Your cart is empty.
Your cart is empty.This hazard warning switch is designed to match the appearance and function of the original switch on specified applications. Made of quality materials, it is engineered for reliable performance and durability. This part is compatible with the following vehicles. Before purchasing, enter your vehicle trim in the garage tool to confirm fitment. [Chevrolet Corvette: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004]
Tommy B.
Reviewed in the United States on August 30, 2023
I bought 2 in 1 months! 1 came defective and 1 stopped working in 3 weeks. Do yourself a favor and do not but this. Try and open your oem hazard flasher, clean the contacts, and add additional dielectric grease, I promise it will last longer and be more reliable!!!
Mr. J
Reviewed in the United States on July 1, 2021
Product worked great in my 02 vette. Be prepared for a fight to get the old one out though. Roughly a 4 hour install.
Garrett
Reviewed in the United States on September 14, 2020
It works great. Only negative is the turn signal click is much softer sounding than the original
Customer
Reviewed in the United States on August 3, 2020
This is a common part that fails in the C5 corvette. The turn signals for the car run through this switch, so when the part fails, your turn signals no longer work. This problem happened to me, so I purchased this item to fix the problem. This part is very difficult and stubborn to install. Still I was able to get the part installed and it fixed my problem.....for about 6 months.....until the new part failed, once again leaving me with no turn signals.I tried to take the manufacturer up on the warranty for this item. Dorman then sent me to Amazon customer service, who demanded that I send them the defective part. In most cases that is a reasonable request, but not in the case of an item installed in the dash that will take 3 hours to remove (and you have to physically break the item to remove it anyway). So basically their "warranty" on this item is a crap shoot.Advice to others, don't buy this part; instead purchase the "hyperflash" unit that bypasses this switch. It is a little more expensive but will only take 30 minutes to install and it doesn't have a history of repeated failures.
Carl melicz
Reviewed in the United States on July 27, 2020
My directional stopped working I was told it was the switch what is installed it done
Rodolfo Lara
Reviewed in Mexico on October 7, 2020
Buen producto. Funciona sin problemas.
William Wayne Bell
Reviewed in the United States on April 13, 2020
The reason for the 1 star on Easy to Install is because of all of what has to be removed from the inside of your car and then it is still difficult to get to. YouTube video's make it look easy but don't be fooled. It is not. The part is a perfect fit and cleared my problem up with my signals not working all of the time. Don't pay a mechanic to do this unless you can afford an extra $100 labor.
Scoobi_FreeBSD
Reviewed in the United States on December 5, 2018
I purchased this hazard switch for my 2004 Chevrolet Corvette whose turn signal refused to blink unless I toggled the hazard switch multiple times. This switch controls all blinking light functions, including the turn signal. I procrastinated installing it until ~2017; the install is very difficult, requiring removal of the dash (there are instructions to replace the switch without removing the dash floating around on the Internet). Once installed, my turn signal worked again, but the "blinker" noise is a lot quieter than the stock unit. Also this winter (2018) I noticed that when the vehicle is cold ([UPDATE 2019/02/14] The hazard switch finally locked up this morning (~30 deg. F). I had been pressing the hazard switch to blink my hazard lights (which still worked in cold weather even though the turn signal sticks on) for a while before using my turn signal. This seemed to get the turn signal blinking faster. This morning I pressed the hazard switch and it would not disengage no matter how many times or how hard I pressed the button. I pulled over, pried the button face off and fiddled with the switch - nothing. Finally wound up pressing so hard that I pressed the switch into the dash, still blinking the hazard lights. Turned the car around in the subdivision and headed home to get some needlenose pliers which disengaged the switch (I think... maybe it coincidentally disengaged on its own). I now have no working hazard switch, a turn signal blinker which sticks in cold weather, and few options to replace the switch without resorting to this model. Docking a star.
suptlic
Reviewed in the United States on September 7, 2011
This product fit my 2000 Corvette perfectly, same functionality as OEM, but at over half of the price.Great replacement switch.
Recommended Products
