Enjoy free shipping on orders over $29.99

US Dollar

0 $0.00

Your cart is empty.

ATO 3hp Single to Three Phase VFD, Single Phase 220V 230V Input to 3 Phase Output VFD 2.2kW Variable Frequency Drive for 3-Phase Motor Speed Control

4.7 (3) Write Review

Free shipping on orders over $29.99

$236.99

$ 99 .00 $99.00

In Stock

Qty.:

ATO 3hp single phase to three phase VFD, 220V single to 3 phase VFD, provide 3 phase 220V-240V household power for 3 phase motors, using ATO single to three phase VFD as phase converter to drive induction motors
【Parameters】ATO 3hp VFD 1 phase to 3 phase, input voltage: 1 phase 220~240V AC; input frequency: 50Hz/ 60Hz; output voltage: 3 phase AC 0~input voltage; output frequency: 0.00~1000.00Hz
【APPLICATIONS】ATO 3hp 220V single to 3 phase VFD, can be widely applied to drive the AC motor, such as fans, pumps, power tools, etc.
【TIPS】 A single to three phase VFD can convert 1-phase 220V-240V to 3-phase to power the three phase motor, also can reduce the inrush current of the motor during starting up
【CUSTOMER FIRST】If you have no experience in driving a VFD, be sure to refer to the instructions before operating a VFD.If you are not sure about the size or have any issue about the product or service, please don't hesitate to email us. We will answer you within 12h
【About Frequency】ATO 220V 230V single to three phase vfd, Input frequency: 47-63Hz (So 50/60Hz is supported); Output frequency: 0-400Hz (Default: 50Hz, if you need the output frequency to be 60Hz, please set: P0.02=60, P0.05=60, P0.06=60)

Product Description

ATO 220V 230V 240V single phase to 3 phase VFD VSD, 220V 230V single phase to three phase VFD variable frequency drive, convert single phase to 3 phase for AC motor speed controls, RS485 enabled. vfd 220v input 220v 3 phase output widely used in spindle motor, drill press, CNC, compressor, milling, HVAC, lathe, pumps, conveyors, cooling, fan, and three phase motor. etc.

Note:

The rated current of the ATO single to 3 phase VFD refers to the three-phase output current.

The input current of the ATO single to three phase VFD is approximately 1.5 times the output current.

How to choose a right VFD?

Except for the input voltage, there are two additional conditions that need to be met:

1. The rated current of the VFD should be greater than the rated current of your motor, preferably by at least 30%.

2. The rated power of the VFD should be greater than the rated power of your motor, preferably by at least one levels.

If you're unsure which VFD is suitable for your motor, please provide us with a photo of your motor nameplate, tell us the input power supply, and your requirements. We'll then recommend the appropriate VFD model for you.

Tips on ATO VFD with SN numbers starting with 9000:

Input frequency: 47-63Hz (so 50/60Hz is supported);

Output frequency: 0-1000Hz (Default: 50Hz, if you need the output frequency to be 60Hz, please set: P0.02=60, P0.05=60, P0.06=60, P8.04=60)

How to set the output frequency to 1000Hz?

set: P0.05=1000. P0.06=1000 P8.04=1000, P0.21=1

ATO VFD 220V Input 220V 3 Phase Output Common Specification

Capacity(Optional)	1/2 hp /1 hp /2 hp /3 hp /5 hp /7.5 hp /10 hp/15 hp/20 hp/25hp/40hp (optional）
Over load capacity	150% of rated current for 1 minute, 180% of rated current for 3 seconds
Control mode	V/F control
Communication	RS485
Speed regulation	1:100
Start torque	150% of rating torque at 1 Hz
Speed control accuracy	≤±0.5% of rating synchronous speed
Frequency resolution	Analog setting: 0.1% of max frequency; Digital setting: 0.01Hz
Torque boost	Automatic torque boost, manual torque boost 0.1%~30.0%
Interior PID controller	Be convenient to make closed-loop system
Automatic energy save running	Optimize V/F curve automatically based on the load to realize power save running
Automatic voltage regulation	Can keep constant output voltage when power source voltage varies.

Automatic current limiting	Limit running current automatically to avoid frequent over-current which will cause trip
Enclosure rating	IP 20
Temperature	–10℃~ +40℃; VFD will be derated if ambient temperature exceed 40℃; each rise 1℃, the derate will be 5%
Humidity	5%-95%, without condensation
Altitude	≤1000m; VFD will be derated if above 1000m
Impingement and oscillation	Normal running:<5.9m/s2 (0.6g); Transportation:<15m/s2 (1.5g)
Store environment	–20℃~ +60℃; no dust, no corrosive gas, no direct sunlight

What Real-life Problems can be Solved by using ATO Single Phase to 3 Phase VFD?

220v-240v Single to three phase VFD can solve the problem of power phase mismatch, that is, the power supply is single-phase, and the equipment uses three-phase power.
220V output VFD can solve the problem of power frequency mismatch, that is, the power supply is 50Hz/60Hz, and the equipment power consumption is 0.00~400.00Hz (arbitrarily set).

What are the Benefits of using ATO 1 Phase to 3 Phase vfd?

Reduce energy consumption and energy costs: Optimize V/F curve automatically based on the load to realize power save running.
Extend equipment life and reduce maintenance.

Note: The VFD does not contain a braking resistor. If you want to adding an external braking resistor, please confirm with us before placing your order.

(Braking resistor is only necessary if you intend to use the VFD for the machine tool and you want to stop it quickly at the same time.

In other cases, there is no need to use braking resistor, VFD itself can realize FREE STOP.)

Package Includes:

1 × Variable Frequency Drive
1 × Operation Manual

Jerome S.

Reviewed in the United States on March 9, 2024

The VFD we purchased from ATO was exactly the right fit for the right price. It arrived in perfect condition and ahead of scheduled delivery. After installation and use my customer is ecstatic. His paint booth exhaust fan is working optimally and he has already earned back every penny spent. Again Thank You ATO and Amazon for your excellent product and services. V/R Jerome S. Woodlawn, TN USA

andrew reber

Reviewed in the United States on March 23, 2024

This machine said it would do to 60hz but max’s out at 50 won’t let you adjust to 60 goes from 1-50 and the instructions are a nightmare

marcel sabol

Reviewed in the United States on December 10, 2024

Works great, the only issue I had with this was the manual didnt exactly match what all my terminals were labelled. Figured out no neutral from wall power necessary and "e" is ground (earth). Once I was sure it was hooked up right we spun it up and it works great forward, reverse, controls rpm beautifully, and the face detaches from the module and with the ribbon cable mounts remotely.

Shopping Cart