Your cart is empty.
Your cart is empty.Product Description
MK1012503
About NICHE
NICHE provides Powersports replacement parts. Some of the NICHE product categories include cylinders, brake pads, axles, off-road mirrors, and drive chains. NICHE parts are here for when you need them the most.
NICHE Cylinder Piston Gasket Kit Part Number MK1012503
- Includes: NICHE Cylinder Piston Gasket Kit
- Compatible with the following brands: Yamaha
- Compatible with the following models: Blaster 200 YFS200
- Compatible with the following OEM's: 2XJ-11311-02-00, 2XJ-11311-01-00, 2XJ-11111-00-00, 3JM-11351-02-00, 3JM-11351-01-00, 3JM-11351-00-00, 2XJ-11351-00-00, 2XJ-11181-00-00, 3089277, 3070171, 3070156
- Compatible Vehicle: ATV
- Placement on Vehicle: Front
- Cylinder Bore and Stroke: 66mm x 57mm
- Cylinder Material: Aluminum
- Cylinder Displacement 195cc
- Cylinder Coating: None
NICHE CYLINDER
- ATV engines come with either one or two cylinders
- Displacements typically measuring between 100cc and 800cc
- It's important to note that safely riding an ATV requires a certain amount of body weight and physical strength
- Disaster can strike, for example, when a young rider uses an overpowered or a larger ATV
NICHE PISTON
An ATV piston is a component of engines, pumps, and gas compressors. It is located in a cylinder and is made gas-tight by piston rings. In an engine, its purpose is to transfer force from expanding gas in the cylinder to the crankshaft through a piston rod and or connecting rod
Piston Anatomy
A piston is a cylindrical engine component that slides back and forth in the cylinder bore by forces produced during the combustion process. The piston acts as a movable end of the combustion chamber. The stationary end of the combustion chamber is the cylinder head.
Piston Components
ATV Piston components include the piston head, piston pin bore, piston pin, skirt, ring grooves, ring lands, and piston rings. The piston head is the top surface of the piston which is subjected to tremendous forces and heat during normal engine operation
NICHE GASKET
A gasket is a mechanical seal which fills the space between two or more mating surfaces, generally to prevent leakage from or into the joined objects while under compression.
Some Types of Gaskets:
- Head gaskets create a seal between the engine block and cylinder head. This seal establishes a proper compression and prevents fluid leaks into the cylinders
- Base gaskets create a seal between the top-end of your engine and the engine cases. Stop pesky engine oil leaks before they cause permanent damage to your engine.
- The valve cover is sealed to the upper section of the engine cylinder head by a valve cover gasket. As it passes around the camshafts, rockers, and valves, the gasket stops engine oil from seeping out.
Ian
Reviewed in the United States on February 26, 2025
Piston came in with a chip out of one of the ring lands. And a pin hole in the side of the piston skirt. Cylinder came with boogered ports that needed to be filed down or dremeled out. Cylinder and head stud holes dont line up perfectly so there was some clean up to get the head to actually go onto the studs. Other than all that. It works. Idk how much I would trust it in the long term but the bike did start up and runs ok.Lastly a few parts this kit does not come with like new studs and wrist pin bearing there are better more complete kits. I wouldnt recommend this one.
Recommended Products
$528.95
$ 99 .00 $99.00