Your cart is empty.
Your cart is empty.Product Description
PC-Pool Putty Epoxy is a hand moldable putty epoxy designed for quick emergency-type repairs. PC-Pool Putty Epoxy is formulated to adhere to wet, dry, and submerged, underwater surfaces that are clean. Cut, mix and apply. PC-Pool Putty Epoxy allows a working time of about 3 minutes and cures for service in 60 minutes. PC-Pool Putty Epoxy will not bond to wax paper, Teflon, Polyethylene, and some other plastics. There are hundreds of uses in thousands of combination. Works Underwater. Good for skimmers, tile, concrete and many other applications.
From the Manufacturer
PC-Products, celebrating 75 years of “Fixing Your Things”, with quality, reliable repair products. Repair solutions for just about anything that needs repair or what you can manage to break. From Concrete to Wood restoration and heavy duty permanent repairs, we have you covered.Yeah; We can fix that
JY
Reviewed in the United States on February 16, 2025
Work well for spot treatments. Dries quickly and can be applied underwater.
mananto1948
Reviewed in the United States on January 15, 2025
Good Job. Tks.
Brad Capeling
Reviewed in Canada on September 9, 2024
I used this to stop a leak near the bottom of my stairs in our inground pool. Kneaded as instructed and forced it in where the leak was. Hardened up as it mentioned when cured and no leak! NOTE: If your pool is leaking water, save having someone come out by using food colouring in a syringe. Squirt a bit of the colouring around suspicious areas like stairs, jets, skimmer, light, etc. You will find the leak likely as I did...just look for the colouring to disappear and you know you found the leak.
FROISKY
Reviewed in the United States on September 30, 2024
I bought 6 of these and felt bad and I should have stuck with my other favorite, Leakmaster Epoxy Stick, albeit more costly. This product does not cure well, remained sticky even after thorough kneading. I will not recommend this product.
Jay Whitney
Reviewed in the United States on July 5, 2024
This epoxy is the best ever! No more mixing liquid 2-part epoxies and wondering if you squirted out an equal amount of each, then having it drip all over. This epoxy is clay-like in consistency, so you just cut off whatever size you deem necessary, and knead it. It even can be applied under water.
Poolman499
Reviewed in the United States on July 29, 2024
It worked and it sealed the leak but it didn't last. Maybe I didn't get the surface clean enough for something but it didn't hold for more than a few weeks.
ROY A.
Reviewed in the United States on July 2, 2024
It worked but I needed a better video on YouTube to make it work. The biggest issue was how much kneading was needed
eyespy
Reviewed in Canada on July 18, 2024
Fantastic product. Used JB Weld's version before which is a nightmare to use. Super sticky trying to apply it under water and nearly impossible to shape.This is not sticky and very easy to apply and shape underwater. So pleased I bought 2 more units to have on hand.
Gale M Witt
Reviewed in the United States on February 19, 2024
Had a leak around one of our pool return jets. this epoxy stick was easy to use. Just cut off a section from the tube and kneed the two together until a consistent color. Placed the product around the underwater leak area and carefully molded into the area of the leak. It hardened underwater in about 10 minute and completely solved the problem. Did not have to drain pool down below leak. Excellent repair and solved the problem. Yes I recommend and very satisfied
TerTer97
Reviewed in Canada on August 5, 2023
It is so easy to use, fixed my leaking pool filter! Saved cost of a service person.
Customer
Reviewed in Canada on July 28, 2021
as advertised, easy to mix epoxy and cured under water.
Juliet
Reviewed in the United States on July 27, 2018
This product was an excellent choice to quickly resolve a leak in my in-ground swimming pool.My leak was on the exterior of one of the 1½" Schedule 40 PVC pipes penetrating the side wall for the pump return jet.In my case the fitting for the jet nozzle was a friction fit to the pipe interior, so I slid out the jet nozzle so the junction between the 1½" PVC pipe and the cement / Diamond Bright wall was exposed.A utility knife was used to dig out any loose cement / Diamond Bright around the pipe prior to starting, increasing the leak slightly at this point.A suitable length of the epoxy rod was cut off, then mixed by hand until a uniform color was attained.That mixed epoxy was forced into the gap between the 1½" PVC and the cement / Diamond Bright, until I was unable to push any more into the gap.The leak was identified prior to the repair using liquid food coloring and a children's oral liquid medicine syringe. This permitted placing very controlled small drops of coloring in the water near the suspected leak, then watching the water flow forcing it through the wall gap. Once the epoxy repaired the leak, the food coloring demonstrated the leak was fixed.
London Customer
Reviewed in Canada on August 19, 2016
Excellent product
Recommended Products
