Your cart is empty.
Your cart is empty.FOR BOTH PRESTA & SCHRADER BIKES
Kathleen
Reviewed in Canada on January 25, 2023
Works good on all my bikes except the road bike. Though it says it's good for 100psi the nozzle seems to start leaking around then. If your desired pressure is below that, should be good enough.
D. Roche
Reviewed in the United States on August 6, 2022
I am able to use this on my bicycle and motor vehicles, except my motorcycle. Beats switching back and forth between an air gauge, air chuck and manual bleeding of air from the tires. Seems well put together; solid, not flimsy. Guage is very easy to read. As others have noted, can be a little tricky to fit over a presta valve, but a good push and it locks tight over the valve, although it might take two or three attempts. Cannot maneuver the hose on the tire valve of motorcycle due to tight space of valve behind the wheel spokes, hence four stars foe "ease of use," however, perhaps a horizontal valve would solve that problem. Will install such valves at next tire change and see how it works. Overall, very pleased with the product. A good value IMHO.
Client d'
Reviewed in Canada on July 4, 2022
Tres bon
Frank in MN
Reviewed in the United States on October 14, 2022
I review only Excellent or Very Bad products. Unfortunately, this falls into the latter group ... IF using it for PRESTA valves (which I purchased it for), found on most all performance oriented, quality bicycles. As background, I have 56 years of bicycle maintenance experience with my own stable of bikes over the years. I have also attended professional training classes on all aspects of bike maintenance, and I have 10+ years of experience working in bike shops.Recognizing what a good tool is and knowing how to use them, this one fails even the 'good enough to get the job done' test.As others have commented, the Presta adapter ... consisting of a 10 inch length of rubber hose with a 1/4" NPT fitting on one end and a plastic Presta valve connector on the other ... is unworkable because it leaks constantly due to poor design. There is no 'user fix' to correct this, except to remove the plastic Presta valve connector and replace it with one that works. I own three good foot pumps, each with a plastic or metal+plastic Presta valve connector that work flawlessly and without leakage. I do NOT want to, and should not have to, cut off one of those and replace the poorly designed Presta valve connector on this AZUNO compressor-air powered gauge and inflator. So I am returning it.Though it worked well with the (included) Schraeder Valve connector and provided accurate PSI readings (I compared its reading with a couple of known-quality pressure testers), SAVE YOURSELF TIME AND TROUBLE and look elsewhere if you want a unit that will reliably inflate PRESTA VALVES and display an accurate pressure reading! This tool WILL NOT do that.
joseph c.
Reviewed in the United States on October 5, 2020
The head works OK, and it connected to my compressor fitting just fine. I used it to seat and inflate my tubeless tire conversion.It was leaking air at one of the nut though... The rubber gasket was misalligned when then nut was tightened from the factory, and it was not sealed air tight. It still worked to inflate my tires, but for sure pressure was lost through the leak.I had to loosen the nut and reseated the rubber gasket, and retightened in order to get the leak to stop... So I fixed it, but I took one star off for that. Even though it was fixable by me, I would expect a product to work correctly and at 100% when shipped to me. See attached picture for the nut I'm referring to. It's circled in the pic.Also, I'm not sure about the accuracy of the pressure reading, as it gave me several different readings when I compared it to a good old fashion car tire PSI reader.I would give 3.5 stars if I could.
Tiger_Y
Reviewed in the United States on January 28, 2019
This thing is amazing. Dual haed Presta Schrader nozzle is so much easier and more efficient than my bike pump, and the whole set semms high quality. Gauge is accurate enough, accessories are thoughtful.The locking feature on the nozzle is the best I ever used, great quality. You put the nozzle into your tire's valve, and then you flip a switch and it locks in place perfectly. On my old bike pump, you'd hear a hissing noise so air would escape and you'd have to fiddle with it before it stopped, and even then it'd still hiss a bit. No air leaks at all from this nozzle. The pipe lenght is very generous, 40'' not including the nozzle.I like the digital PSI gauge, large number and bright LCD, much better than my old dial gauge. The chuck simply clips straight on to the valve stem with almost no loss of air, and the pressure reads out on the gauge automatically. Then just press the lever on the gauge until the pressure is correct. If you go slightly over, use the pressure release button on the side to let some air out. When the pressure is right, release the valve stem and remove it quickly.Great set. Worth the money.
Kelly
Reviewed in the United States on January 23, 2019
The media could not be loaded.
Recommended Products
$52.45
$ 24 .99 $24.99