Shopping Cart

Your cart is empty.

Your cart is empty.

Neoteck Auto Ranging Digital Multimeter AC/DC Voltage Current Ohm Capacitance Frequency Diode Transistor Audible Continuity, Multi Tester with Backlit LCD

Free shipping on orders over $29.99

$26.99

$ 13 .99 $13.99

In Stock

1.Color:Black


About this item

  • 【2000 Counts 8233D PRO Pocket Digital Multimeter】 Wide Application: It Can Accurately Measure AC/DC Current Voltage, Resistance, Capacitance (4-2000uF), Frequency (1kHz-200kHz), Continuity
  • 【Included 9 Volt Battery】The Compartment Lid at the Back is Secured by One Cross Head Screw, Not Difficult to Remove at All; Also, Included Pair Test leads and Pair Banana Plug to Alligator Clip Cable
  • 【CE Rated Digital Mulimeter with Over Load Protection】 Designed to Safely and Accurately Troubleshoot a Variety of Automotive and Household Electrical
  • 【Large Backlit LCD Display】 Auto Polarity Display, Easy to Read Large Backlit LCD Display, Back-light Makes a Real Difference in Low Light Areas
  • 【Nice Protective Orange Shell with Stand Built】 The Case with Our Multimeter is Some Kind of Non Slip, Slightly Soft Plastic that Will Help with Drop Protection, The Stand Places the Device at a 45 Degree Angle and Makes the Screen Easy to See Hands Free



Product Description

Get Accurate Readings Effortlessly with Neoteck Multimeter by Your Side!

multimeter

Please ensure that you do not inadvertently set the meter to the mA range when measuring. This can result in a direct short circuit with the 120V source, causing the circuit breaker to trip when the same input terminal is used for both high voltage and small current measurements.

multimeter

Auto multimeter engineered to adhere to the safety regulations of IEC 61010-1 and CAT II 600V ensures your safety. The inclusion of dual fuses offers enhanced protection, safeguarding the meter from damage and ensuring precise readings in the event of voltage surges or overloads

Electric Meter‘s Attached Holster Offers High Shock Resistance

multimeter
multimeter

Continuity tester includes test leads and a banana plug to alligator clip cable, offering versatility for different measurement needs. The test leads facilitate precise circuit probing, while the banana plug to alligator clip cable allows for flexible connections to various components and terminals

Ohm Meter Features High 15mm Backligh LCD Screen for Clear Readings in Lowlight

multimeter

Voltmeter is utilized by electricians, technicians, hobbyists, and DIY enthusiasts. It is commonly employed in various scenarios such as troubleshooting electronics, testing batteries, car maintenance,checking household wiring, and measuring voltage, current, and resistance in electrical circuits

The video showcases the product in use.The video guides you through product setup.The video compares multiple products.The video shows the product being unpacked.

If you notice fluctuating voltage readings, don't worry! This meter is designed with a high-impedance feature and includes an mV range. It's normal for the data to fluctuate before initiating a measurement. Just make sure to properly connect the test leads to obtain accurate readings.


Harry p
Reviewed in the United States on January 9, 2025
It's a meter it works well, no complaints
Antonio
Reviewed in Italy on July 20, 2024
Buon multimetro
Lucy
Reviewed in the United Kingdom on May 1, 2024
This is my current main multimeter, it's served it's purpose well for quite some time now. I've not had any inaccuracies or complications with it. It will beep if you forget to turn it off, which can surprise, but that is the point, i suppose.If I have one gripe it's that it only comes with standard probes, this is fine, but I recommend getting clippers or wire grabbing probes, depending on your own use case.
CompaRay
Reviewed in Canada on December 27, 2024
Had it for two years now and working well. Small and easy to work with.
-Kunde
Reviewed in Germany on December 16, 2024
Das Gerät ist wirklich schön handlich und übersichtlich. Die Messbereiche werden automatisch angepasst, so dass man es nicht kaputt machen kann. Für jeden, der ein einfaches Multimeter benötigt zu empfehlen.
BrotherDave
Reviewed in the United States on October 20, 2024
Excellent multimeter for a reasonable price. No complaints.
Simon
Reviewed in Australia on April 2, 2020
I liked the fact that is was supplied with clips for small endpoint like car terminals.
Rick
Reviewed in the United States on February 1, 2019
It seems I'm too frequently looking for my trusty CircuitMate DM25, a Beckman Instruments multimeter that I've had for more years than I can recall. Most recently I had left it with my son-in-law when I really needed it. So I decided it was time to buy another meter so I'd have a better chance of having one handy when needed. After a little scanning of the options available at Amazon, I decided to order this Neotech model. My primary uses are AC, DC, resistance and an audible continuity function as most of my tinkering is no longer at the circuit board level where I might want capacitance measurement capability, and this meter seemed to do everything I needed and looked like a good choice even though the latter is an extra function I'd probably not use.Upon receipt, a quick check determined that the audible capability wasn't working. Since I frequently have a need to trace and identify wiring, this function is extremely handy, especially in low light and awkward locations where viewing the meter while testing is inconvenient. I contacted the supplier, and a new meter was in the mail that day. I received it a couple of days later, and the replacement works as advertised. You can't ask for better customer service than that!I really like the fact that it comes with two sets of leads... having a set with alligator clips can be really handy where there's enough room to use them as they essentially provide another set of hands. The auto-ranging capability is nice, although all it really does is minimize the number of switch positions needed since you generally know the order of magnitude of whatever you're measuring. The lighted display is a really welcome feature... I'm not sure LEDs even existed back when I purchased my other meter! Not having to break out a flashlight in tight spaces is definitely nice. Even with minimal light, the display is large enough to see at a distance. And the little fold-out stand on the back is another truly handy feature. The texture of the body and the shape of the meter also make it easy to hold. It's a little thicker than other meters, but for me the size is ideal as the minimal controls are easy to manipulate.Comparing the voltage reading capability with my Beckman, it seems to be as accurate. The only minor con is that the response time of this meter is a tad slower, especially when measuring smaller values of voltage and resistance. It often takes a few seconds to settle on a steady state reading where the Beckman was virtually instantaneous. But for me this really isn't a problem.For my purposes, this is a really nice meter for just $20 and hopefully it will hold up well. And with the responsiveness of the supplier, I'm confident they'll address any problem that may arise during the course of their 18 month warranty period.
Jack
Reviewed in the United States on February 5, 2018
Nice meter. Smaller then I expected but results match my fluke. Capacitor reading does not work at all. Left it attached to multiple caps to see of they needed to charge to be read but nothing. Really kind of a bummer because if it did this meter would be perfect. I have had cheaper meters in the past that read capacitance just fine. Not sure why it has the feature yet I've read multiple reviews claiming the same. Should have been figured out by now. I thought maybe they were just using it incorrectly but I can verify 100 percent that it does not read capacitors of any value . if you don't need that function it's one of the best multimeters i have seen at this price range. Test leads are pretty good quality and the extra alligator set makes the price worth it alone.
AlabamaSteve
Reviewed in the United States on February 26, 2018
Bought this meter for my grandson and myself. Taught him how to use it and he's very happy with it. The features I love are it's an auto-ranging meter so no fiddling with ranges on the dial, you can have the leads crossed and it indicates a negative value. It has an audible continuity check that you can turn on or off, and a back light you can turn off and on. The probes (2 sets) allow for precise application of the probes to a circuit, or allow you to clip them to contacts for hands free measurement. It had a plastic case to protect the meter and a built in stand for easy reading of the display. It even has a frequency counter built in, so it's a feature rich device. One last thing, the display is big and easy to read without being right in front of it. Those are the things that stick out to me. I have been working on electronic devices for over 30 years, and feel this meter to be an excellent value.
Jesse C.
Reviewed in the United States on September 8, 2017
For the price this is a great multimeter. Has all the functions you could want unless you're using it more electronics or high voltage purposes. Appears to be quite accurate, from what I can tell. The continuity buzzer is very responsive, though could be slightly faster - equivalent to a $100 meter a few years ago. The autorange is quite fast, no complaints there. The 2000 count doesn't give you much precision, but for more casual usage, shouldn't really matter. From what I can tell, the frequency counter is only in the kHz range but the other functions are more varied (micro Amps - Amps is very nice). This meter is pretty small, which I like a lot, similar to a fluke 100 series in form, though lighter - still has a solid weight and feels pretty rugged, however. The LCD screen cover is a very soft/thin plastic that is easily deformed that is a little disappointing as I already killed a few pixels trying to get the cover back on and pressed the screen down too hard, though you could say that was my fault there. Just be careful about putting too much pressure on the screen with your thumb. My meter also came with a screw that was much tighter than should be and it was stripped trying to take it out, unfortunately. I did eventually get it out but it was very annoying to have to deal with, the other 2 screws came out just fine. For input protection you have 1 small PTC and a couple of decent sized ceramic fuses (which don't appear to be rated, just a plastic casing). As long as you don't do anything this meter is not designed to do you should be fine. If something were to happen, the body construction has 2 shield walls to prevent any blast escaping which is good design. More expensive meters used to only use 1. The board layout looked very clean, minimalistic and spaced well appart which would probably help with arcing with the lack of any voristors that I could see.Over all: Great meter, they cut a couple corners with the build but what do you expect for $20. If you were on the fence about getting one like this or a $100+ meter and don't plan on using it for anything more than around the house or industrial high voltage or even some hobbyist electronics, I would go with this one.