Your cart is empty.
Your cart is empty.Product Description
Shop With Auto Parts Prodigy For Outstanding Service and Great Prices
US Based Small Business
- We are are US Small Business, with US based support. Your purchases help support a local New York Family.
Built For Professionals
- Our Products are tried and true tested out in the field by many technicians.
Strick Quality Control
- Products are tested to ensure low defect rates
Brett
Reviewed in Canada on January 6, 2025
Fix perfectly on my 03 all i needed was the o rings but the original had over 300k on it so was due for a replacement this one works really well
Timothy Brake
Reviewed in Canada on November 9, 2024
The product looked well built and was a proper fit. I would order it again.
Customer
Reviewed in the United States on January 26, 2024
Was so glad to get this and now my truck doesn’t pour oil out when I start it
Placeholder
Reviewed in the United States on January 19, 2024
As the title says the oil cooler itself is made very well but beware the gaskets are not up standard. If you purchase this cooler buy Motorcraft or Mahle gaskets and use those instead
KRS
Reviewed in the United States on March 22, 2023
Part works great
Erin Prince
Reviewed in the United States on February 28, 2022
Ordered this cooler for my 2002 7.3 after debating with myself about resealing original cooler and getting new unit. Had a decent leak from original cooler seals especially through this past winter in NC. Decided to go ahead and pull the trigger on this one and I was happy with shipping, product arrived early and undamaged and seems to be made with quality in mind. No issues with installation, everything fit as it should and went in perfectly. The kit has fixed my leak issue! But I will say I’m running about 5-10° hotter oil temp now with this unit, both loaded and unloaded. Around town it cools just fine but on the highway or with a load it’s seems to get a little hotter than the original. There are a few factors to consider. Usually I run t4 oil but had to get t5 when I did install because that’s all I could find and that may play a role in the increased temp. Also might have too much water in my coolant as I have never drained the block completely before and when testing my seals I used strictly water in case I had a leak. So perhaps my coolant isn’t at a proper 50/50 mixture. Just food for thought. Overall happy with my purchase, have put about 2000 miles on since install and still no leaks, so time will tell the real story. Gave 4-stars because of temp increase over factory. I will do some process of elimination and see if any of these factors have affected the temps or if it is just the flow quality of this product affecting my oil temp.Update: been about 5 months running this cooler, put almost 10k miles on it. So far so good! Still no leaks and is performing just fine. As for running at higher temp I guess that’s just normal for these Chineseium coolers. Drained and replaced coolant from block again to get proper 50/50 mix and I’m back to T4 rotella oil. Still running about 10° hotter oil temp than original cooler. Overall still very satisfied with this product. I am running 200° around town and between 210-220° highway at 80mph 2200rpm with 3.73 gears and it’s about 90-100° outdoor temp recently. Loaded or not it’s always around 220° which I don’t particularly like. Time will tell, no issues thus far.Update 3/25/23:Truck is at 440,000 miles and the cooler was installed at 418,000. Recently the oil cooler has ruptured internally. I now have oil in my coolant. Just replaced the cooler with original factory cooler and fresh seals. Which fixed this issue. Glad I kept the factory cooler for just this event, if it happened! This product lasted me 22k miles, not to mention the factory cooler has returned my truck to normal operating temps no higher than 210° oil temp. I am changing my review to 1 star. Not a good product, don’t make the mistake of buying this unless you intended to do it twice! Simply reseal the factory cooler if it is working fine, and your just trying to fix the leak!
Wizard
Reviewed in the United States on January 19, 2021
Just like oem quality works well
Steve Van Slycke
Reviewed in the United States on September 3, 2020
This product is of quality and I believe the manufacturer and seller mean well but I have had a less than perfect experience. I am going to reach out to the seller. My situation: I installed the cooler with very little problem and after about 100 miles it developed a small weep of oil at idle at filter end. When at road speed the leak is quite a bit larger. I am hoping that seller will offer to send new gaskets and “o”rings so I can re-do this project.I will follow up with results.SteveHere is my follow up: It is not 3 hrs. Since I wrote the above comments, I have left a voice mail and I found a return text message in Amazon from the seller. We have about 5 minutes of discussion and The Seller is sending me ne gaskets and “O”rings so I can re do the project.I can’t ask for any better service than that! This is a #1seller, and I will look to buy from them again!!!🙂
Customer
Reviewed in the United States on August 4, 2020
Product was exactly what I needed . Fit right seems to be working good and much cheaper than the parts store
Karina Lavoie
Reviewed in Canada on September 30, 2019
Exactly what I was looking for.
Steve
Reviewed in the United States on October 19, 2018
I can tell this was well built and it fit perfectly! I’m glad I didn’t buy the cheaper version.Remember to drain all fluids, if you find oil in your radiator housing tank be ready to learn how to flush the engine. Also be ready to press the oil cooler into the housing, I was able to do mine by body weight, and rubber mallet. This took me about three hours with flushing my engine. Great You Tube videos on both.
Recommended Products
$55.66
$ 29 .99 $29.99
$31.99
$ 14 .99 $14.99
$125.80
$ 61 .99 $61.99
$42.89
$ 19 .99 $19.99