Your cart is empty.
Your cart is empty.Stray_Bullet
Reviewed in the United States on March 1, 2025
I recently purchased this SFF-8644 to Mini SAS SFF-8088 cable, and I couldn’t be happier with my experience. The cable was packaged securely and arrived in perfect condition. The build quality is excellent, with a durable design and solid connectors that fit snugly without any issues.After connecting it, everything worked flawlessly—data transfer is fast and stable, with no connection drops or signal interference. It’s clear this cable is well-made and designed for reliability. If you need a high-quality SAS cable for your storage setup, I highly recommend this one!
David S
Reviewed in Australia on February 9, 2025
New server arrived with a 12 Gb/s SAS HBA.Old server has a 6 Gb/s SAS HBA.This was exactly what we needed to avoid having to put an old HBA into the new server or replace the existing and very expensive peripheral.And it was at a better price than the server supplier could offer!
Baloptimus
Reviewed in the United States on January 30, 2025
This Mini SAS cable has a sturdy feel and provides reliable data transmission. I used it for my RAID setup, and it performed flawlessly—no drop in speed, no signal interference, and the connectors fit snugly without any looseness. The braided exterior adds to the durability, and it’s clear this cable will hold up well over time. If you need a high-quality SAS3.0 cable for server, SAN, or RAID configurations, this one is worth considering.
Ian
Reviewed in the United States on September 30, 2024
I got this to connect to my Supermicro JBOD via a LSI 9207-8e HBA. This cable works flawlessly, as expected.
Kunde
Reviewed in Germany on November 22, 2024
Long enough for my need.Connecting a dell md1200 and a dell md1220 to a dell perc.
Sebastian S
Reviewed in the United States on November 15, 2024
Does the job, works well with Dell equipment
Rahil M.
Reviewed in the United States on October 29, 2024
Cables seem to be high quality and lock in as expected. I plugged them in to a JBOD and all the drives were immediately picked up with no problems.
John Venice
Reviewed in the United States on October 23, 2024
I picked this up to test if I had a failing cable, card, or controller in a DAS unit. The cable itself came in a reusable package and looked to be good quality, albeit slightly thinner than the EMC cable it was replacing for testing. After installing it, everything worked as expected, no issue, no increase in errors or anything to the sort. In the end my problem turned out to be a controller, but this cable is still the one I'm using and I've relegated the EMC cable to the back shelf as this one is much easier to cable manage, insert, and remove.
Weck
Reviewed in Australia on March 24, 2023
Poor quality cable which does not work. Compared to another cable that I have, the connector is not robust and does not snap securely.
RC
Reviewed in Japan on February 25, 2023
Work as intended. Needed to connect 4jbods and 18 lto 6 tape drives to a server through lsi9300 cards and these cables do the job fine. Title says three pack, it's not, just a single cable which I'd assumedb was the case based on the price
Mohammed Al-Natour
Reviewed in the United Arab Emirates on November 20, 2021
Good item
Customer since 2002
Reviewed in the United States on September 22, 2020
Changed from 2-star to a 4-star review as the issue got solved but the design of the plug isn't perfect.The problem I had was that only one plug latched properly, the other one was loose and didn't latch at all.I've noticed that the socket on one of the devices was poorly designed and allowed the cable's plug to be inserted with a wrong orientation (180 degrees) which in turn caused a part of the plug to bend slightly and that resulted in the connector not latching.So I'm giving it 4 stars because I feel the connector should have some kind of protection against getting damaged byt the socket, but otherwise it's a very good product.
Reviewer JR
Reviewed in the United States on February 5, 2020
UPDATED REVIEW (March 29, 2020):After discussions with the manufacturer, and performing additional tests, it was determined that I had received an older version of the cables. They sent me the newer version at no cost. After testing with the new cables, which included a lot of cable movement / adjustments while the RAID arrays were built and running, there were no dropped drives or reliability issues at all. Everything worked perfectly. I'll also add that it was a real pleasure working with the supplier, as they were very professional and friendly throughout the process.As such, I've changed my review from 2 stars up to 5 stars.I would do business again with 10Gtek in the future, and recommend them.________________________________________________Previous post from February 4, 2020:(***NOTE: This is the outdated report that does not contain all the information and does not reflect current perspectives. It is only retained for historical purposes.)I have two LSI MetaRAID 9361-8i cards in a VMware host, each which are linked to an Intel 36x expander card. I have two sets of cables (four cables in all) in order to connect those expander cards to an external chassis.I first purchased a set of cables from another manufacturer that were twice the cost of these ones. When I came across these cables by 10Gtek and saw the much lower price, and the high user ratings, I thought these would be a great purchase for the second expander card. Both sets of cables have been in operation for a couple months now.Verdict:These less expensive cables have dropped connections numerous times, causing arrays to have to be rebuilt. Thankfully we haven't lost any data yet. Any time these cheaper cables are even bumped or moved a few inches in the middle portion of the cable (without touching the connection points), they almost always lose disks in the array, causing degraded arrays, and greater risk to losing data.By contrast, that has never once happened with the more expensive cables from the other manufacturer: even when moved, those expensive cables consistently maintain their connections to the drives.
Recommended Products
