Shopping Cart

Your cart is empty.

Your cart is empty.

uxcell Metric Thread Tap M14 x 1.5 H2 Left Hand 130mm Extra Long Straight Flute Screw Thread Milling Machine Taps Threading Tapping Repair Tool

4.5 (1) Write Review
Free shipping on orders over $29.99

$16.99

$ 8 .99 $8.99

In Stock

1.Size:M12 X 1.75 X 130mm


  • Metric Thread Tap: Thread size: M14 x 1.5 (left hand); accuracy: H2; total length: 130mm / 5" (extra long); square shank width: 9mm / 0.35"; thread length: 32mm / 1.26"; number of chip flutes: 4 flutes
  • Straight Flute Tap: Straight flute design, clear threads without burrs, left hand tapping direction. Provides rapid downward chip removal to achieve efficient thread cutting, suitable for processing through holes or shallow holes.
  • Wide Applications: Thread taps create new threads or re-thread damaged or jammed threads. Widely used for most metals, iron plate, copper, zinc, alloy steel, abrasive steel, A3 steel, stainless steel. Add proper tapping oil for higher quality threads and more durable taps.
  • 6542 High Speed Steel Tap: Offer high hardness, good toughness, wear resistance, and excellent cutting performance. Uncoated taps feature just the base substrate without any additional coatings, great for a wide range of applications.
  • Tips: Machine taps are used with tapping, drilling, automatic or milling machines. Drill the holes with a twist drill bit first, then tap with a thread tap. The tapping angle should be 90 degrees vertical and stable. NOT recommended for hand and electric drill tapping.


Product Description

tap die

Information

Taps can be divided into straight flute thread taps, spiral flute thread taps, spiral point thread taps and thread forming taps. They are also divided into hand taps and machine taps according to the usage.

Hand taps are operated by tap wrenches. Machine taps are suggested to be used with tap collets with overload protection. Recommended feed rate: General steel: 6-15m/min; harder steel: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min.

tap

Extra Long Thread Taps

Straight Flute Tap

Provides rapid downward chip removal to achieve efficient thread cutting, suitable for processing through holes or shallow holes.

6542 (M2) High Speed Steel

6542 high-speed steel taps offer high hardness, good toughness, wear resistance, and excellent cutting performance.

Uncoated Taps

Feature just the base substrate without any additional coatings, great for a wide range of applications.

Machine Taps

  • Clear threads without burrs
  • Used with tapping machines, drilling machines, milling machines, CNC.
  • Drill the holes with a twist drill bit first, then tap with a thread tap.
  • The tapping angle should be 90 degrees vertical and stable.
tap

Wide Applications

Thread taps create new threads or re-thread damaged or jammed threads. Widely used for most metals, iron plate, copper, zinc, alloy steel, abrasive steel, A3 steel, stainless steel, etc..

Add proper tapping oil for higher quality internal threads and more durable taps. The tapping depth should not exceed 1.5 times the diameter of the tap (for example, the diameter M5x0.8 is about 5mm, and the depth should not exceed 7.5mm.)

tap

Tips

Hand use or electric drill use is easy to cause breakage to the tap, so it is not recommended. Cutting oil is lubrication, cooling and anti-sticking. Be sure to select the appropriate cutting oil for complex tapping process and apply anti-rust oil for maintenance after use.

Control speed according to material hardness. The higher the hardness, the slower the speed. Fast speed with small torque; slow speed with high torque. The force must be uniform in tapping operations.


Frank Morley
Reviewed in the United States on September 4, 2024
Worked great to clear out broken threads.