. It is very similar to new factory applied bed liner. Not tacky once fully cured, more like a hard plastic.I used 3 and a half bottle to spray both sides. It may have been overkill but I cleared the gun with denatured alcohol between bottles... just wiped the stem off with a rag, ran that down in the alcohol bottle, and sprayed til it came out clear (then let the gun fully dry, which is pretty quick with the alcohol).I allowed 1 hour between coats and 30-40 minutes before pulling the tape. That produced excellent edge retention.Lastly, because of the weather when I applied it, I left the truck in the garage for 3 full days to allow the Raptor Liner to cure. Instructions said to NOT allow it to get wet before it is cured. The very last thing I want is for water to get behind the liner.I would do this again without a doubt. Plan to do the bed next.But remember; IT IS IN THE PREP WORK. Don't slack on that and all else comes much easier. Best to ya!
ECA
Reviewed in the United States on July 6, 2020
Raptor Liner is a great product, easy to use , super durable... I chose this offer because I thought it would be nice to upgrade to an adjustable gun... bad choice, what came unlike what was pictured in the ad was a piece of junk with a plastic trigger that immediately folds to the side. Becomes a two handed operation. I'm surprised that I wasted the thinner to clean it.Other than that was a nice package !
Bigbrownbear71
Reviewed in the United States on March 14, 2020
Easy to install but let cure for a week and it chipped the first time I put some wood in the bed
CVW
Reviewed in the United States on March 1, 2020
I think this is a great do-it-yourself product. However if you are going to use a color I would recommend doing your 1st coat in black and saving the color for your last topcoat. If doing a large project it should save you some money using black as a base.
James Nelson
Reviewed in the United States on November 1, 2020
Had much more than I needed. I removed the rack from my stepdaughter’s FJ Cruiser and sprayed it with this stuff Easy to use and and included sprayer made this my go-to product for any similar future projects. I highly recommend this stuff.
CNCIACO
Reviewed in the United States on December 9, 2019
The kit is very affordable with clear instructions and easy to use. The final results are good looking and last great. This is my 3rd time using it for personal use and I now have the company I work for using it as well.
Recommended Products
$121.26
$ 52 .99 $52.99