Your cart is empty.
Your cart is empty.Product Description
Newentor Alarm Clock with Projection on Ceiling
Tips: Mount the sensor vertically on a North-facing wall or a well-shaded location to avoid sunlight and rain. Direct sunlight will make temperature read high. Recommended: 6 inches below eaves or placed under deck rail is preferred. The maximum transmission range to the base station is 328 ft in open air, not including walls or floors.
Projector Alarm Clock for bedroom
Atomic Projection Clock
This laser clock searches for WWVB signals to update the time and date automatically after selecting the correct time zone according to your location(-4 AST, -5 EST, -6 CST, -7 MST, -8 PST, -9 AKT, -10 HAT).
Adjustable Projection Angles & Brightness
The projection can be flipped 180°.
The readings of projection can be inverted.
The projection light has two brightness.
The screen has 4 brightness.
Package includes
- 1 x Projection Alarm Clock
- 1 x Wireless Remote Sensor
- 1 x DC Power Cord, 1 x CR2032
- 1 x User Manual
mowen
Reviewed in Canada on March 12, 2024
time on ceiling isn't very bright and the time didn't change automatically for daylight savings. This was my original problem but the company contacted me and this problem was solved. Now I have another problem. The clock will not keep time. I looked at it this morning and it was 1:30 and thought I had no sleep so checked my watch and it was actually 4 :30. This exact same thing happened twice this week. Then the clock decided to shut off by itself. It was plugged in and no one was near it and when I looked over the whole area was black. About 2 hours later the clock came back on all by itself but with the wrong time. I want to return this clock because there is no way that I can trust it to keep the right time or stay on. Very disappointed but definetly not worth paying for this clock.
Randy D
Reviewed in Canada on November 7, 2024
So far, it works great! There are a lot of features, buttons, procedures etc. so the instructions are needed. The supplied manual is reasonably good, but there are few areas that are difficult to understand. Not a deal breaker by any means however. I bought it especially for the atomic clock, and as a replacement for my existing projection clock. The projection feature works good, --it projects both clock and indoor and outdoor temperatures which is nice. One disappointment is that the daylight saving feature has to be manually switched on and off when DST starts and ends. It's not a big deal, but a bit annoying as other units switch automatically. The atomic clock feature works very well on this unit, but requires that the projection feature shut itself off for 3 or so minutes while the clock is synchronizing at night. It's not a big deal, but it did catch me by surprise the first time I noticed it blank out.
Rob
Reviewed in the United States on October 5, 2024
This arrived fast and was pretty easy to set up. The ceiling display is awesome and you can tweak it a bit and flip it if necessary. The display is bright and easy to see on it's highest setting but you can dim it down. The forecasting is lackluster but adds some personality to the display. We like that it displays the temp on the ceiling as well. Worth buying
Khin Zaw
Reviewed in the United States on October 22, 2024
Good points first, this is a nice clock with projector, day / date, indoor outdoor thermometer all in one package. It is external powered so projector can be on all time and is very bright. The clock projects time as well as indoor and outdoor temperature alternately.It has atomic clock receiver as features claimed, this is highly desirable feature as the clock keeps accurate by synchronizing to atomic clock station, but unfortunately does not work well. At any moment it could corrupt the date/time and show wrong date/time. Because of this, alarm can’t be used reliably. Atomic receiver can be disabled but product specifications does not mention accuracy of clock without atomic synchronization.I would also give big thumbs up for the merchant, very responsive, understand technical aspect and quick to take responsibility for deficiencies of product.
Customer
Reviewed in the United States on September 22, 2023
I can honestly say there is nothing that I dislike about this alarm clock. I like that it’s an atomic one which I specifically wanted to keep accurate time. I always look at it and compare it to my Apple Watch and they’re right on sync! The projection is set to show on my ceiling. It’s crisp and bright, but not so bright that it keeps you awake. You can make an adjustment on the brightness to suit your needs. I like having a dual alarm clock and I set one for during the week for appointments, and the other one for the weekend. I love having the feature of looking at my alarm clock and seeing what the temperature is, in and outside of the house, so I know how to dress for my day.I had a hard time setting the day to match the date for the particular month we were in. I reached out to customer support and they got back to me right away and told me how to correct this. There was nothing wrong with the clock, it was my own error on my part.I definitely feel this was a very good value for my money and if you are looking for an atomic alarm clock, I highly recommend this one.
Julie-Ann
Reviewed in the United States on June 19, 2023
As my title says, I needed to replace my >15 year old clock, because the temp display was deteriorating on my old one. Unfortunately, Oregon Scientific appears to no longer be a company. I found this one and hoped that it would meet my needs. You see, I wake up in the middle of the night and have found it very useful to see immediately how close it is to morning, so I know if I can allow myself to go back to deep sleep. Before, I had to wake up to some degree to peer at my alarm clock, which made it harder to go back to sleep. The red light projected on the wall does not glare in my eyes so it also does not wake me up more than needed. The temperature has been a bonus because I can already know if I need to dress warm/cold before I get out of bed.Differences between my old one and this one:1. Display on new clock table top unit is more up to date, and has more weather details. Good.2. clock is lighter and smaller than old one. Hmm-I knock it down sometimes.3. Display on ceiling is smaller. I wish it was bigger. You can make it so by making the clock project further, but that means I either cannot use the clock as my alarm, or I need to make the display go to the other end of the room, which is further from my bed. Not to good, but I can still see it.4. The projection does not rotate 360 degrees, only 180. This means that to read it while in bed, the clock has to face the foot of my bed, or the head of my bed (depending on where I place the unit). I would love to have the display face me, and project at 90 degree angle. I would suggest this change.5. The display is brighter than my OS one, which if you don't like light of any kind when you sleep--don't get this one. But it is not "in your eyes". The plus is that when the days get longer and my room gets lighter in the mornings, I can still see the display, where I could not with the OS one.6. Projected temp rotates between indoor and outdoor. I wish I could set it for only outdoor, because that is the only one I care about. I thought the changing temp would annoy me, but it actually does not. The time it takes it flip back and forth is long enough for your brain to register what you are seeing, but not much longer.7. The sensor is more reliable on this new one. The OS one would occasionally lose connection and I would not get any type of temp reading. But this may be partly because it was getting old.8. Both update the time automatically. When Daylight savings first began, I had it set to not change because I understand that DST is going away. But that made it read an hour early, even when I adjusted manually. Hopefully, this will not become an issue later.
Yuri E Amatnieks
Reviewed in Canada on February 18, 2023
Product obtained the correct time within a minute or two out of the box. No fiddling necessary. I bought it primarily for the laser time/temperature display - the other graphic features and alarms are a plus. The laser display is bright and crisp but does not light up a dark room and therefore would not disturb ones sleep. For my preference, I did not need to change any settings except to reverse the direction in which the numerals are displayed (The laser projects from in front rather than from behind.) Very please with the unit.
Brice L. Burtch
Reviewed in the United States on December 29, 2023
I purchased this clock based solely on how satisfied I am with the Q3 weather station I have. The Q6 clock is accurate, has no problems syncing with WWV. The projection is excellent the way I'm using it to project across the room. It's very easy to read at night and not too bright to keep you awake. I had some problems with the remote sensor not being picked up. I tried a few things but couldn't get it to work. I alerted support and was pleasantly surprised to get an immediate response to try a few things. When that didn't work they immediately sent a new unit without question or cost.Both Newentor products have been great. The only thing that would improve them is for them not to use blue as a color for the display. Blue is very difficult to read from a distance. Other than that these devices work well regardless of temperature.
Alberta Guy
Reviewed in Canada on November 28, 2023
It’s exceeding my expectations. I thought it would be a little goofy but it’s doing well. Accurate temp readings. Auto time setting. Big ceiling display. The transmission distance between the outside sensor and the base station is much less than claimed but it’s still enough to make it work easily. It’s a good unit so far.
D. & C. Vance
Reviewed in the United States on April 12, 2023
The projection is bright enough on the ceiling to easily read, but not so bright it keeps me awake.I recently found the time not accurate, and reached out to Newentor for help. Quick response from Mora, with steps for reseting the time. I do appreciate the great customer service and the great product. Cathie
PG
Reviewed in Canada on September 26, 2022
This device works well and comes with an external temperature/humidity sensor. The projection clock is easy to read and also shows alternately internal and external temperatures. Weather forecast is shown on the main display (obtained through RF).Setting up feels a bit confusing at first but it’s not so bad once you get it, and it works as expected.Recommended device.
Recommended Products