Shopping Cart

Your cart is empty.

Your cart is empty.

UTG Super Slim T1 Mount

Free shipping on orders over $29.99

$19.73

$ 9 .99 $9.99

In Stock

1.:Lower 1/3


2.Color:Black


About this item

  • Precision CNC Machined from 6061-T6 Aircraft Grade Aluminum and Finished in a Matte Black Anodize
  • 0. 96" Saddle Height Positions T1 at the Correct Height for an Absolute Co-witness in line with Standard Height AR Iron Sights
  • Utilizes a Locking Torn Screw and Square-shaped Integral Recoil Stops for a Secure Zero Hold
  • Significant Lightening Cuts Reduce Overall Weight and Bulk
  • Includes T1 Mounting Screws, Installation Tool, and is Additionally Compatible with Aim point H1, H2, T2, and CompM5
  • NOTE: We recommend to tighten the M3-0.5 pan head torx screw with torque value of about 12 inch-lb and the side plate screw with torque value of about 35 inch-lb.



James Dylan Blankenship
Reviewed in the United States on March 7, 2025
Will be ordering the lower 1/3. Overall I like the mount. For the price it looks solid. Much better than the factory Sig Romeo 5 mount.
Juan M. Garcia
Reviewed in the United States on September 23, 2024
Good fit, price and finish. The finish is matte so the screw will make noise when tightening.
tacocat08
Reviewed in the United States on August 8, 2024
I've always been the type of guy who has to run the best or most proven equipment on my platforms. I bought this because I was sent a T&E Unit of the MCK and I wanted to run an optic on it. It didn't make sense in my mind to use a Unity Riser for an $60 optic from Primary Arms on a platform that I won't use past 25yds (Not that I can't, I just primarily won't).I saw that there was a Used on for sale and snatched that one up expecting it to be...well used. It was but, that's fine because I don't need it to be shiny and new. On to the actual mount. The mount is solid with recoil lugs and decent hardware. I reused my optic screws from the red dot and it fit just fine. The mount is secure and I have no doubt that as I continue to abuse the MCK that the MCK will give up before the mount.If you're on a budget and need functionality over anything. This fits the bill without breaking the bank.
Tustin
Reviewed in the United States on October 14, 2024
Works great for my red dot on my airsoft rifle.
Lumpy Rambo
Reviewed in the United States on August 12, 2023
Awesome mount, solid and holds zero, finish is good and matches closely with my holosun hs403r, it looks nice, has integral recoil lugs, fit tightly together with my hs403r and also fit very well on my picatinny rail. Not much else to say, great mount regardless of the price but the low price makes it an awesome value. Best mount you're gonna find without spending an arm and a leg, so unless you have an actual aimpoint or want QD, this here is the ticket.
Russell A
Reviewed in the United States on December 15, 2023
I like the build quality and recoil lug design. For the price it is amazing.As expected on a holosun 403R the absolute co-witness is between true absolute co-witness and lower 1/3. I was happy with it until I got a holosun hm3x magnifier. With the spacer installed the optic is about .10 inch low. My holosun HS515GM with the stock lower 1/3 QD mount is dead on with the hm3x. So I took some measurements.The UTG Leaper Absolute co-witness has a saddle height of .775 , in line with the value .78 stated on the leaper site , but way off from the .96 listed on the Amazon listingThe stock lower 1/3 403R mount saddle height was .875The stock lower 1/3 HS515GM was at about .90The OTG Leaper site lists the saddle height for the lower 1/3 UTG mount to be 1.04 . If accurate that puts it at .26 higher than the absolute, a bit more than the normal .22 diff.No doubt another .14 or more height over a lower 1/3 holosun mount would make the dot not visible thru the optic or at the very bottom.So my real complaint is that distance to optic centers differ from optic to optic, yet mounts always list the height of the optic center, not the saddle height.
th30ne
Reviewed in the United States on February 16, 2021
. Do your own measurements of your optic from base to center of optic to find out how it will sit. Remember that absolute irons are 1.41 ish.Very quality item. The lugs are exactly what's needed. Better than stock sig romeo 5 mount. Also, can confirm, depending on what optic the absolute may or may not be absolute and the 1/3 may or may not be unusable. The only thing all these "t1 and t2" optics share is footprint. NOT height to center from the base of optic. Sig 5 plus absolute equals lower 1/3. Exactly what I wanted. Great stuff. Light weight. Lugs are a huge deal. Leapers makes excellent products that are not junk. And for a working mans price.
CARLOS ABRAHAM ZAVALA MANRÍQUEZ
Reviewed in Mexico on July 7, 2020
Excelente, me parece que está hecha de un buen material y se ve que es de buena calidad, el envío internacional super rápido llegó más rapido que un envío nacional, la usaré en mi romeo5
Ilya
Reviewed in Canada on February 10, 2020
Except it is NOT absolute co-witness. It is lower 1/3. See picture for comparison with default Holosun mount.
Customer
Reviewed in Canada on November 26, 2020
Works perfectly with Vortex Crossfire Red Dot. Co-witnesses with my UTG flip ups. Mount is solid ans finish is top notch!
Ray
Reviewed in the United States on December 11, 2019
Keep in mind this was specifically designed for the Aimpint T-1 system. I'm using this with a Sig Sauer Romeo 5, which has an increased distance from the center of the objective lens to the base of the optic body compared to the Aimpoint and therefore pushing the 'red dot' higher. This results in a lower 1/3 co-witness with A2-height irons, which is exactly what I wanted. Can't speak for certain about the other T1 style red dots out there, but i'm guessing that is what's also the case with these negative reviews.The mount itself is extremely well machined and has a solid lock up. The finish is a clean matte black that matches my Romeo 5 perfectly. It also comes with 4 torx head mounting screws and 2 different sized torx wrenches.I am very impressed with this product! For it's price, this has to be the best value for a T1 style non-qd micro red dot mount out on the market. No complaints.
Recommended Products

$17.95

$ 8 .99 $8.99

4.8
Select Option

$35.95

$ 18 .99 $18.99

4.6
Select Option

$34.99

$ 16 .99 $16.99

4.4
Select Option

$95.00

$ 46 .99 $46.99

4.7
Select Option

$12.99

$ 6 .99 $6.99

5.0
Select Option