Your cart is empty.
Your cart is empty.Product Description
Detailed Information
1.Round belt Welding machine is a device that maintains a constant temperature by heating to a certain temperature.
2.This device is easy to use and easy to operate, very stable effect is good, bonding belt forming effect fast, the belt will not break. Not hot, easy to use.
3.The use of bonding belts are: V-belt, pentagonal belt, PU round belt, PU tube, plastic strips and other products can be easily melted.
4.The temperature of the equipment is usually between 180 degrees and 200 degrees.
How to use the adapter:
1. fixed. The belt to be connected is fixed in the groove (usually V, O-groove) below the aluminum fixture (the clamp main refers to the gasket and nut). Remove the nuts on both sides of the nut and nuts (depending on the diameter of the belt, if the belt can be inserted directly into the groove, do not remove the nut and gasket), the belt into the groove, the gasket and Nuts re-fixed in the groove above the sides of the plywood in a parallel state, the spacing is about 2cm or so is appropriate (can be placed in the middle of the thermostat heater)
2.heating. Will be heated to the constant temperature heater (the best temperature of the belt connection at 160-180 ), the fixed belt heating (the premise of the heat belt can not be bubbles, otherwise affect the connection effect), and then docking, the fixture Manual clamp nut tightened to the belt docking firm;
3. re-processing. Belt docking to complete, to be completely cooled after the removal of the belt， scraping, leveling.
Tips:
PU round with a small diameter of the polyurethane belt, please put the round belt on the top of the tank there, so that the round belt 2 connector alignment, then the larger diameter of the round belt or red polyurethane ribbons please put the bottom the inside of the groove!
Features:
- Voltage:110V
- Including scissors, soldering iron, connectors
- The temperature of the equipment is usually between 200 and 250 degrees.
- Suitable for melting products such as triangular belt, pentagonal belt, PU circular belt, PU pipe
- Note: This is a wide voltage product that can be used under 110V.
Multi-angle scissors
1. The angle can be adjusted to facilitate the trimming of the belt
2. Simple operation, can trim various belts
High precision positioning pliers
1. Three sizes of belts can be fixed
2. Precise positioning, convenient for welding
3. The interface will not be misplaced
Electric soldering iron
1. The temperature can reach 400℃
2. Cover the surface with cloth to extend the service life and reduce wear
Jason L.
Reviewed in the United States on November 13, 2024
Great Kit!!! It works great and has everything you need at a great cost. I met with some overseas co-workers that brought their own all-in-oone unit. There was a convenience factor to the all-in-one, however they are more expensive and require a power supply to drag around. This product is like a big soldering iron with variable control. I recommend for anyone needed this type of device. I wish there was a case or padded pouch to keep it protected in my toolbox.
user
Reviewed in the United States on February 7, 2020
Didn’t work
slowhat
Reviewed in the United States on January 27, 2020
Welding round belt was a breeze with the included tools. Everything needed to evenly cut, hold in place, and heat/weld is here. Decent quality on each item. The clam is great and has multiple points to adjust to get a secure hold.Good product overall!
Recommended Products