Your cart is empty.
Your cart is empty.The HandALL Beavertail Grip Sleeve adds comfort and improved grip to your handguns frame. Textured with Hogue’s Cobblestone pattern for a secure grip and finger grooves for natural positioning. This product is made from a durable thermoplastic elastomer that is built to last.
TW
Reviewed in the United States on March 9, 2025
Good form, fit and function. Durable and comfortable.
Eric OLT
Reviewed in the United States on March 5, 2025
I ordered this based off another comment that said it would fit my Canik mete sft. It works*...*Make sure you have the thinner backstrap on, and remove the magwell extender(if on). Follow the instructions and create the plastic shoehorns from the packaging plastic (make sure you don't have sharp corners). Once you get it started, push up on one side, then the other...half inch by half inch. After you have it all the way up, pull out the shoehorns(needle nose pliars will help). Then roll up the excess on the bottom and add back on the magwell extender. *If you don't use the magwell extender, you will have a little excess rubber...cut/trim at your own risk. With it all back together it feels GREAT and fits 99%. We'll worth the cheap price and it's very snug.
Top Cat
Reviewed in the United States on June 13, 2024
The aggressive grip was uncomfortable. This grip makes it a pleasure to shoot. A little difficult to put on but if you let it sit in near boiling water for 3 or 4 minutes and then use windex to lubricant the grip it is much easier to put on. It is well worth the extra effort because you will have a new gun
Oakman
Reviewed in the United States on November 11, 2024
The grip fits alot more pistol grips than just CZ. It fits a Canik pt9 sfx and a Ruger 57 , just to name a few. Manly any pistol with a long full size grip, it's very versatile and has a very nice firm feel.
BlackCat
Reviewed in the United States on October 10, 2024
I like to call Hogue Grips Hoagie Grips instead, to get a better grip on your hoagie.......I love this grip, but a better way to put this on is to do what the instructions say but avoid the part about cutting two little shoe horn pieces from the thin plastic. Instead use the handle end of a spoon that isn't too large and gently open leave an opening to flood with more of the window cleaner suggested for lubrication. It's like putting on a bicycle grip. A tiny bit at a time. Once it's on, IT IS SO MUCH NICER TO HOLD. Finally feels GOOD in the hand, not icky, and prickly.
Merle & Elaine Fuller
Reviewed in Canada on January 22, 2024
This product was an exact fit and I’m very pleased.
Marshal Shlafer
Reviewed in the United States on July 24, 2023
Many people use these fine Hogue grips to make gripping a gun that gets slippery from sweaty hands more secure. I use them for grips that to me are excessively textured and get uncomfortable with long sessions at the range. That excessive texture, of course, makes an already quite difficult task of pulling the rubber up over the grip even harder (thus 2 stars for easy to install; it's anything but easy).But once the grip cover is in place.... it's GREAT! Perfect fit every time. I love these grip covers!FWiW, I put these (and other) Hogue grips in boiling water, stretch them as best I can, and keep repeating the process. Spraying lots of Windex (the blue variety) over the actual grip and inside these covers helps a lot, as does pulling the rubber back periodically while it's partially on the gun and liberally squirting more Windex in.Hogue advises to make two "V-shaped" pieces of plastic from the packaging (see instructions on the package) and putting that inside the cover to help slip/tug/pull the cover on. I found what is for me a better solution: instead of the plastic use the handles of two small metal spoons or forks as inserts, one on each side of the gun's grip. As long as the handles are smooth (no flowery or fruity decorations on the ends) and relatively thin (and a bit curved), once they're sprayed with Windex they're much slipperier and make it much easier (but still not easy) to pull the grip covers up where they need to be. With this method I didn't need to use a hair dryer or heat gun to help the installation. Just a good bit of muscle... and patience.
Jake S
Reviewed in the United States on June 17, 2023
I love the Hogue rubber grips, they transform the feel into a extremely premium feeling, yet tacky and comfortable grip.I use these grips on anything I own that they make them for, however, with my recently purchased Canik METE SFx Pro I was sad to see that they didn’t have a model yet that fits it.I saw this fit the CZ with a very similar looking grip handle, so I decided to give it a shot.It fits extremely well on the Canik! It is a few mm long, but as long as you put the magwell that came with the Canik back in after you install the grip, it fits perfectly without sticking out past the magwell. It conforms around the magwell and looks like it was made to be that way.I’m extremely happy it fits, made the Canik feel even better!!For those who have trouble installing these grips, make sure to spray the inside of the grip and the grip handle with some windex and you should have no trouble. No heating needed.Also, for Canik Mete owners, make sure to put the smallest back strap on before installing.
Jody Mathis
Reviewed in the United States on May 24, 2023
I love this grip. I soaked mine hot water for about 45 seconds, then dried it off and put it on. It's not easy to go on. You have to realize the CZ P10 already has a pretty aggressive grip to begin with. So, it's going to be a struggle to get in on. It takes a little time and a lot of wiggling, but when it's on, it's on for good. I've seen other reviews of it being ripped or torn. I can tell you firsthand, that probably happened because some tried to force it on with metal tool. Perfect grip.
Paul M
Reviewed in Canada on April 6, 2021
Love it great grip hard to get on the gun but super comfortable.
Recommended Products
$25.35
$ 12 .99 $12.99
$23.80
$ 9 .99 $9.99
$14.35
$ 7 .99 $7.99