Your cart is empty.
Your cart is empty.Features: Input Voltage: 12V Max. Output Power:720W Max. Input Current: 60A Switch Panel Size: 3.74" *2.65" Switch Panel Material:High quality ABS and aluminum Circuit Control Box Size: 6.26"*3.52"*3.27" Circuit Control Box Material: High quality ABS 8acklighlDimmable Function:Yes Operating Temperature:- 40° C ~ + 105° C Over-Voltage Protection,Over-Current Protection Reverse Polarity Protection and Thermal Protection Dimmable brightness of the background lighting color Control 6 LED lights & electrical accessories at the same time Customize your personal switch panel with 50pcs DIY stickers 2 Mounting options All in one design
Ryan
Reviewed in the United States on March 10, 2025
Well built and works well.
erica joy csabon
Reviewed in the United States on January 30, 2025
Had this for 10 months and worked fine. All of a sudden we had intermittent failures where the switch would light up for a split second and then just blink a little red light. We contacted Nilight and they required us to take videos of all of the connections that could be faulty. After a few emails and some videos (yea its a pain to pull apart shtuffs) they replaced the entire switch and shipped it to us with no charge. Not sure what the problem was, I changed out the switch first because it was easiest. Still did not work, then the relay box, and tested with old switch, still did not work. Then I replaced both, and everything works fine now. That was a few months ago, and everything is still working properly. I have a few Nilight products, and they are def worth their value for the price.
paul
Reviewed in the United States on January 27, 2025
I got this because I wanted to have multiple lights but not a crap ton of switches. This makes life so much easier, and convenient! I did make a youtube video of the installation, if you'd want to check it out feel free! It's called auxbeam switch pannel and pod light install! I highly recommend this product to anyone that is in the same situation as i was.
Riley S
Reviewed in the United States on August 24, 2024
So, when it works, it works! It’s a great system that isolates your aftermarket lights completely from the factory systems. In fact the control boards are completely isolated from the load side, via relays. It looks good, at a reasonable price. But here’s why I’m leaving it a one star review. I’ve gone through two of these units, both have failed in under a week of light duty use. With no more than 12hrs of run time on the load side.After doing some diagnostic tests, it was a logic chip failure in the relay box, in both instances. Everything was being fed, nice clean 12-13v DC, including the ignition tap. Speaking of which, we went so far as to check the power feed on the ignition tap with an oscilloscope, and it was completely within expected deviation. Grounds exceeded load test, no resistance anywhere. Everything is properly fused, to boot.The issue is that they use poor quality components that like to give up the ghost. These units are cheaply made and use unmarked components across the board. I do not recommend this system from this distributor.
Marlon
Reviewed in Canada on May 17, 2024
Wow love this unit made for an easy install, only down fall is wish you had option for a neg battery box as well. Luckily had a distribution box laying around from a stereo install I never used so have main back up battery neg line going to box beside this gang switch box.
Muy malo no funciona artículo usado
Reviewed in Mexico on December 31, 2024
Artículo usado y no funciona como se atreve a vender cosas usadas y sin funcionar
Norman Drimmie
Reviewed in Canada on September 3, 2023
Overall a great switch pod/controller, instructions are pretty plain however so some electrical knowledge helps if installed by self, which for most should be doable. Only thing I would like to have seen added is a way to mount the fuse box but get it’s near impossible to have a universal mount.
Ron Combs
Reviewed in the United States on August 10, 2023
I bought this switch after returning an Auxbeam switch that didn't work at all. I installed everything per the instructions, the install is fairly simple, the switch is in a (Can Am Maverick X3), however, when I connected my side mirrors w/lights, to the controller panel,they looked like they were on, even without the car turned on, it's like there was a residual power going to the controller, the lights come on fully when the circuit they are on is turned on, however, they never go off completely. this is an obvious issue as it will continually drain the battery. These xprite side mirrors worked fine when I had them hooked to the rocker switch, so it has to be the controller.I also have my particle separator connected to the controller and it does not do that, it only comes on when the switch for that circuit is activated. I gave it two stars because it could be a good controller, if it worked correctly, I am interested to see how good the two year warranty is?***UPDATE***I wanted to update my review of this product. After contacting Nilight customer service and explaining the problem I was experiencing, and a quick video of the issue, they sent me a whole new controller. Once I installed the new controller, all the issues described above went away. I want to say kudos to the Nilight customer service team, they did a great job of listening to the issue and rectifying it in a timely manner.
Omar Almdani
Reviewed in Saudi Arabia on December 4, 2023
عملي جدا ويتحمل
Terrapin Overland
Reviewed in the United States on December 23, 2023
I have had great luck with NiLight products in the past and this 6 button switch panel is no different. The panel itself has a nice heft to it. And the buttons seem to work well. The fusebox is Ok. I only say Ok because the cover is a bit flimsy, but the base unit holding the fuses and relays seems to be a better grade of plastic or at least it's way thicker and not flimsy.I wired up 5 of the six switches and immediately was sorry I did not get the 8 button model for scalability. :-o :-)My clock spring on my steering wheel is bad so my horn only work when the wheel is not in the 12 o'clock position. I configured one of the buttons a horn button that only works when you're pressing the button. The other buttons are configured to be traditional press for on and then press for off.I really like this thing.
Rex w.
Reviewed in the United States on October 17, 2023
I recently purchased the Nilight 8 Gang Switch Panel System Circuit Control Relay System Fuse Wiring Harness for my vehicle, and I am extremely satisfied with its performance. This wiring harness has made the installation process a breeze, eliminating the need for complex wiring setups.One feature that particularly impressed me is the automatic dimmable LED switch pod. During nighttime driving, the panel's lights automatically dim, providing a more comfortable and less distracting experience. This convenient feature ensures that I can easily locate and operate the switches without compromising my concentration on the road.Moreover, the overall quality and build of the switch panel are commendable. The switches have a solid feel to them, indicating their durability. The wiring harness is well-organized and neatly bundled, making it easy to install and maintain.With the Nilight 8 Gang Switch Panel System, I no longer need to wire up multiple switches individually, saving me time and effort. The Dimmable ON and OFF LED switch pod feature is a game-changer, providing added convenience for nighttime usage.In conclusion, the Nilight 8 Gang Switch Panel System is an excellent wiring solution for cars, trucks, campers, and SUVs. Its user-friendly design, automatic dimming feature, and overall quality make it a top choice for anyone seeking a hassle-free wiring solution.
Salah Elnahlawy
Reviewed in the United Arab Emirates on January 24, 2023
Item is not as described or shown in the image very poor I need my money back
Recommended Products