Shopping Cart

Your cart is empty.

Your cart is empty.

ARB 750001 Competition Differential Cover for DANA 50/60 ideal for increasing the rigidity of the whole axe and protect the differential and ring and pinion set from any off-road hazards

Free shipping on orders over $29.99

$207.98

$ 92 .99 $92.99

In Stock
  • WHY BUYING ARB 750001 DIFFERENTIAL COVER FOR DANA 50/60: When off-road, it is inevitable that obstacles and off-road hazards will be encountered that could potentially inflict expensive damage to your differential. To prevent this, ARB manufactures the Differential Cover. Using high tensile nodular iron, it has been engineered to protect the differential and ring and pinion set from any off-road hazards.
  • IMPORTANT ARB 750001 FEATURES: Computer-optimized cross brace design increases the structural rigidity of the axle / Top quality neodymium magnets / Prolonged carrier bearing life / Magnet location in the end of the dipstick
  • BEST ARB DIFFERENTIAL COVER OF ALL: Computer-optimized cross brace design increases the structural rigidity of the whole axle / Unique dipstick/filler cap design allows differential oil level to be adjusted for customized high driveline angles / Prolonged carrier bearing life due to extra support to the bearing alignment / Top-quality, high-power neodymium magnets are used in both the drain plug and the dipstick to collect metallic wear particles as the vehicle moves
  • ABOUT ARB 750001 COMPOSITION: Made from ‎Super Thick Cast Nodular Iron, the engineering of the cover will prolong carrier bearing life because of the added strength to the bearing alignment. The dipstick/filler cap allows the differential oil level to be adjusted.
  • HOW IT OPERATES: High-powered neodymium magnets are attached to the drain plug. The dipstick collects the metallic wear particles. The magnet's location on the end of the dipstick allows the oil to be checked



Product Description

750001

Increase the rigidity of the whole axle

ARB 750001 COMPETITION DIFFERENTIAL COVER FOR DANA 50/60

  • Must have: Using high tensile nodular iron, it has been engineered to protect the differential and ring and pinion set from any off road hazards.
  • Kit includes: Fasteners, Drain plug & fill plug and Magnetic dipstick/ Fits: Dana 50/60 axles
Increase the rigidity of the whole axle

ARB 750001 COMPETITION DIFFERENTIAL COVER FOR DANA 50/60

When off-road, it is inevitable that obstacles and off-road hazards will be encountered that could potentially inflict expensive damage to your differential. To prevent this, ARB manufactures the Differential Cover. Using high tensile nodular iron, it has been engineered to protect the differential and ring and pinion set from any off-road hazards.

750001
The video showcases the product in use.The video guides you through product setup.The video compares multiple products.The video shows the product being unpacked.
750001

DANA COVER TECHNOLOGY

Computer-optimized cross brace design increases the structural rigidity of the whole axle.

750001

HIGH DRIVELINE ANGLES

Unique dipstick/filler cap design allows differential oil level to be adjusted for customized high driveline angles

750001

DURABILITY ABOVE ALL

Prolonged carrier bearing life due to extra support to the bearing alignment

750001

ABOUT THE MAGNETS

Top-quality, high-power neodymium magnets are used in both the drain plug and the dipstick to collect metallic wear particles as the vehicle moves

750001

TECHNICHAL FEATURES

  • Brand: ARB
  • Item Weight: 15 lb
  • Product Dimensions: 12.99 in x 12.2 in x 3.54 in
  • Material: ‎Super Thick Cast Nodular Iron
  • Color: Red
RK12

CUSTOMER REVIEW - AMAZON VERIFIED PURCHASE

"Construction is sturdy, definitely a piece of armor. The integrated dipstick and hole make maintenance and oil changes a breeze. Consider the lube locker gasket for quick maintenance jobs. Believe me, this thing works nice, looks nice, and is probably the best-constructed diff cover I've seen"

The video showcases the product in use.The video guides you through product setup.The video compares multiple products.The video shows the product being unpacked.

Team Venom Racing
Reviewed in the United States on July 11, 2024
Perfect fit. Working great.
Ian Miller
Reviewed in the United States on August 30, 2023
Nicely made.. strong. Plus the paint on mine is thick and won’t chip
Mario
Reviewed in the United States on August 23, 2023
Looks great nice an thick but on my 2002 ford excursion I had to cut off the bottom right ear other then that it’s perfect and the seal that was suggested with it is amazing lubelocker
Mark v.
Reviewed in the United States on June 10, 2023
I just went to install my Dana, 60 differential cover that I had purchased. I did purchase it as an open box. But I expect to get what is claimed to be in that open box. It is a Dana 44 cover because it's dimensions are roughly 10 by 9 in. It is far too small It is clearly obvious when you put it up to the correct gasket that I purchased separately in the suggested box below adding to the cart. I don't know what to do. It is past my return time but I paid a lot of money for something I can never use. I've been having multiple problems with Amazon lately, especially when it's from centers that aren't from them prime warehouses.
Matt
Reviewed in Canada on April 7, 2022
Nice HD Diff cover, easy install, looks great.
Sam
Reviewed in the United States on May 10, 2021
I was afraid to open it when I saw the box looked beat/opened but great news - everything inside seems great!
Horse-N-Round
Reviewed in the United States on January 21, 2018
Who doesn't like a little bling. Yes its a little expensive but as they say, you get what you pay for and this is a top quality cover. I got one for my Dana 44 and another for my Dana 60. It's heavy duty, fit my '78 F250 perfectly, had great hardware, a nice drain plug and dipstick with O-Ring seals. The design permits fluid to be added without leaking a drop. Spoil yourself and grab one or two for your rig.
Paul From GA
Reviewed in the United States on August 20, 2017
First off, let me say I think very highly of ARB products, however this cover was a huge disappointment. It's of good quality, solid steel, not put metal. Has a drain and fill hole, with a dipstick. Very nice features.Now the bad. It absolutely did not fit, without major alteration. I had to grind off the bottom right ear, to make it fit. I would expect this from a cheap cover, but for something in this price range, I am sadly disappointed. This should be an exact fit, with no modification. ARB really hurt my feelings on this cover. I have included photos to show what I had to do in order for it to fit properly. And my truck is a very common truck - 2000 Ford F250 4wd with the 7.3l.For the hefty price tag, you would have thought that ARB did all the proper engineering research to make this a perfect fit, especially for this common truck, but as I said, a real disappointment.I gave 2 stars for the quality of materials and features of this cover. If I didn't have to spend 30 minutes grinding out a significant amount of material, this would have been a 5 star review.Get it together ARB. Us 4wd guys love your products and should be promoting them as I usually do, but in this case, I can not do so.
Tadao Baba
Reviewed in the United States on December 25, 2012
This think is the biggest and heaviest diff cover I have ever handled. Made of iron, and lots of it. Excellent finish and quality, and the drain plug is a very nice touch, along with the dipstick. ARB has excellent customer service, which is always a plus.