Your cart is empty.
Your cart is empty.Product Description
Top Automotive Creeper--Your reliable auto repair partner
Upgrade your repair experience with the Top Automotive Creeper, designed to combine convenience, comfort, and safety in a single tool. Say goodbye to unnecessary strain and fatigue and say hello to a more efficient and enjoyable maintenance routine.
The 8-hole and 3-angle adjustments cater to various vehicles like jeeps, trucks, and pickups, minimizing body strain and fatigue during maintenance ensuring a comfortable and ergonomic experience.
Crafted from heavy-duty steel, the creeper ensures superior load-bearing capacity and longevity. The I-shaped stable base allows for deeper anchoring into the car's bottom. Never worry about bending or wobbling during elevated tasks.
The automotive creeper has four swivel casters, including two with brakes, allowing effortless positioning and preventing unexpected shifts or tilts while working, ensuring safety and convenience.
Ideal for extended repair time, the automotive creeper provides a comfortable and fatigue-reducing solution. Stay productive and focused on tasks without experiencing discomfort, even during prolonged use.
Rebekah Shilka
Reviewed in Canada on March 26, 2025
The lower support with wheels attached is not strong enough. It's bending and the wheels are now jammed crooked. I'd like to get a new support but the only option is to package the whole thing back up and send it in complete. No real options to contact the supplier or Amazon about it. A real hassle.
jesand11
Reviewed in the United States on March 16, 2025
Top pad covering a bit cheap, but otherwise works great, makes it so much easier to work on truck engine.
Joshua S.
Reviewed in the United States on March 16, 2025
This thing is a life saver when it comes to working in my 2017 f250. It’s pretty sturdy but I have it 4 stars due to the only not rock solid part, the wheels. They seem a bit wonky.
JCSailor
Reviewed in the United States on February 6, 2025
Simple to assemble, directions were intuitive...would be good to list fastener length on instructions (i.e. Part V is 3" X 5/16"), but if you're working on cars chances are you'll be just fine. Took about 30 minutes to assemble. Have used it probably 20 times in the last three days working on an 88 Grand Wagoneer, so the firewall is WAAAAYYY back from the grill. Relatively lightweight but sturdy. Ladder rung spacing is fine. Given this is one of the lowest cost topside creepers on Amazon, there's really no reason not to buy this one.
shannon smith
Reviewed in the United States on February 1, 2025
This was a huge pain to assemble, nothing was labeled we had to put it together by looking at pictures onlineThe wheels do not move smoothly and seem to be for looks more than functionalityThe metal that the wheels go into broke after a couple of uses, welds are poorly done and the metal around the welds snappedWould not purchase this again as it is too much of a safety hazard
Ashley Michael
Reviewed in the United States on January 16, 2025
I bought this for my significant other as a gift. It is heavy and durable. Works great and we have used it for multiple car projects. Significantly helps when working on a taller vehicle, locks on the wheels are a nice touch to know you won’t slide back and smash your face on the front of the truck! Easy to assemble and did the job!
Mr T
Reviewed in Canada on June 5, 2024
instructions are not to good but if your using one of these you should be able to figure it out
Predador
Reviewed in Spain on June 17, 2024
EN PRIMER LLOC, LA FABRICACIÓ NO ES GAIRE PULIDA, LES REBABES DE FERRO ABUNDEN (DE FET EM VAIG TALLAR AMB UNA D'ELLES MENTRE HO MUNTAVA, RAO PER LA QUAL, RECOMANO POSAR-SE GUANTS DE PROTECCIÓ, I TENIR LA SUFICIENT PACIENCIA PER ANAR ELIMINANT-LES AMB UNA LLIMA) LES SOLDADURES, SOBRE TOT DE LA ZONA CORRESPONENT A ON ES SUPORTA LA PART DEL COS, SON SIMBÒLIQUES... UNA PUNTADA MIUSCULA FA LA FEINA... HE HAGUT DE REFORÇAR-LES PERSONALMENT.AQUESTA PLATAFORMA LA FAIG ANAR BÀSICAMENT, PER MUNTAR UNA MAQUETA DE TREN QUE VA ADOSADA A LA PARET PER 3 COSTATS, I FA 1'22M D'AMPLADA, PER LA QUAL COSA PUC ARRIBAR A LA ZONA MES ALLUNYADA DE FORMA PRECARIA I NO TAN CÒMODA COM PENSAVA...EL PETIT MATALASET D'ESCUMA ON ES SUPORTA EL COS, ES BASTANT PRIMETA, PER LA CUAL COSA NO ES POT ESTAR GAIRE ESTONA SEGUIDA TREBALLANT, SENSE PATIR DOLOR DE COSTELLAM.FINALMENT, OCUPA BASTANT DE LLOC. I PER UNA PORTA DE CASA 70-80 cm NO PASSA, S'HA DE DESMUNTAR UNA DE LES DUES POTES AMB RODES.POTSER PER UN TALLER POT RESULTAR UTIL, PERÒ NO ESTA PENSADA PER LA LLAR.SALUT!!
carolyn
Reviewed in Canada on May 1, 2024
Easy to assemble and came quickly. Fantastic product!
Santos
Reviewed in Canada on March 20, 2024
The media could not be loaded.
Brad Lustig
Reviewed in the United States on December 13, 2024
I have had mine for a while now, but the wheels are definitely the weak point. One wheel folded completely over while I was over an engine. And I'm just 200lbs. It was the step side wheel so must have happened when climbing up and down. Only noticed it was not wanting to push straight then after using noticed the wheel was almost parallel with the ground. So have to find a decent upgrade for the wheels. Frame is good, no issues with welds that I've seen on mineSpoke too soon! Went to check the wheels and see what I needed to order to replace. Wheels are fine. The weld holding the nut the wheel screws into failed. Only 3 spot welds and one didn't even touch the side
txlady
Reviewed in the United States on November 24, 2024
Got this to save my back since I had a big job to do over my Ram 3500 dually 6.7L diesel engine to install a Banks Monster Ram which took about 12 to 15 hours to complete.This creeper was very steady and stable and definitely save my Back. No back pain after working over my engine bay for 2 days. Definitely a back saver!On delivery and unboxing the assembly was pretty straigh forward and didn't take long at all tightening all the bolts and nuts with my Milwaukee cordless ratchet.1 minor draw back only because the screws they give you to install the cushion to the top of the creeper are to small and pulled out within 1 hour of 1st use. I installed some bigger 5/16 head short screws i had so no big deal and the cushion was secure in place for the rest of my repairs. Nice creeper for the price and have 1 more job on my lifted Jeep to use it on to update the oil cooler housing. I recommend it, it worked excellent for me and the cushion platform height adjustment makes it versatile to use on many engine jobs.
LungMei
Reviewed in the United States on December 20, 2023
I weigh about 215 lbs currently. This thing holds me up over my lifted Duramax, which is about 5' 4" just to top of the grill. It has plenty of height left, it can go quite a bit higher. I bought this one for that reason. I was afraid shorter ones wouldn't reach up over the engine bay on my truck. My wife disappears when she walks in front of my truck, so I knew I needed reach.The padding is ok, but mine was damaged when it got here. Also comes with terrible instructions, so I had to figure out on my own where all the bolts went. Prepare to be super frustrated!Once together, it's actually pretty sturdy. Once I have it rolled up to the truck at the right height and the wheels locked, it feels pretty good. I don't like the wheels themselves. They're a hard plastic that I feel has poor grip. It can wiggle around when you're on top of it. The locks are pretty easy to actuate, so that part is nice. I just wish they gripped the ground a little better.That said, I have full confidence in it after using it for a while. It holds me over the engine with no problem. Again, padding could be better. We're not designed to have all of our weight on our chest for extended periods. This sure feels better than the steel fender. Leaning on the fender left my chest hurting for days!I like the pouch for tools. It can be helpful, but can also be a pain to get stuff in and out of when you're laying close down on the engine.The stand rolls easy, and can be stored folded up to take up less space. It's a real life saver when you've got to work in an engine bay on hard to reach stuff. I'm super happy to have it. I don't really know how I lived without it for so long.
Recommended Products