Your cart is empty.
Your cart is empty.Product Description
About the PTFE Tubing:
Elongation: 150~400%
Compressive Strength: 12Mpa/1740Psi
Max Operating Temperature: 240℃/464°F
Application: Widely used in guide rails, electrical insulation at various frequencies. as gas and liquid conveying tubing, lining tubing, heat exchanger tubing, use in machinery, electronics, valves, etc.
Features of PTFE Tubing
1. PTFE Tubing can transport gas or liquid under high temperature.
2. PTFE is a good electrical insulating material with heat resistance.
3. It has good aging resistance, non-stickiness, smooth conveying of gas and liquid.
4. PTFE is a friction-reducing and self-lubricating material with a low friction coefficient and good lubrication.
Gary B.
Reviewed in the United States on March 14, 2025
Good for my 3D printer and correct size ID and OD. Can see the filament inside to gauge placement. Much easier than shining a light through the tubing to see if filament is in that section.
kauaiguy
Reviewed in the United States on January 17, 2025
tubing was permanently creased and bent, filament gets stuck. bought two different ID sizes, both have sharp bends. useless.
Stan Aksentsev
Reviewed in Canada on July 25, 2024
This charred and dripped when a flame was applied. PTFE does not do this.
Heather M.
Reviewed in Canada on July 10, 2024
Would buy again
Thinh Nguyen
Reviewed in the United States on February 28, 2024
Lot of reviews saying this is not good for 3d printing.I purchased this since I needed longer PTFE tubes than I can buy from Bambu Lab.I use this for my all of my Bambu Lab printers, and it works just fine. No issues with stuck filament or breakage inside of the tube.I think translucent looks better and also helps in diagnosing issue caused by filament as you can see the filament better than white ptfe.It does come wound up pretty tight, but almost all ptfe tubes from amazon come wound up pretty tight. You'll want to straighten the tube before connecting it to the printer.
Truck Owner
Reviewed in the United States on November 29, 2024
My P1S printer PTFE tube wore out and I needed one the next day. Normally I would purchase this directly from Bambu Labs, but the deliver takes a week, so I thought I would give this a shot since I could get it the next day and there was a user that said it works good on BL printers.IT DOES NOT.... The P1S takes a 4mm OD tube with an ID of 2.5mm to help push the filament through, which is the size I bought. As you can see in the picture that is exactly how it came out of the package. It wasn't even in the box nor could it even fit in its own box. People mentioned kinks and I had one minor one which straightened out so that wasnt an issue. But after installing it, the filament would not withdraw with my AMS and kept getting stuck making me force pull it through. I ended up finding an old 2mm ID Capricorn PTFE tube and replaced it and my printer runs fine, so it was this PTFE tube.So where it may work on other 3D printers, especially bedslingers that are not using Direct drives, it does not work well with Bambu Labs P1S printers.
serg
Reviewed in the United States on January 19, 2024
Its STIFF. Not very flexible at all. If you need stiffer ptfe tubing this is for, but for application, it was too stiff.
yann
Reviewed in the United States on May 24, 2023
Love this stuff. great quality.
Robert Wright
Reviewed in the United States on November 28, 2023
FYI - I ordered six of these clear PTFE tubes. My 3D printer (Bambu Lab X1C) is very sensitive to the friction of the filament going through the PTFE tubes so I ordered these tubes .5 mm larger than what came with the printer. Four of them worked great but two of the six were unusable because the tube was severely "kinked" when it arrived. The kinked spot caused extra friction, thus they were not usable for my purposes.
f_p
Reviewed in the United States on March 13, 2022
I ordered 3 tubes. 2 were fine and happy with them. One came completely flat, totally unusable.
Recommended Products
$69.48
$ 28 .99 $28.99