Your cart is empty.
Your cart is empty.Product Description
The valve body is printed with clear information such as air inlet &outlet position and product model, so that you can use it simply and clearly.
All Products Are Directly Produced from the Factory to the Warehouse, We Ensure That Every Link, Every Process.
AOMAG 2 Position 5 Way Pneumatic Hand Pull Valve
Product Parameter
- Product Model: 4H310-10/4H210-08
- Type: Manual
- Working Medium:Air
- Port Size:
4H310-10: Air Inlet (P)=3/8"PT,Air Outlet(A B)=3/8"PT,Air Exhaust(R S)=1/4"PT
4H210-08: Air Inlet (P)=1/4"PT,Air Outlet(A B)=1/4"PT,Air Exhaust(R S)=1/8"PT
- Working Pressure Range:21Psi~116Psi(0.15~0.8MPa)
- Working Temperature:0~140℉ | 0~60°C
- Position and Port Number: 5 Port 2 Position
- Reaction sensitive handle
- Positioning accuracy
- Avoid homework injury
Product Features:
- The valve body is made of high-precision aluminum with high hardness and long service life.
- The thread of each hole is finely processed, burr-free, smooth, easy to install and impact-resistant.
- The valve body is quick to start, easy to operate, convenient to install and disassemble.
- The air inlet is equipped with a 0.04mm filter screen, which can filter most impurities and dust, keep the valve body clean and prolong its service life.
- The valve body contains high concentricity sealing ring, which is not easy to leak, and the rubber pad with lubricating oil reduces friction.
- 2 position 5 way manual valve has sensitive response and convenient opening and closing.
Pay Attention To:
- Please check whether the components are damaged before use.
- Please pay attention to the direction of gas flow during installation, and the medium used needs to be filtered by a 0.04mm filter screen.
- Please pay attention to whether the installation conditions meet the requirements (such as voltage, temperature, etc.)
- Try to avoid using this product in vibration environment.
- Please avoid dust and impurities from entering the valve body.
PRODUCT FEATURE
High Efficiency Filter Mesh
The Intake Port is Equipped with a 40um Filter Mesh, which can Filter Impurities in the Gas and Effectively Improve Work Efficiency.
Fine Threads
The Valve Body is Made of Pure Aluminum.Surface Oxidation Treatment, No Burrs on the Thread.High-quality Workmanship Ensures the Service Life of Products.
High Quality Seal
The Inside of Each Valve Body is Composed of High-quality Sealing Rings.High and Low Temperature Resistance.
Widely Used
Machinery Industry
Medical Industry
Textile Industry
Food Industry
manfred biedermann
Reviewed in France on August 24, 2022
acheté pour controller un cadre de thermoformeuse, se prète bien a mon attente, tit bémol, le neutre entre deux est très délicat a trouver, il faut un système extérieur pour ce faire sans problème.
daniel
Reviewed in the United States on October 14, 2022
Absolutely horrible item. First time I used it, it broke. Air leaks out of exhaust port.
Mark Zimmerman
Reviewed in the United States on May 6, 2021
Used with an air cylinder to crush cans works well
Rhino
Reviewed in the United States on March 9, 2021
The media could not be loaded.
SimonR
Reviewed in the United Kingdom on October 6, 2021
The valve itself works OK. I had a hard time getting the fittings to seal. I suspect the threads were inacurately cut so a taper thread would not seal. PTFE Tape and even LocTite thread seal also failed. Dowty seals worked OK though.Once I managed to get all the fittings to seal, the valve itself worked as I hoped.
Recommended Products
$33.41
$ 14 .99 $14.99