Your cart is empty.
Your cart is empty.Product Description
Specifications:
Material: Zinc plated carbon steel
Type: Hex socket screw-in
Package Includes: 20 pcs x Insert Nuts
Description:
An insert nut provides a threaded socket for a wooden workpiece, similar to a wall anchor. These insert nuts are inserted into a pre-drilled hole by screw in, in that case the external protrusions bite into the wood, preventing the nut from either turning or pulling out.
Features:
These insert nuts are made of high quality zinc plated carbon steel for durability and rust protection. Screw-in insert nuts have an external thread and hex socket drive are screwed in with a hex key wrench. Insert nuts are advantageous over barrel nuts and T-nuts, because they can be installed from one side of the work piece. There are screw-in insert nuts in different sizes and take different sizes that you can choose for your project. The pre-drilled hole must be as deep as the length of the nut plus any portion of the bolt that may be screwed past the end of the nut in the work piece.
Zach
Reviewed in the United States on March 19, 2025
Worked perfectly and have held up for the couch legs I had to fixUsed some glue, screwed these into place, let them set, and then screwed the legs into place. Zero issues
PersonWhoBuysThingsOccasionally
Reviewed in the United States on March 1, 2025
I used these screw inserts is an oak project to install casters and they worked great. Some important tips: a drill bit and hex key are not included. You will need a 7/16th drill bit for these inserts to fit them properly. 7/16th is not a standard size in most drill bit sets in the US, so you may need to buy one. You can find them on Amazon or your local hardware stores. The hex key size you will need is 8mm. Also, if you really want for these inserts to sit flush with a hard wood, I suggest drilling a very shallow hole to start using a 9/16th drill bit, before drilling the full depth hole with the 7/16th bit. Bits with a brad point will help you to keep the two holes perfectly aligned. If you try to tighten down on screw inserts like these so they are flush with a hardwood without a countersink of some sort, you risk damaging the top of the screw inserts. A simple extra step solves the problem.
Marco Núñez
Reviewed in Mexico on January 20, 2025
Estos insertos roscados son de buena calidad y dureza a diferencia de otras marcas que prácticamente apenas puedes atornillar a la madera y la parte exagonal se barre , con estos insertos no pasa , si necesitas rectificar para atornillar bien aliniado podrás apretar y aflojar más veces que un inserto de baja calidad.
Matt
Reviewed in the United States on July 14, 2024
I could not figure out what size of drill bit to use for the 8mm insert. 1in was too big and I couldn't get the insert screwed in with smaller bits as I worked my way up. Tried epoxying the insert into place and I'll see what happens when it dries.The instructions also state to "use our allen wrench" to screw in the insert, which I thought meant that it was uncluded. No allen wrench came with my inserts and I dont see one sold separately. I just used another 8mm nut and bolt to attempt to seat the insert.
Provost Grégory
Reviewed in Belgium on March 18, 2024
-
Daniel
Reviewed in Mexico on December 6, 2024
Fueron exactamente lo que necesitaba para modificar un mueble.
KBo2Go
Reviewed in the United States on November 30, 2024
I purchased a piece of furniture that required assembly. I did not get it assembled or built quickly. One of the inserts were missing.I ordered this kit and it worked as needed.
Edgar
Reviewed in the United Kingdom on January 14, 2024
Very soft material, even on softwood you got to be very careful driving that in. Have to make quite specious hole. Wouldn't recommend for serious projects
Customer
Reviewed in the United States on December 24, 2021
These are an exceptional quality for the price they are actual steel not casted so they have the strength needed for hardwoods and go in very smoothly. I used a little paste wax when inserting and they glide right in and are solid.
Stefano
Reviewed in Italy on April 18, 2021
Presi piuttosto lunghi per questioni di solidità, semplici da inserire.Ho preso quelli con foro M6.Messi in legno stagionato di quercia.Il foro per inserirli nel legno invece l'ho fatto da 10mm di diamentro, minimo!Prima foro con un 8mm e poi passo con 10mm, avvito l'inserto ed è fatta!Ovviamente avvito con una brugola a mano, niente avvitatore o rischio di spaccare qualcosa. Il materiale di cui sono fatti non è ottimo in quanto rischia di deformarsi ma una volta dentro è solido.L'unica pecca è che COSTA TROPPO!Ma d'altronde non li ho trovati altrove...vanno bene ma non li ricomprerò più qui, forse dalla cina.
Recommended Products