Your cart is empty.
Your cart is empty.The Lord of the Rings™ has arrived to MGA's Miniverse™ ! All new DIY Make It Mini™ The Lord of the Rings™ themed minis to make, set, display, and collect! Each ball comes with realistic mini items and accessories to mold your own mini replicas of your favorite items from The Lord of the Rings™ film series! From the Elven Dagger™, to Narsil™, to Sting™! Each package is a SURPRISE so you won't know which mini replica you have until you unbox it! Compare the contents of your package with the included collector's guide, to see which mini you have. Follow the instruction card on the back of the collector's guide to mold your mini. Once you've finished creating your mini replica, set your mini for 60 minutes under the sun or a 365nm UV Light until the resin has hardened. Once it's set, you've got a Make It Mini™ The Lord of the Rings™ collectible ready for display! DISPLAY IT! The ball that your mini comes in turns into a stand for you to display your minis on! Collect all Make It Mini™ The Lord of the Rings™ Collectibles! Visit the MGA's Miniverse™ Store to shop and learn more about all the MAKE IT creations you can collect! If it’s not MGA's Miniverse™, then it’s not MGA's Miniverse™! DISCLAIMER: ALL Ingredients are NOT edible and do include resin play. Not suitable for kids under 8 years of age. Adult Supervision required.
Sandra
Reviewed in Spain on January 8, 2025
Al principio no sabíamos muy bien cómo iba pero después nos quedó genial.
Kats
Reviewed in Germany on January 4, 2025
Ich habe aufgrund einiger Rezensionen hier gezögert, die HdR-Kugeln auszuprobieren. Zumal andere miniverse-Sachen bei mir mal mehr und mal weniger gut funktionierten.Ich habe dann doch mal 2 der Kugeln auf gut Glück bestellt und einmal Stich und einmal die Shards of Narsil erhalten, was mich schon super gefreut hat.Stich habe ich dann direkt ausprobiert und war total überrascht wie gut es gleich auf Anhieb funktioniert hat. Zum Härten habe ich eine UV-Lampe verwendet, die normalerweise fürs Gesicht gedacht ist. Sonne ist um diese Jahreszeit etwas schwer zu bekommen ;-)Hat auf jeden Fall richtig Spaß gemacht und sieht toll aus.
DJC
Reviewed in the United States on January 15, 2025
I ordered three of the Lord of the Rings Miniverse minis, so had no idea which ones I would get. I ended up with the high elven sword, Sting, and double headed ax.The biggest challenge was mixing the colors. This was most notable with the ax and Sting. Matching both ax heads proved difficult.These cured easily in mid-day sun outside in an hour - rotated halfway through. We also cured them for a few more minutes using a combo 356nm/405nm gel polish light once they were removed from their molds. These need 365nm light. A 405nm light box I use for resin 3d printing did not work at all.The ax resin had burst within the packaging before we opened it, so had limited resin for that model. However, it was enough for two blades. The ax is a noticably different scale than the swords. I suggest running a lighter quickly over the ax before curing to remove bubbles.The swords came with two hits so we could make two models. This was nice for sting to make one blue and the other silver with a hint of blue. I had hoped to do one side silver and the other blue, but this didn't seem like it would work with the included molds. Gently pull the sword molds open from the sides to help remove air bubbles before curing and to remove the swords after curing.Overall the experience was lots of fun. The displays are nice. The models were easy to make for three adults who had never done one of these before. Follow the directions, be careful when filling the molds, and allow plenty of time to cure in the bright sun or with 365nm UV light.
Ben
Reviewed in the United Kingdom on September 25, 2024
These are super cute and detailed. The accessories are adorable. The weapons are a bit fiddly to make and require either a sunny day or UV/Led lamp to set the resin but it was still exciting seeing the final result. I’ve already ordered more!!
Patrisia Bondi
Reviewed in Italy on September 20, 2024
Molto buffo e divertente da fare, serve precisione, il .risultato è venuto molto carino e mi è rimasta molta resina e tanti glitter per altri progetti
Muge Zorlu
Reviewed in Canada on September 2, 2024
I'm happy with my purchase. It's very easy to make and quite fun. Since many reviews complained about resin, I used UV light to cure it and had no issues.
Kenny Chen
Reviewed in the United States on December 9, 2024
The media could not be loaded.
Ralph Andrew Rehor
Reviewed in the United States on October 25, 2024
I thought these were super cool when I first heard of them. But after buying a few and none of them working properly- I tossed them. First- the molds I believe are too thick. Even with A good UV lamp the swords have problems curing.Second the resin containers- they expect you to squeeze them but are of a harder plastic. Way too may air bubbles form in the molds. And at times the molds flood causing air bubbles. I’ve worked with resin plenty of times. This method is poorly executed.Third- the resin itself is not good at all. Even in direct sun 24 hours later it did not cure.And when one of the swords did- it broke in the mold. Cause again the mold is too thick to wiggle the thin blades from.For the people who have had success congrats. But I don’t reccomend these one bit. Waste of money.MGA Just make the weapons already made. People will buy them.
Recommended Products
