Your cart is empty.
Your cart is empty.Product Description
Superior Design
Engineered in the United States and backed by decades of automotive aftermarket experience. Each lug nut is designed to replicate factory design and performance.
- Thread: M14x1.5
- Finishes: Black & Chrome
- Height: 45mm (1.77")
- Width: 26.5mm (1.20")
- Pieces: 24
Durable Steel Construction
Our lug nuts are made from high tensile steel for reliability and strength that meet and/or exceed factory load standards. Most common factory lug nuts incorporate a sheet metal cap that will swell from removal and installation. Swelling will prevent engagement with a socket used for removal and installation making them difficult to remove and/or install. Our lug nuts are designed for greater reliability and will not swell from removal and installation.
Always Use AMAZON CONFIRMED FIT to verify fitment
Compatible with the following vehicles:
- Buick - Enclave 2008-2023
- Cadillac - Escalade 2008-2022 | Escalade ESV 2008-2020 | Escalade EXT 2008-2013 | SRX 2010-2016 | XT5 2016-2019 | XT6 2020-2022
- Chevrolet - Avalanche 2008-2013 | Blazer 2019-2022 | Colorado 2015-2022 | Silverado 1500 2008-2022 | Silverado 1500 LD 2019-2019 | Silverado 1500 LTD 2022-2022 | Suburban 2015-2022 | Suburban 1500 2008-2014 | Tahoe 2008-2020 | Traverse 2009-2022
- GMC - Acadia 2008-2022 | Acadia Limited 2017-2017 | Canyon 2015-2022 | Sierra 1500 2008-2022 | Sierra 1500 Limited 2019-2022 | Yukon 2008-2022 | Yukon XL 2015-2022 | Yukon XL 1500 2008-2014
- Jeep - Grand Wagoneer 2022-2023 | Wagoneer 2022-2023
- Ram - 1500 2019-2023
- Saturn - Outlook 2007-2010
Seat Construction
Seat is designed to match the factory lug nuts design to ensure even distribution of the clamp Force. Seats are checked during the manufacturing process for correct angle and concentricity during and after the manufacturing process.
Precision Threads
Provides better thread engagement that withstands the rigors of daily on-the-road driving. Threads are checked during the manufacturing process and final inspection using Go/No Go Gauges to ensure proper thread engagement.
Material & Finish
During the manufacturing processes, goods are tested and inspected during each phase of the process. Finished goods are then subjected to a final inspection by our quality inspection team checking measurements, threads, finish, overall appearance, and packaging. Applied finishes are subjected to standard 48 Hour Salt Spray Test to ensure a lasting brilliant finish.
Brian Dollar
Reviewed in the United States on March 7, 2025
Worked great
Customer
Reviewed in the United States on March 17, 2025
Changed my chrome hubs and need new nuts. These looked good and worked great.
buzz
Reviewed in the United States on February 11, 2025
Fit and work great
BC Customer
Reviewed in Canada on August 20, 2024
fits correctly and are solid. Good looking.
Belal
Reviewed in the United Arab Emirates on May 28, 2024
Great quality looks great in car. Looks better than the OEM.
afrhino
Reviewed in the United States on October 26, 2024
I was recently told that my lug nuts were swelling, when I was having brake work done. Originally thought it was an attempted upsell, until I read a little on the forums, and tested my lugs with my sockets at home. Some of my lugs required a socket three sizes up, just to slide on. These new lugs went on with zero issues, and in my opinion, look better than the originals. I took the old ones off with an air wrench and a breaker bar. I put the new ones on by hand and torque them by hand. No chipping, flaking, or scraping of the chrome on install.
Sam79
Reviewed in Mexico on April 27, 2024
Buena presentacion, las puse en un mustang 2016, buena calidad y se sienten bien hechas
brian Kinsler
Reviewed in the United States on April 18, 2024
The lug nuts fit correctly but the black electroplating or whatever is not sturdy. I had to touch up paint and to make them look good again. I did use tape on the lug nut wrench to protect the rest of them They do look better than the the chrome originals. I am satisfied.
Gordon Rae
Reviewed in Canada on November 29, 2023
Very happy with them. They fit and. Look great on my 2011 gmc 3500hd.
ryan2366
Reviewed in the United States on October 31, 2023
The paint on these will chip exposing the metal and they will rust.UPDATEOk Ryan, even though you are out of the 30 day return window and the 1-year warranty. We'd like to tell you that it's clear they have been installed with a pneumatic gun... and unfortunately, that's why they've started rusting. Please keep in mind we have plenty of years of experience and we are 100% sure on this. After more than a year and a half... have you had the tires rotated? cause perhaps you did the installing perfectly, but the shop that rotated the tires, used the impact gun and produced the rusting afterwards. Also, don't forget to keep in mind the extreme weather conditions. Although, it's clear in your case, that it wasn't the issue.Thank you!I find your tone very accusatory and in no way a customer service resolution. If you look at my original review shortly after I installed the lug nuts “by hand” I identify that they chipped and would likely rust.It turned out they did rust at which point when my vehicle was serviced I did not provide instructions to refrain from using an impact gun.The weather conditions where I live are not “extreme” as you suggest. Perhaps you should educate yourself, I live in Vancouver where we are lucky to get snow 3 days, not in AntarcticaPlease find the attached pictures of when I first removed them to put on winter tires.I’ll just take the customer service issue up with Amazon
gary
Reviewed in the United Kingdom on April 8, 2023
I purchased these for the USA, As the would have cost me £80.00 to buy from Ford dealer in the u. I am very pleased with product.
BagAJellyDonuts
Reviewed in the United States on April 4, 2021
Like so many others, own an older vehicle the came from the factory with 2 piece lugnuts. IOW, a stamped "coat" is installed over the the tradition nut. Well, corrosion starts between the stamping and the nut. The "coat" swells and makes it difficult if not impossible to use the lug wrench or socket to remove or install the nuts. So people are removing and replacing the factory nuts with a one piece lug nut. At this point, don't know how the plating will resist surface corrosion but these can't "swell". But that isn't the issue entirely. Be careful what you order. There are many sizes of lugnuts and matching them can be confusing. The thread size and depth make all the difference in the world. Since these are closed end nuts, if you get too short of a nut, the lug stud will bottom out and the wheel will loose or the end of the nut will blow out or the stud itself will strip. And the outer dimension of the nut if not matching the original size will make the factory wheel lug wrench impossible to use. I had to return the first set because while the thread size was correct, the nut size wasn't. And even at that, the fitment guide did not recognize that. IOW, don't count on the Amazon "it's going to fit" guide being always right. Other than that, these nuts appear to be be good quality, Curse is these days, if you don't use a proper tool to install these you may distort some of the plating. If possible use a flank drive 6 point impact socket. That vastly reduces the load on the tips of the nuts. And torque then on install and after a couple days of driving.
kevin
Reviewed in the United States on July 11, 2020
My new lug nuts came packaged very well with a foam insert in the box with cut outs for each lug nut so they show up as manufactured. they came with a slight coating to protect the finish and to give them some corrosion resistance while sitting on the shelf.These are inexpensive Chrome lug nuts you will not get a show quality lug nut for the price ( under close inspection you will see a bit of waviness to the finish but unless you are standing on your head they look as good as any much more expensive lug nut I have ever seen. Yes they are chrome so this means they will require wax to prevent them from rusting. if you wash your car with lots of soap that strips off the wax they will need to be re coated with wax again. if they ever rust it will be because I allowed it to happen.I will admit this is the second set of lug nuts I ordered for my truck, the first set they sent me was much more expensive 4" long blue spike lug nuts meant for 8 lug aftermarket wheels. In trying to resolve this all I wanted to do is have them send me the correct lug nuts and I would send them back the lug nuts they sent by mistake. instead my Credit card was refunded and I was told to just keep the wrong lug nuts and if I wanted to order the correct set again they would make sure they were sent out correctly this time. it was a pain but I did finally get the right lug nuts and my truck looks great again. So I give them 5 star for everything from fit to finish ( considering the price ) had they cost more I would have expected more. 5 Star for packaging 5 Star for customer service but it left me feeling bad for the manufacture that they lost a much more expensive set of lug nuts that I cannot use and no not want . ( and I would have been happy to mail them to a customer on their behalf ) yet they will just sit on my shelf until one day I buy a set of aftermarket wheels .
Recommended Products