Your cart is empty.
Your cart is empty.Product Description
Package includes:
- 25 x Window Screen Plunger Latches
25 Pack Window Screen Plunger Latches
Specifications:
Color: white
Material: aluminum, plastic
Size: 5/32" x 1-1/2"
Features:
- These window screen plunger latches ensure the window screens stay firmly in place, no matter the weather.
- The window screen plunger pin kit contains 25 sets of parts to meet future replacement needs.
- Compatible with a variety of window screen types.
Michael Rose
Reviewed in the United States on March 18, 2025
Worked as expected.
PM
Reviewed in the United States on March 12, 2025
Work as they should
M
Reviewed in the United States on September 1, 2024
The spring is too large in diameter. It has a diameter of 0.165” and the larger shaft diameter is 0.156. The issue is the drill bit to use is 5/32 which make a 0.159 hole. The spring should NOT be larger than 0.156. WYou can get the spring in with a little finesse by twisting the spring and using a tiny screwdriver to press it the rest of the way. I wouldn’t buy it again and I would send them back but I only have 12 pins to put in my 3 new screens. I will say to fix this issue, you could use a 3/16 (which is the next drill bit size up) but it will be a little sloppy in the hole and will work fine.FYI, the smaller diameter of the pin is 0.120” and a 1/8” drill bit works great for the inside walls of the screen frame.
Lisa Wells
Reviewed in the United States on August 21, 2024
They were so easy to use and cheap fix. Even my grand babies help put these together. Who knew it would be so easy to fix all my missing screen pulls!
Laurie
Reviewed in the United States on July 20, 2024
There were no springs in the package.
Char
Reviewed in the United States on July 2, 2024
Exactly as described and easy to install.Directions come with boxed set.
Robert P.
Reviewed in the United States on June 24, 2024
These pins were a perfect replacement for the original all-plastic Marvin Window screen retention pins on my Marin Integrity window screens. No drilling was required; it was only necessary to break the tops off the original pins in order to remove them.The original pins usually fail on the non-handle end when the screen gets forced out by someone who does not know how to properly remove the screen from the window frame. This leaves the top of the pin and spring mechanism in place, but no protruding pin on the outside of the screen to hold it in place in the window frame.Installation required only breaking off the pin handle (pull knob) of the old pin(s), and removing the remaining portion of the original pin(s). No tools required. Once the old pins were removed, the new plunger pins fin perfectly into the original Marvin pin holes without drilling, and the new pin knobs were pressed onto the new pins while holding the pins compressed. Again, no tools required.
Grammy 8
Reviewed in the United States on October 14, 2024
We have old screens on our house and all the fasteners were broken or rotted. These worked perfectly, easy to install.
Recommended Products