Your cart is empty.
Your cart is empty.This pipe notcher is designed to notch tubing from 3/4 In to 3 In tubing. You can build anything from a Go Cart to an exhaust on your hot-rod. Use any 1/2 In hand drill to power this professional Tubing Notcher. This notcher accepts all standard hole saws and is adjustable up to 50 degrees with the loosening of the bolt. Adjust to your desired angle with one hand and lock down the bearing block with the other. This Professional Tubing Notcher is designed with the professional fabricator in mind to create precision “fishmouth” notches within a wide range of angles from 90° to 150° in tubing up to 3" diameter using a hand drill with a 1/2" or larger chuck. Hole saw not included.
Donovan
Reviewed in the United States on March 4, 2025
This has been great so far. I upgraded it with some other parts and its even more capable now. Spindle and block feel good and run pretty true. Minor wobble due to holesaw and drill hanging off of it. Otherwise working well for me.
Gary Noble
Reviewed in the United States on March 16, 2025
This is a solid pipe notcher. I've been using an older eastwood notcher until I purchased this one. It's built to last.
R. Milne
Reviewed in the United States on June 27, 2024
I have this unit together - I just have to find a place to put it. It's a very heavy, sturdy jig. Instructions are a bit lax, and I think I'm missing a part (a nut for actually holding the saw blade to the arbor). From the instructions, this is supposed to be mounted sideways under a drill press, with the arbor in the drill chuck. But if that's done, your drill needs to be in the middle of your shop depending where you need to make the birds mouth on your pipe (length dependent). Not a huge deal, just awkward. I would love to see a mounting plate for this where it can be mounted to a work bench or a tool stand and the saw being operated by a hand held drill - which is my plan at the moment. Some small niggling little details, but otherwise a nice unit.
Paul
Reviewed in the United States on April 27, 2022
The media could not be loaded.
john c.
Reviewed in the United States on March 7, 2020
Overall seems to be a pretty sturdy pipe notch tool i really like the reach around clamp thats an optional expensive upgrade for other brand of notchers and this one includes it! Also like how its really well centered out of the box. Needle bearings in the shaft body seem durable especially if you keep it clean and lubed. Things that aren't deal breakers would be the slight wobble of the hole saw arbor and the dovetail slide which was slightly damaged in shipment and made the reach around clamp not open up all the way. Used a file to settle that issue quick. Overall a good buy and for the price its a bargain.
Jumbo Juggler
Reviewed in the United States on March 15, 2020
The media could not be loaded.
Douglas
Reviewed in the United States on October 22, 2020
If you are cutting perpendicular you only have 2" from the tube to the chuck. If you try to make a 45deg cut you only have 1.5" from the tube to the chuck with a 2" diameter blade. How are you suppose to make a cut on anything over 1.5" if your blade is less than 1.5" deep? The bering block needs to be positioned way further way from the material in order for this to work. Very disappointed. Well made though.And, did I mention that it was beefy? You need the reach around upgrade to be able to slide the bering block back. https://www.amazon.com/SWAG-Notch-Master-Reach-Around/dp/B00LBFPTAY/. Should have this additional part originally rather than the stubby un-usable part.
Jarred C.
Reviewed in the United States on May 13, 2019
For the money this id a very good tool. Very heavy duty. There is a very minimal slight amount of play in the shaft. The only way that could be improved is by replacing the bearings with bushings. I may elect to do this if i have a very precise job to do.
Recommended Products