Your cart is empty.
Your cart is empty.Product Description
3-Dot Night Sights feature self-illuminated tritium lamps in both front and rear sights. Visibility is enhanced for both day and night in any lighting condition.
The front sight features a high contrast orange photoluminescent Glow Dot, allowing for fast acquisition of the front sight, any time, day or night.
The proprietary Glow Dot on the XS Sights 3-Dot Night Sights is durable and long-lasting. The Glow Dot is highly resistant to gunpowder residue and common firearms cleaning chemicals.
Joseph
Reviewed in the United States on March 5, 2025
They're cheap and they work, picked these up on sale. They are not as bright as the R3D variant so keep that in mind.
@frhetoric85
Reviewed in the United States on March 2, 2025
Bought this for my Taursu G3C but the front sight screw was stripped so I couldn't get the sight on. But I've used XS sights before and I'm a fan. Made out of iron, great sight picture if your like this kind, and options on the sight picture. Great price for the quality too.
SCG
Reviewed in the United States on February 19, 2025
Wow, great product! I purchased these sights as replacement for the factory sights on my Glock. My eyes aren't what they used to be from when I was younger, so I was looking for a front sight that was easy to pickup and bright glowing at night. Easy install with my sight pusher and front sight tool. literally took less than five minutes. I must say, I was pleasantly surprised by how bright these sights are at night. Much brighter, in fact, than some much more expensive sets for sale by other companies. The front sight is especially bright, both in day light and in the dark. I found it very comfortable and quick to come up on target. Loved that fact that this is a family owned American company from Texas. Undoubtably, I will be using this company to replace all my future sights.
Aaron
Reviewed in the United States on January 19, 2025
Great sight acquisition, especially at night. My favorite part about this purchase was the customer service. A gunsmith had installed these sights for me, and he apparently didn’t use any loctite, because the front sight fell off and was lost when I went shooting. I contacted XS Sights and they sent me a new front sight with the installation tool and loctite, even though the loss was my fault. Great people to work with! I would get more of their products without any reservations.
James Tennyson
Reviewed in the United States on November 13, 2024
These sights are well made and easy to install on your Glock if you have a Glock front sight tool. The rear sight isn't hard to install if you have a hammer and brass drift punches. They glow well at night and the fluorescent orange ring around the tritium vial glows well in daylight.
Jason
Reviewed in the United States on March 3, 2023
Perfect fit for a Glock 43X. To be honest, I'm not big on night sights (rely on a flashlight in the dark), but these were priced right compared to other metal sights. I'm glad I made this purchase, because I see the value in these in daylight/low light conditions.Just pay careful attention to the install instructions, and you'll be fine. I have a vise, but found it easier to install the rear sight laying the slide on the side, on a hard surface (I have ceramic tile in my kitchen/bathrooms/utility room), and tapping in using a nylon punch and a ball pein hammer. I used painters tape and shop towels to protect the finish on the slide while removing/installing the rear sight. It was a tight fit, but if you place the point of the punch on the base of the sights, it drives the rear sight home. Just be patient, and be careful.I recommend using a caliper to align the rear sight. I also marked the rear site groove on a piece of painters tape placed on the top of the slide, in front of the rear sight to give me a visual alignment cue. Low tech, but very effective.The front sight is simple to install, just follow the instructions and be careful not to over-tighten the hex screw. Be aware the front sight wants to turn once the screw begins tightening to the slide. I applied counter pressure to the sight opposite the direction of the turn to stabilize, and keep the front sight straight.Use the included thread lock as instructed on both the front/rear sights.XS provides firearm rated thread lock and a complimentary packet of Lucas gun oil. I found that a nice touch.The sights themselves are really nice. Made of good quality alloy, much better than the stock polymer sights. The rear tritium dots are not as big as the front sight...which I really like. Helps draw focus to the front site. The front sight has a light activated orange ring and a tritium center. Really good sight picture in daylight without the glow, and a nice glow in low light/night conditions. Keep in mind I rely more on a flashlight at night....because you absolutely positively got to identify what you're potentially engaging. I'm relying on these for low light conditions with some ambient light in the background. As a guy who really enjoys putting holes in paper plates (cheaper than targets!) as a healthy outdoor sport...my aging eyes are thanking me for these!Very pleased with this purchase, and glad to support an American business in Texas!
Roadrunner
Reviewed in the United States on July 12, 2022
I installed these on my new Taurus GX4, a micro nine that Taurus cut to match the Glock's slide dovetails. I almost bought just the front sight, for what is essentially point shooting. But adding the rear sight only added about $15 to the purchase price so I figured, "why not?" The orange front sight is large and easy to see in daylight or pitch dark. The rear sight dots are not as bright, in fact they are tiny, but they are indeed visible at night so worth the little extra money. You can choose different colors to surround the front tritium insert. I used a Glock front sight tool from Tru Glo but found it didn't work too well on the Taurus. Like one You Tube reviewer, I tightened the inside screw with a pair of needle nose pliers.
Recommended Products