Your cart is empty.
Your cart is empty.Product Description
Works with Tecumseh 8hp 9hp 10hp engine
Bore diameter on the front: 23.8mm/0.94''
Center to center mounting hole distance on the front: 45.16mm/1.78''
Replaces part number 640349 640052 640054 640058 640058A
Replaces Tecumseh HMSK80 HMSK90 HMSK100-159295W HMSK100-159297W HMSK100-159302W LH318SA LH358SA Snow Blower
Bore diameter on the back: 25.95mm/1.02''
Center to center mounting hole distance on the back: 35.23mm/1.39''
Replaces MFG # 5313 5002 5036
Replaces OREGON 50-659
Replaces STENS 520-926
Replaces John Deere TRX24 TRX26 TRX27 TRX32 TRS22 TRS24 TRS26 TRS27 TRS32 Snow Blower Thrower
jim
Reviewed in the United States on March 12, 2025
prefect fit
Stéphane Labonté
Reviewed in Canada on February 6, 2025
Qualité rapport prix, je le recommande depuis ce temps. Ma souffleuse fonctionne mieux.
Trapboy
Reviewed in the United States on February 2, 2025
Fit right up.connected gas line, pulled starter rope 3 times runs good.
Holly Garner
Reviewed in the United States on January 29, 2025
Exactly as advertised.
R. Larson
Reviewed in the United States on January 2, 2025
I put this carb on my 15+ year old snow blower, and it works as good as, if not better than new. I have no idea what an OEM carb at $80 - $100 can do that this one can't.
johnny u
Reviewed in the United States on July 1, 2024
Installed in probably 15 minutes. Primed the carb and fired up on the 2nd pull. Smooth idle and throttled up an down perfect.
Jacques Bedard
Reviewed in Canada on June 14, 2024
Fonctionne bien
Tim
Reviewed in the United States on December 17, 2024
Worked great right out of the box and fit to all the rods and switches perfect
lonnie moses
Reviewed in the United States on November 27, 2024
Put the carburetor on. New fuel lines. On a snowblower that is over 20 years old. Started on the second pull. It ran like brand new. Let it snow
ray duf
Reviewed in Canada on November 19, 2024
démarrage du premier coup ,bon produit fonctionne très bien
big foot
Reviewed in the United States on October 6, 2024
It is hard to believe that a quality product like was so cheap. After it was installed, the fuel valve was opened and checked for leaks. All was good. I hit the primer 3 times, choked it, and pulled the recoil twice. It started and idled and ran fine. The old original carb never ran this good. The only problem I had was the primer suction line was too short by about an inch. A replacement to that solved the problem. I would highly recommend this product.
john ioannou
Reviewed in Canada on January 6, 2023
Very easy to install and my machine starts like new on the first pull
Juliette Desrosiers
Reviewed in Canada on December 20, 2022
This is exactly what I wanted and the shipping was pretty quick even with the snowstorm. I was surprised
Recommended Products