Laura
Reviewed in Canada on August 13, 2024
Used this tubing in our water line instead of PEX as our line is very short and we're only running cold water. Doing a great job. Bit of a plasticy taste initially, but we ran a touch of bleach with lots of water through it to eliminate that.
Chadnic
Reviewed in the United States on July 6, 2024
I used this as a drain tube for an RV sink I put in and it worked perfect. It is a bit stiff to be honest but that is good once you get it bent to the shape you want.Pro-tip: To get it all shaped the way you want, use a heat gun to heat up the parts you want to bend. I actually made a slight S shape out of it and it worked perfect. I just heated up one section at a time bent it and held it and let it cool. It holds pretty well and over time it seems to be fine. I am sure you can't do anything intricate but you can make it work.I hope this helped!
Veraster
Reviewed in the United States on September 7, 2023
These are nearly 1/4th the price of the pc watercool tubes I was using and they're almost as good. Their kink resistance isn't as good but still sufficient. I highly recommend these.
kieran MacDonald
Reviewed in Canada on September 1, 2023
Vary strong and sturdy. Only thing is to use hot water to make it more flexible to bend it.
Mr. E. Manne
Reviewed in the United States on June 10, 2023
I bought this to cut into short lengths for protecting blades of wood hand-carving (whittling) knives and push chisels (and my fingers when reaching for them). This is tough stuff and fits perfectly on most of my carving tools, even the Flex-Cut palm chisels with curved, flat blades/tines. A couple of my carvng knives are on the wide side and slice into this hosing, but it doesn't give out. Great for this purpose.
MIKE
Reviewed in the United States on March 23, 2023
I BOUGHT THIS TO USE ON MY OIL DRAIN AND IT WORKS GREAT!
Dany Chandonnet
Reviewed in Canada on March 1, 2023
Good
Lyle
Reviewed in Canada on July 26, 2022
Should work fine!
Jerry
Reviewed in the United States on March 5, 2021
Definitely some thick hose, has the nylon in it which makes it even stronger. Only complaint here is that since it is so thick and strong you will have to unroll this and lay it in the sun to straighten it out before use. Otherwise works great
Akony
Reviewed in Canada on March 16, 2019
Excellent quality, for my application.
Capt. RL
Reviewed in the United States on August 5, 2018
It's good hose, it's braided/reinforced and medium wall schedule. Pretty decent for marine grade use in the bilge although a little thicker wall hose would be longer lasting. It'll definitely work either way and I would probably buy it again. No issues with anything, arrived quick and came rolled properly and notFolded up and stuffed into a tiny bag like some other sellers do.
Dylan
Reviewed in the United States on November 4, 2016
I use this hose for brewing. This hose is very durable and has cleaned easily. Since the hose is so tough, though, it's a pain in the ass to maneuver around my kitchen when transfering wort using my autosiphon because it doesn't bend much at all. On the brightside, it really doesn't ever kink. Basically, if you have a nice setup and don't need to move hose much, it is probably awesome, but if you need to move it around I'd recommend a thinner (in terms of tube material thickness, not diameter) hose.
donfranko
Reviewed in the United States on April 4, 2013
High quality hose. I like that it is reinforced with nylon webbing. I bought it to use as a syphon hose to syphon gas out of my truck to use in our emergency generator in an emergency. I was gonna buy four of the red gas cans, and keep them full all the time, but I realized my pickup truck has a 30 gallon gas tank, and in an emergency, I can syphon gas out of it to keep our electric generator running for quite some time. Much cheaper to keep the hose ready than buy those gas cans.