Shopping Cart

Your cart is empty.

Your cart is empty.

BRCOVAN Anti-Theft Phone Mount Holder with Vibration Dampener [1s Lock & Release] [Camera Friendly] with Aluminum Medium Arm & Square Base, for Car Boat Truck Motorcycle ATV UTV, Fit 5.4-7.2'' Phones

Free shipping on orders over $29.99

$39.99

$ 20 .99 $20.99

In Stock

About this item

  • Sturdy & Secure: The main body of this phone cradle is made of high-strength material, adopt solid aluminum medium arm and square mounting base. The all-around rubber pads on phone clip protect your phone from scratching and slipping. Equipped with vibration dampener to absorb vibrations generated while driving
  • Anti-theft Design: After installing and adjusting the angle of the mobile phone holder, tighten the knob of the double socket arm, insert the small screw included in the package into the knob and tighten the screw, and finally insert the screw cover. At this time, you can only loosen the knob to adjust the angle, but cannot disassemble the cell phone mount. This design ensures that your phone holder cannot be easily removed with bare hands
  • Note: The anti-theft design is to ensure that the mobile phone mount is not easily removed, not an anti-theft design for smartphone
  • Easy To Install: The square mounting base consists of a B size 1'' TPU ball connected to a 2" x 1.69" square plate. The square plate features industry-standard AMPS hole pattern with four pre-drilled holes at each corner. Suitable for mounting on the dashboard of a car boat truck UTV golf cart. If your motorcycle ATV snowmobile e-bike scooter has a place to secure this round base, you can also try mounting this phone holder to those vehicles
  • One-Hand Operation: Adjust the phone clip to the best gripping position for your phone size with the adjustable width knob, then lock the safety switch to hold your phone securely. 1-second lock and release design makes it easy to take out and put in your phone while riding
  • Does Not Block Camera: The cell phone mount adopts half enclosure design, doesn't block the phone's camera, support riding video recording. Will not block the phone screen and will not affect the use of touch screen and face recognition functions. 360 degree rotation design, can be easy to adjust the smartphone to horizontal or vertical screen
  • Adjustable Design, Wide Compatibility: The body size of the cellphone holder can be adjusted according to the size of your phone. This Phone Mount Holds Phones (Case Included) Dimensions: Width 2.60'' (66mm) - 3.46'' (88mm), Thickness 0.59'' (15mm ) Max. Compatible with cellphone screen diagonal size: 5.4'' - 7.2''. By adjusting the telescopic rod at the bottom of the mobile phone holder, you can match mobile phones of different lengths.
  • Steps to Note When Installing: The correct steps to install the ball of the phone clip and the ball of the round base to the double socket arm: (1) Loosen the double socket arm knob, (2) Insert the two balls into the double socket arm, (3) Tighten the double socket arm knob, (4) Insert the knob screw and tighten, (5) Insert the screw cover.



Product Description

Phone mount holder for car boat truck and more
One hand operation design
Phone mount holder with vibration dampener
Anti theft design phone mount holder
Adjustable Width and Length Design

The exquisite and compact body design gives you a wider field of vision when riding & driving

Adjustable design, can accommodate more sizes of mobile phones

Adjustable design, can accommodate more sizes of mobile phones
360 Degree Free Rotation Design

Ray Sulich Jr.
Reviewed in the United States on March 31, 2025
Nicely built phone mount. This thing is durable and can be assembled and installed in just a few minutes. Simply theft protection comes with the ability to operate the phone or remove it from the motorcycle mostly unimpared. One less thing to worry about when riding on bumpy roads or in traffic. This is a really nice mount that even looks nice.
KatanaAvion
Reviewed in the United States on March 29, 2025
This is working great to keep our phones in place on the motorcycle. Now we can use our gps even when taking a ride, without needing to stop to look at directions. It stays in place and keeps the phone stable. It fit well on the handlebars w=and look nice.
Garrett H
Reviewed in the United States on March 2, 2025
The item itself is good, and solid, but the stated width of the holder is overstated, and I fount that my phone, while on the maximum of the stated range, was just slightly too big for the holder clamps. The bottom was no issue. I was able to force my phone into the holder, but locking the clamp is not possible. That said, if the phone is in the holder as tight as I had it in there, the lock is not needed, but also proves difficulty to insert and remove the phone. I recommend this item for anyone who has a phone with a width of 1/4" less than the stated width max.
Robert Novak
Reviewed in the United States on March 14, 2025
I had to come back to the product page to figure out why there was a screw-on ball mount in this kit, but it now makes sense. This is a largely manually-adjusted phone holder that offers multiple mount options. There's a double-sided ball mount holder that could also probably be used with a handlebar on a bike. The sides of the phone holder adjust with a manual screw, and I ended up sliding my iPhone 15 Pro Max in from the top to have the holder hold it. You can screw the ball mount to any suitable surface to mount the holder, or even use contact adhesive or the like if your surface doesn't lend itself well to fasteners.The $40 price seems reasonable for a holder with the vibration dampening feature. I'm not sure how much use I'll get out of it, but we'll see.
Glin M
Reviewed in the United States on March 14, 2025
Built like a tank. I wish the phones themselves were this overbuilt. Maybe we could get a decade out of them. This locks the phone in tight, and after the initial set-up, still allows for quick and easy removal. You just have to be very deliberate locking it in and taking it out. It mounts securely. You can spend a lot more on a brand name and get a lot less value. The downside of its sturdiness is that it is heavy, so make sure that it is mounted securely. Foam tape will not hold this beast in place!
Tony
Reviewed in the United States on February 14, 2025
I got this mount for my boat and it appears that it’ll work just as expected. The mount feels very well made and solid so it should have no problem holding up in the elements and hitting the waves. There’s no instructions but for the most part it’s self explanatory. I have a iPhone 14 Plus and have no issues fitting it securely in the mount. The sides clips are adjustable and holds the phone securely, I don’t see anyway that the phone could fall out of the holder. The base of the mount is flat with 4 screw holes which is what I wanted, I did wish it came with two sided tape I ended up getting some along with screwing it onto the dash of my boat. It also didn’t come with any mounting screws but I had some stainless screws that did the job. This type of mounting may not be for everyone but it’s exactly what I needed. Since it’s winter I haven’t gotten the boat on the water to test it out but I did install it and have no doubt that it’ll keep the phone in place. I also like that once you have it adjusted there’s little allen screws that gets tightened and covered so it’s locked in place.Overall a very well built phone mount that keeps the phone in place securely.
Greg
Reviewed in the United States on April 14, 2025
Great quality mount, I use that on my jet ski constantly
Online Consumer
Reviewed in the United States on April 1, 2025
I mounted this in my AWD overland converted Astro van dash because every other phone mount I have tried is very shaky and sometimes the phone pops out. This is much better than any other phone mount I have tried, and I like that it mounts directly to the dash wish screws (and double-side sticky for extra security). This is solid and holds the phone better than any other I have used. Very happy with the results
Recommended Products