Shopping Cart

Your cart is empty.

Your cart is empty.

3Pack Blink Outdoo 4 Camera Mount Bracket,Compatible with Blink Outdoor 4 Camera and Blink Outdoor 4 Battery Extension Pack,Blink Outdoor 4 (4th Gen) Accessories

Free shipping on orders over $29.99

$15.99

$ 6 .99 $6.99

In Stock

About this item

  • 【Designed for Blink Outdoor 4 camera】This accessory kit is only for Blink Outdoor 4 camera. It protects the Blink Outdoor 4 camera from various weather changes in different environments and greatly improves the life of the device.(This is the Blink Outdoor 4 installation accessory, the camera is not included)
  • Compatible with Blink Outdoor 4 camera and Blink Outdoor 4 Battery Extension Pack(Package includes 3Pack Blink Outdoo 4 Camera Mount accessories to mount up to three cameras)
  • 【Mounting bracket】Easy to use 360° rotating view without blind spot, can be adjusted to any angle as needed. With the screw mount base, you can mount Blink Outdoor 4 camera on walls and ceilings, trees or other places where screws can be installed.
  • The protruding design on the front cover can block the rain to cover the camera lens. The case provides protection against snow, sun, rain, theft and animal attacks.
  • 【Package】Package contains wall mount x 3, weatherproof housing x 3, not including the camera ,blink sync module 2 mount x 1,blink sync module 2 Charging cable x 1. If you have any questions, please feel free to contact us.



Product Description

Blink Outdoor 4 (4th Gen)Camera Mount Compatible Battery Extension Pack Mount

Blink Outdoor 4 Battery Extension Pack Mount

Weatherproof Protective Housing and 360 Degree Adjustable Wall Mount

Blink Outdoor 4 Camera Mount

Blink Outdoor 4 (4th Gen)Camera Mount

Blink Outdoor 4  Mount

Blink Sync Module2 Mount

Blink Sync Module2 Mount

Terry J
Reviewed in the United States on March 6, 2025
The camera with the extended battery doesn’t fit inside these covers. I even took off the back battery cover to allot some space and still nothing, the weather cover doesn’t allow for proper fitting with an extended battery 😕
Bradda Cuz
Reviewed in the United States on March 14, 2025
Excellent product and exactly what I needed. Easy to mount and secures your camera and extended battery.
Kimberly
Reviewed in the United States on February 21, 2025
Works well with expanded battery pack. More range of motion than original mounts
Dr-Phone
Reviewed in the United States on September 12, 2024
I'm totally blind. I got this for use with my Blink outdoor 4 camera and Blink outdoor 4 battery pack. This is what I found. I normally do not ever give 5 star reviews being normally things do what they say and a lot of the time don't meet that all they way and ahve slight issues.Being I'm totally blind! I wanted to let people know the following being the discription doesn't say this. The camera holder does screw onto the mount with a 1/4 inch camera mount screw and this is what I wanted. A lot of others just use the cheep Blink buckle snap that I fell will not hold up in bad weather if you get SNOW, High wind, and or ICE. That is probably great for indoors or in nice weather.But anyway! You first need to put the Camera mount up with three screws. Then you put up the camera holder on the mount by screwing it on the mount. After that is done, you put the camera into the holder and put the face plate in place by putting the top of in in place first and then snapping in the bottom of it.Now for the testing I did.I first tried this without any battery pack. You must put the foam insert in the holder first. Make sure you have it going from top to bottom. There are 2 razed guide rails to help with this. The foam insert has a hollow cutout in the middle and that should pointing out towards the face of the holder. Then you can put the camera in and snap on the face plate. This works well.I next tried the same way but plugged in a Flat USB C cable that has a right angle bend in it already. I ran the cable up through the bottom of the holder being there is a hole for that and plugged it into the camera. I next put the camera into the holder and was able to snap in the face plate with no issues.Next test! I took out the foam insert and tried the BLINK battery pack I got with my Blink outdoor 4 cameras system being I got the battery pack with it. I put the battery pack on the camera, screw it down snugly, put the cameras back on the battery pack and screw it down snugly. Then I put the battery pack into the holder and was able to put the face plate on with no issues.Last test. I have a 3rd party battery pack for the Blink outdoor 4 camera. Tried doing the same test. This time, like another reviewer said, the face plate wouldn't go in place for the holder. But again, this battery pack wasn't a true Blink battery pack but a 3rd party one.So make sure you have true Blink battery packs or this may not work for you! As long as you have Blink provided hardware; You shouldn't have any issue.
Review Ninja
Reviewed in the United States on September 12, 2024
The quality of the product is not great, but it works as expected. It provides additional support for the Blink camera to adjust the angle as needed, so your view can be perfectly aligned for recording.
Patricia Tabachuk
Reviewed in the United States on August 11, 2024
I had to get a larger battery pack, then housing to fit. 1 of 3 cameras purchased didn’t work after a month and needed to be exchanged. Looks good and is a clear photo.
Ryan
Reviewed in the United States on December 7, 2024
Super durable to the elements (high 90s to below zero). Hold up fantastically! Snug fit to the camera. Easy installment and removal for batteries. Not obnoxiously noticeable.
Alison Stover
Reviewed in the United States on December 3, 2024
Exactly what you need for Blink 4 Outdoor mount. I have the extra battery pack (4 batteries) and it fits nice and tight like you want it to be. Easy to assemble and mount around the exterior of my home.
Recommended Products