Your cart is empty.
Your cart is empty.
This Gotoh Tune-o-matic Bridge with Standard Posts is a popular modern version of the Tune-o-matic for solidbody guitar. Saddles are pre-notched, with individual saddle intonation screws retained by mini hex nuts.
Knurled height adjustment thumbwheels and threaded mounting posts are included.
Specs:
- String spread: 2-1/16" (51.99mm)
- Saddle radius: 12" (304.80mm)
- Stud spacing: 2-29/32" (73.99mm)
- Stud threads: M4 x .7
About bridge & tailpiece measurements:
- String spread is the distance between the centers of the outer strings on a bridge or tailpiece.
- Saddle radius determines the arc formed by all the individual saddle heights, and is similar to the measurement of a fretboard.
- Stud/post spacing is the distance between the centers of the mounting posts of a bridge or 'stop' tailpiece.
_User
Reviewed in the United States on September 5, 2024
I needed to replace the original bridge on my 1980 Nashville-made Les Paul Pro-Deluxe. I've used other parts by Gotoh in the past with great results including locking vintage tuners and a new 2-point tremolo bridge for a '97 Fender Stratocaster. Gotoh products have always performed well for me, and have excellent fit and finish.This was a perfect fit, drop in replacement for the original. After dropping in place I just needed to set the action and intonation. Easy process.Couldn't be happier.
Wknm
Reviewed in the United States on November 4, 2024
Perfect bridge, high quality, fits well on my Yamaha RSP20, keeps intonation well, the saddles are tight, better than the stock one that came with the guitar that affected tuning due to not staying in place. Improved sustain. Highly recommended
REM GUITARS
Reviewed in the United States on February 19, 2023
Fitment was good on my project guitar, intonates very well…
Uncle G
Reviewed in the United States on June 18, 2022
I got this for my Epiphone Casino that had a rattle sound because of the wire screw retainer also couldn’t get the intonation for one stringI wanted to swap out the saddles for my GraphTech saddles but the screws are permanently mounted so that didn’t workTwo out of three is not bad
Mark
Reviewed in the United States on March 13, 2022
Used for my 70's Les Paul Deluxe, works perfectly, took a lot of movement to set intonation but had enough not to reverse saddles
Spitfire
Reviewed in the United States on June 3, 2021
The media could not be loaded.
brian Boeckman
Reviewed in the United States on November 11, 2021
After messing with the truss rod on my Gretsch Jet, I finally realized the buzzing was coming from the cheap tune o matic bridge. I went in search of aftermarket bridges that went for 2-3x the price of this Gotoh bridge. Since there's no retention wire with this design, the buzzing stopped immediately after swapping it in. Direct drop in, no drilling or anything, I didn't even take the strings all the way off. After adjusting the action a little (the Gotoh is slightly taller than the one that came with the guitar) I intonated each string in about 10 minutes. She plays like a dream now, much improved sustain and tuning stability. I highly recommend this if you've got a buzzy/rattling TOM bridge.
BNA
Reviewed in the United States on October 29, 2019
High quality drop in replacement is a near perfect fit for Revstar RS320. This Gotoh bridge has a 12" radius which is the closest match I could find to the revstar's 13-3/4" fingerboard radius. Set string height at the two outside strings. Middle strings are a little bit higher but we're talking thousandths of an inch. Stock bridge was buzzing and didn't have enough adjustment to get intonation set right. This new Gotoh bridge fixed the buzzing and intonation issues making this an excellent upgrade.
Recommended Products
