Your cart is empty.
Your cart is empty.Product Description
Type 'A' Hitch
Specifically built for Aosom brand trailers, this hitch coupler can be used with a number of different Aosom pet, cargo, or child bike trailers (see list below).
90 Degree Angle
This Type A hitch comes out at a 90 degree angle from your bike and is specifically designed to fit Aosom bike trailers.
Quick Release
This hitch allows for quick and easy release of your trailer from your bike so you can ride comfortably with or without a trailer in tow.
Built for Aosom Trailers
While this hitch is specifically built for our Aosom brand trailers, we cannot assure that it will fit other brands, however, customers have reported that other trailers can be used (see customer Q&A).
This Couple Fits the Following Aosom Bike Trailers
5663-0062, 5663-1289, 5663-1290, 5663-1291,5663-1334R-B
440-008BU,440-008OG
D00-098WT, D00-098BU, D00-051 ,D00-097
Specifications
- Composition: Steel
- Material Used: Carbon steel
- Color: Black
- Product Dimension: Tube Size:Φ0.66"x1.8"L; Connecting Hole Size:Φ0.4"
- Box Dimension: 4" L x 3" W x 1" H
- Gross Weight: 0.25 lbs
- Net Weight: 0.18 lbs
- Flat Pack: NO
- Assembly Required: NO
Daniel Brehm
Reviewed in the United States on March 7, 2025
Right part right fit.
BB
Reviewed in the United States on December 1, 2024
Goes great for my bike hitch
ChrisK
Reviewed in the United States on August 20, 2022
I ordered this part specifically because the one that came with our dog trailer wouldn’t fit the axle of our Lectric eBike. The picture shows the hole is 0.5 inches but it is NOT. It is about 3/8 inch. It’s bad enough that their customer service wouldn’t send the part we needed but to then buy it and it’s not as described is really annoying!
Patricia Marie Brown
Reviewed in the United States on February 2, 2020
Wow this item is great! I was at first nervous because I wasn't sure it would work on my Kinbor trailer. But it worked like a charm. At first I asked a local bike shop about getting a piece. I was told that I would have to get one from the same brand. I was confused because I wasn't given exactly the answer I needed. So I just took a chance. Looked up some videos to see what I needed and went from there. It works like a charm. I am Happy to have went with my gut on this one
big Dick
Reviewed in Canada on December 11, 2017
it fit the wagon,so it will work
Joe Bob
Reviewed in the United States on December 16, 2015
So, what are the numbers, since those details are lacking in the description?Had my bike stolen - they didn't get the trailer, since that was at home in my garage - but they might as well have, since my hitch was on my bicycle, making the trailer pretty much useless. So I tried this hitch, counting on Amazon's return policies, and lucked out, no thanks to the lack of dimensional specifications in the description. So, here goes, for those of you wondering if it will work for you.First, contrary to a couple of comments here, this will work for quick-release or nutted axles. Those who say they can't use it on their QR hubs are essentially clueless.As far as dimensions, the axle mount plate is about 4.65mm thick, although it is stamped thinner in a 20mm circle surrounding the axle hole. The thickness in that area is about 2.5mm. The axle hole in the mount plate is 10mm - adequate for most axles and could probably be drilled a couple millimeters larger for those of you with Godzilla axles. The hitch pin itself is 45mm long, It is 17mm (more or less, I actually read about 17.05 mm) in diameter. There is a 7mm hole in the hitch pin for the removable trailer latch pin, and the center of the latch pin hole is roughly 30mm from the face of the axle mount plate.Reading this, it's apparent I have a set of vernier calipers and WAY too much time on my hands.As I said, I got lucky, and will be getting another of these hitches, just in case. My trailer can be found by googling "0016BL", if that helps anyone.I have niggles - first, this isn't a precision product, The axle hole is stamped, rather than drilled. As a result, there is flashing sticking out of the axle hole on the side facing your bike frame, That flashing should be ground or filed flush. The hitch pin is fixed to the axle mount plate using a pressed, hollow rivet type attachment, which ends up leaving a slightly irregular protrusion on the inside face of the axle mount plate, This "flashing" should NOT be ground off - it might weaken the rivet-type attachment. Just try to be sure this protrusion doesn't overlap your dropout, or the face of the axle mount plate will not be parallel to your dropout. It should clear most dropouts, but if it does interfere it can be easily fixed by placing a washer of the appropriate thickness on the axle between the axle mount plate and the dropout to allow the mount plate to be parallel to the dropout.The second niggle is the pricing. Hey, ten bucks for something that gets your hundred-dollar trailer rolling again is good - but is this piece really 1/10th the cost of the whole trailer? Oh well... It works, my trailer is usable again, so I'm basically happy enough to get another one.
M
Reviewed in the United States on September 23, 2014
great hitch for the Aosom Bike trailer. The trailer itself is AWESOME for the price. I have 2 little ones and it's a great trailer. It comes with one hitch but I wanted another so my husband and I each have one on our bikes and I purchased it here. Does what it's suppose to do.
Anonymous 1
Reviewed in the United States on May 20, 2014
Since I ride an ebike at fairly good speeds and distance, I hitch up a trailer for grocery shopping off a charged electric battery. This and the trailer I got have performed excellently. This simply bolts onto the left rear wheel axel and has held up super well. I have three on three different bikes and no worries.
David Workman
Reviewed in the United States on May 29, 2010
Wife and I love the Aosome Bike Trailer... So we decided to get an extra coupler so we could both pull the kiddies around, Great product and easy to install. However I wish I would have ordered straight from the company... The order got lost so I finally recieved it a month and a half after originally ordered, I had to call the company. Once they heard I did not recieve it they rushed it out that day.... Great Customer Service!!!! I do recomend this product, just a little unsure of Amazon.com?
Recommended Products