Shopping Cart

Your cart is empty.

Your cart is empty.

Lynn Manufacturing Replacement Englander Fiber Board Baffle - 13 Series AC-13CFB-MH, 2401A

Free shipping on orders over $29.99

$49.90

$ 21 .99 $21.99

In Stock

1.Size:P/n: Ac-13cfb


  • 2401A Replaces: Englander, Summers Heat & Timber Ridge AC-13CFB-MH
  • Fits: Englander, Summers Heat & Timber Ridge wood stove models 13-NC(I,C,L,P,G), 50-SNC13(I,C,L,P,G) & 50-TNC13(I,C,L,P,G)-with slide damper control at CENTER of stove below the door. Also review Lynn item 2400A baffle that fits similar models with different damper control.
  • Size: Approximately 21'' x 10'' x 1/2''
  • Material: Ceramic fiber alternative board which, unlike ceramic fiber, is not classified as carcinogenic or hazardous. Board is hard, strong, withstands 2100F, and is rigidized grey for added durability. Material is comparable to Superwool Plus, SuperMag, and Insulfrax.
  • Made in the USA by Lynn Manufacturing, Inc.


Lynn 2401A Replacement Englander Fiber Board Baffle - 13 Series AC-13CFB-MH


Lisa Schiffleger
Reviewed in the United States on January 9, 2025
I have my wood stove cleaned 1-2 times a year and have to remove the baffles from on top. These are the exact product originally used and much cheaper. I keep a couple on hand for when the old baffles start falling apart.
Jacqueline A Cross
Reviewed in the United States on January 20, 2025
The price was great and it was very easy to replace, looks just like the manufacturer original and the quality appears to be just as good as the original version.
Jeephappy
Reviewed in the United States on January 18, 2025
Not sure if these last or not, but thought I would mention I had trouble getting the 2nd one in the stove. The way it worked for me is install first one in the center, push it as far back as you can even lifting it up in the back to get it farther back. Then install the 2nd board on top of the first. Then spread them out once both are in the stove. Took me a few minutes to figure this out. At least on my stove that was the only way it was going to fit.
No issues with fitment and install
Reviewed in Canada on January 1, 2025
No issues at all
Brandon
Reviewed in the United States on May 8, 2024
Well I picked up a englander nc13 wood stove that the owner had replaced the board with an unknown brand. And after about a month that new board cracked and the stove just wouldn’t maintain or burn. I had lots of soot building up. I ordered this expecting I’d probably be doing the same. Well to my surprise this board was thinner then the previous owners replacement and upon installing was about an 1/8” from not fitting but it did, like a glove. And after logging the first fire I could already tell the difference. The secondary burn was properly working. And... to my surprise I got a whole winter of use and it still looks great, and not to mention since the stove is burning like it should and chimney soot was minimal... and I burn only pine in this stove as it’s in the shop and pine tends to create tons of soot. Might order another as a backup. Came packaged very well.
Cindy Trotter
Reviewed in the United States on November 27, 2024
I order this about a year ago and it was a perfect piece that fit like a glove. Due to a woodpecker that made its way down my chimney and pecked the board into pieces, I had to reorder another. The first one was white, flat and otherwise perfect. This new one is a weird gray board with discolored patches like a colored shirt that got bleach spilled onto it. Also the new board while it fits perfectly size wise… it has a massive curve/warp to it. So far (a months use) it’s holding up and stoves working as it should. Time will tell if this board has issues due to discoloration and warp.
stan
Reviewed in the United States on November 21, 2024
Fit just fine …. Wish it was better looking like original was … it’s a concrete gray color .. it does tank on a “ patina” around flame area ?!.
Fred Cumby
Reviewed in Canada on February 10, 2023
Arrived as stated in the add. Very well packaged and arrived before it said it would. I ordered a set for my neighbour as well. Very good supplier and product
S
Reviewed in the United States on February 13, 2022
This board is a great value replacement board for Englander/summer heat stoves.This board is way more sturdy than OEM board, and after a first full 24 Hourburn, appears just as efficient if not better.One thing to keep in mind when using in older stoves as fore mentioned, steel heating and cooling over time stretches the metal. So this board in my stove needs to be a 1/4" longer in length to fit the pre made board shelf on both sides ( you can make it sit on L/R not both) I will contact Lynn to see if I can have one made with longer dimensions.
rg
Reviewed in Canada on December 10, 2022
Fit perfectly arrived on time and it works
ShadowAce
Reviewed in Canada on November 23, 2022
Received this very quickly so 5 Stars for the supplier on delivery. I cannot give a review yet on the actual performance until next year after I have had it in my wood stove for the winter. For the past 6 years I have ordered a new fibreboard every year from Englander as when I remove the fibreboard to clean stove and pipes, after a year of use, it is like paper and I usually end up putting my thumb through it no matter how careful I am. The Lynn fibreboard feels like a better quality so time will tell.
Brian
Reviewed in Canada on March 1, 2021
The last time I ordered this item it came with two pieces, and I just received one ? I need two of them for my wood stove baffles.
Eric
Reviewed in the United States on February 12, 2020
At nearly $50 per board (the stove requires 2 boards), this is a very expensive item. However, it is surprisingly the best price I've found online as a replacement for the Englander 30/50 series AC-30CFB baffle board. It feels and weighs like a small unenclosed piece of sheet rock, and it's about as durable, too. I've had to order 3 replacements this winter alone. If you over fill your stove with wood or tap the baffle board a few time while loading wood into the wood stove, there's a chance you'll break the baffle board and have to buy another. It seems to get more brittle overtime, most likely due to repeated heating and cooling.I'm grateful for this product listing on Amazon because the price seems to be better than the few alternatives I've found online, but I honestly can't help thinking someone is getting very wealthy off these seamingly simple little things. I doubt they even cost $5 each to manufacture.
Recommended Products

$59.99

$ 30 .99 $30.99

4.4
Select Option

$24.82

$ 12 .99 $12.99

4.8
Select Option

$19.55

$ 8 .99 $8.99

4.7
Select Option