Your cart is empty.
Your cart is empty.Product Description
Package included:
- 1Pcs 23HS2430 Nema23 Stepper Motor 57x57x112mm,3A, 425oz-in ,4 wires ( single shaft)
Advantages
- Our motor is made of solid and durable metal. The perfect combination of rubber and rotor makes the internal structure more stable, and also reduces the vibration and noise when the engine runs.
- The motor runs more quietly, with a high torque of 425oz in. The coil uses pure copper enamelled wire to ensure that long-term operation will not lead to excessive engine temperature.
- The rotor surface is coated with high-quality epoxy resin adhesive to isolate the adsorbed burrs on the rotor surface, more stable magnetic field and longer service life of motor.
Electrical Specification:
* Model Number: 23HS2430
* Motor Type: Hybrid Stepper
* Step Angle: 1.8 degree
* Holding Torque: 2.8Nm (425oz.in)
* Phase Resistance: 1.6ohms
* Rated Current/phase: 3A
* Inductance: 6.8mH+/-20%(1KHz)
* Frame Size: 57 x 57 x 112 mm
* Body Length: 112mm
* Number of Leads: 4
* Weight: 1.8kg
* shaft is 8mm diameter
This is the high torque model for Nema 23 stepper motor, it with 1.8 deg.
rated current is 3A, allowing for a holding torque of 280Ncm(425oz.in).
- Step angle accuracy:+ - 5%(full step,not load)
- Resistance accuracy: + - 10%
- Inductance accuracy:+ - 20%
- Temperature rise: 80deg Max(rated current,2 phase on)
- Ambient temperature: 20deg-50deg
- Stepper motor's red wire connect to driver's A+ port
- Stepper motor's green wire connect to driver's A- port
- Stepper motor's yellow wire connect to driver's B+ port
- Stepper motor's blue wire connect to driver's B- port
Shannon Walton
Reviewed in the United States on January 12, 2025
Motor worked exactly for what I needed it for. I would recommend and also buy another one if I needed it again.
gmart
Reviewed in the United States on September 27, 2024
works for project
Fred McFeeters
Reviewed in the United States on November 5, 2024
Not using in typical fashion. Not using belts just directly driving a 10mm shaft that is bolted rack that turns the wheel. Like a rack and pinion.I had tried a nema17 1.4 amp stepper that couldn't turn the wheel sitting on hardwood.This motor is able to steer and hold that position in very rough grass, asphalt, ect. It can do that in motion and from standing still
Todd
Reviewed in the United States on January 5, 2024
When i opened it i found the motor sitting on the wires. Looks like it was packaged with the motor sitting on the wires. You can see bare wire exposed. Im gonna try to fix it with heat shrink tubing and pray the wires are still fine and not broke. Unknown if the motor works at this point. Just irritated now that the wires weren't coiled up to the side with a twist tie.Update: The company saw my post and reached out to me within a few days, giving me the option of a full refund or a replacement. I asked for a refund, they not only did that but sent me another motor to replace the damaged one. On arrival the new motor wires were properly coiled at the end of the motor. I did not expect the new motor but I upped my rating from 2 stars to 5 due to the customer service recieved. Good customer service is hard to come by these days! Thank you.
Mitchell Wilson
Reviewed in the United States on January 28, 2024
To match three others
Jonathan Decker
Reviewed in the United States on January 17, 2024
Didn't fit, may work fine but wrong size listed
Nikolai
Reviewed in the United States on September 23, 2023
Excellent product
John Marangola
Reviewed in the United States on July 5, 2020
High quality stepper for the price. Performs well under high load.
Recommended Products
$35.99
$ 16 .99 $16.99
$499.90
$ 99 .00 $99.00