Your cart is empty.
Your cart is empty.Product Description
AMERIMAX HOME PRODUCTS 33047PK 7-Inch Screw/Ferrule, White, 10-Pack , Gray
From the Manufacturer
AMERIMAX HOME PRODUCTS 33047PK 10 Pack 7" White Screw/Ferrule. 10 Pack, 7", White, Screw With 5" Ferrule With Bit.
rkmuggsy
Reviewed in the United States on September 26, 2024
Existing hole was too large to use even these bigger spikes, so I just moved the new hole over an inch and drilled a new one through everything. Can even use the spike to drill the new holes. Making new holes and using these spikes should securely hold any gutter firmly.
Good Frog
Reviewed in the United States on September 24, 2024
These screws were the same as my previous order from another Amazon supplier who ran out of stock. I had already used a few of those before I ordered these from Chance's Hardware. In working with the screws from the previous order, I found that these gutter screws worked even better than I had hoped when replacing my older, loosened spikes. These screws say right on the package that they can go into the hole from the original spikes. I did that and determined that they work just fine. I plan to replace more spikes already loosened and even more as time and inclination dictate.I did have one small issue with this order, and Chance's Hardware quickly made things right. Iām quite satisfied with these gutter screws and more than satisfied with how Chance's Hardware customer service resolved the minor issue. I would buy from this supplier, again.
John Abild
Reviewed in the United States on July 9, 2024
These are far better than gutter nails or spikes.
W Rob
Reviewed in the United States on November 9, 2024
Very good, fast delivery
Jay Naik
Reviewed in the United States on April 21, 2024
Excellent product; fixed a sagging gutter guard quite well. Highly recommend it.
fromjustus
Reviewed in the United States on January 12, 2022
My rain gutter was starting to come loose from the eave of my garage, bowing outward. The original nails were hammered in, but over time loosened up and weren't holding any more. I bought these because the mounting hardware were screws, not nails, and the ferrules were a hard plastic, not thin metal tubes split down the middle. Both the original nails and ferrules were all the same length as the original hardware. Replacing the ferrules with the new ones and screwing in the new hardware was a cinch. The heads of the screws are white and are screwed in with a supplied 1/8" square head driver that works in either a 1/4" or 3/8" drill/driver. All 3 boxes of hardware I bought each came with a 1/8" square head driver, contrary to some other reviews that said that theirs didn't. Now it holds like it was glued in position, which it is not of course. But tightly rigid. A tip. If the screw seems a bit loose when you tighten it, remove the new screw, and put in the pointed end of a zip tie into the ferrule and the hole the screw goes in to, and cut off the rest of the zip tie. Then tighten the screw back up, and when the screw threads come in contact with the zip tie, it should hold very tightly I heartily recommend this hardware for this purpose. It's truly top notch with no shortcomings that I could find. It sure worked for me, and I used 35 new screws to do the job. Wouldn't hesitate to use them again.
Product test pilot
Reviewed in the United States on November 5, 2018
gutter had pulled loose from house in spots, The screws were slightly fatter than failed nails so used same holes and secured well...Easier to install than nails when the Gutter isn't exactly against the house and wants to spring the nail backwards Instead of puncturing sheet-metal... a lot of lost nails with the old product... screws were much easier and way more secure... each product takes its own required finesse.the screws pulled the lose gutter back to the house and was easy to get tight And made even easier with the well fitting bit included in the package.When starting new holes there was a small problem as the screw would go through the gutter sheet metal next to the house and pushed the gutter away, problem solved by running the driver backwards and it worked like a drill bit... old trick from my dad, also, it would catch in the wood if you put enough pressure on it... a little bit hard at the top of the ladder.great product would definitely buy it again... and I did :-)
M.B.
Reviewed in the United States on April 13, 2013
These worked well to repair my sagging gutter that my landlord never seemed to get around to fixing. With my Makita impact driver they went in quickly and easily. Note the head is a square drive, so if you don't own one you'll need to order one as well.I kind of wish they were a little longer (1/2" or so) to go further into the wood, but tugging on the gutter with moderate force didn't pull it out of the wood. I doubt these are stainless so rust may be an issue down the road, but at least they don't pull out as easy as aluminum nails and they're cheaper than the "hidden" screw hangers you can buy. These are all small issues.I'd give it 5 stars if the screw heads were powder coated or at least painted well enough they don't come out of the box already scratched. Didn't really matter for my application but other people may care.
Recommended Products
