Your cart is empty.
Your cart is empty.Product Description
Myard decking product and tools for DIY or contractor projects.
Deck Post Base Cover Skirt Flange with Screws (4x4 and 6x6 inches)
- 2 sizes options: 4"x 4" post (actual 3.5"x 3.5" dry post on market) ; 6"x 6" post (actual 5.5"x 5.5")
- Perfect for deck supports, porch railing, handrails and post holders. Also, can be used as table leg / mailbox post support brackets.
- Sanding / trimming may be required depending on post type and little size error.
- POST HEIGHT LIMIT: 60" (5-feet), NOT for roof support.
- Made from paintable durable High-Strength Nylon + Anti-UV + FRP (Fiber Reinforced Plastic). NO fading, aging, and weakening from sun exposure. UV-resistant.
- Stainless Steel 304 screws are included: 8 short screws (installed horizontally) to post. 12 long screws (vertically) to deck floor board.
- Thicker & higher post base bottom for better structural strength on decks.
- Clean contemporary style. Re-designed for better looking. Fast & easy post installation in minutes.
Deck Foundation Block for 4x4 Inches posts and 2x4 lumber stud joists
- QUICK BUILD: Stackable & light. Easy & instant to ship, carry, position and install. Only weights 2 LBs/each, replaces heavy concrete (50 LBs).
- APPLICATION: Quick foundations for home improvement projects such as deck, garden shed, landing, walkway, BBQ area, poolside, cubby house, dog shelter and more.
- CAPACITY: Each block designed to support up to 1700 LBs. Bigger bearer footing pad size 12"x12".
- COMPATIBILITY: Four way recess to accept standard 2"x4" (actual 1.5"x3.5") lumber stud joists; Accepts 4"x4" (actual 3.5"x3.5") or 100x100mm posts.
- OPTIONAL HOLES: 5 holes on top platform for wood screws; 4 holes at corners for ground anchors.
- QUALITY MATERIALS: 100% New Polyamide #66 engineering plastic used + Glass fiber reinforced + High rating Anti-UV added.
- NOTICE: It is recommended to check your local building guidelines / code before starting your project.
- Not for post or beam go tight into a corner.
- *** IMPORTANT: Fits standard posts of 4x 4 (actual 3.5"x 3.5") inches. See images, or ask us if any questions before ordering. Thanks.
- Matte/fog surface on top; Matte/fog surface on bottom base.
- 5 holes at bottom base for gluing on 4"x 4" post. (see images)
- Screw-FREE (Nail-FREE) installation. ONE-PIECE structure, solid and durable. Pack of 1. Sanding / trimming may be required depending on post type and little size error.
- Made from HIGH impact, UV stable (anti-UV) ABS resin. Same as Golf Course Sprinkler head.
Deck Board Jig Spacer Rings for Pressure Treated, Composite, PVC, Plank, Hardwood Decking Tool
- 5 sizes: Red 1/8", Orange 5/32", Yellow 13/64", Green 1/4", Blue 5/16".
- Place spacers between installed and uninstalled deck boards to unify the spacing gaps, pull out spacers after installing each board. Useful tools for your decking project !
- Durable, bright-colored plastic for easy finding the right spacer size.
- Unique circular corners + blade slice design for no denting and marring to deck boards.
- 20 pieces in box for long spans decking.
- Included plastic jar box with lid and carrying handle for easy storage.
Myard Iron Steel Balusters for Deck Railing Handrail Porch
- Classic Round - (diameter: 3/4"), in Length 26", 29", 32", 36"
- Estate Square - (cross section: 3/4" x 3/4"), in Length 26", 29", 32"
- Estate Square Facemount - (cross section: 3/4" x 3/4"), in Length 31", 42"
- Large Classic Round - (diameter: 1"), in Length 26", 29", 32", 36"
- Large Estate Square - (cross section: 1" x 1"), in Length 26", 29", 32"
- Traditional Rectangle Facemount - (cross section: 1" x 1/2"), in Length 32", 38"
- Straight Flat - (cross section: 1" x 1/8" solid), in Length 29-1/2", 32-1/4"
- Baroque Curve - (cross section: 1" x 1/8" solid), in Length 32-1/4"
- Arc Curve - (cross section: 1" x 1/8" solid), in Length 32-1/4"
Mike Taylor
Reviewed in the United States on September 14, 2024
To attach my 2x4 to deck railing it made life easy, you could have screwed the 2x4’s to the post but this makes for a better looking job. A great product and would buy again.
dennis bool
Reviewed in Canada on September 11, 2024
Works great
Brian
Reviewed in the United States on June 20, 2024
When I first received them I tried placing them on the handrails and they wouldn’t fit, I used an oscillating saw to notch out the sides of the board (a wood chisel would work too) then they fit great and installation was easy after that. One other tip when screwing them to post, half screw in each side and then tighten down when you are ready
Customer
Reviewed in the United States on November 4, 2024
Easy to install and looked good. Its a little too expensive.
hifialan
Reviewed in the United States on October 2, 2024
These are hardcore and worked great. We were able to complete our project in no time with these.
Ross or Brenda Terelli
Reviewed in Canada on July 23, 2023
Sturdy and functional and easy to install. Not cheap plastic but a hard composite. Worked perfectly and better than what was there originally. Will buy again if needed.
Kevin
Reviewed in Canada on June 13, 2023
Way better quality than anything the big box hardware stores sell. Fits a 2x4 rail perfectly and adds a nice finished touch.Perfect for what we needed. Highly recommend.
Brian
Reviewed in Canada on May 29, 2023
My local hardware store carried a different brand that had smaller cheaper screws and the plastic wasn’t as nice
JC
Reviewed in the United States on December 19, 2023
These worked GREAT. Easy to use and the screw holes are angled to help get the screw started at the correct angle. PRO TIP-cut the railing to size less 1/4" for the thickness of the two end pieces (1/8" each). Pilot drill the holes so there's zero splitting. Screw the pieces to the ends of the railing first then screw to the posts. I was tempted to use longer screws than those provided but they are rock solid with the kit screws.
Ethan
Reviewed in the United States on October 13, 2023
Wow, these are great. Really solidly made and a fantastic design. The 2 center holes attach to your cross member, and the 4 side holes attach to the post, making a very sturdy attachment set up. As for the screws that people are complaining about, I have no issues at all. They are square drive heads and epoxy coated. As long as you use a square drive bit to put them in they work fine, and since they are coated they will resist rust as well as all other epoxy coated screws. Very happy with my purchase :)
LD
Reviewed in the United States on January 14, 2019
I debated whether or not to spend the extra money on these or to just install the rail on the outside of the posts. I am SO GLAD I went with these. Absolutely worth the added cost.They allow you to install the rail BETWEEN posts, rather than flush mount on the outside. A much cleaner look, imo. And depending on the angles you have, it might be necessary.They are made of high quality plastic that will never corrode or break. You would have a hard time breaking these if you tried. The included screws are nice as well.They are easy to install and provide a VERY solid installation of the railing that will never come apart. I would argue that these may actually be more secure than an outside rail mount. You do have to cut the rails precisely, though.If you are installing black ballusters as I did, these will actually make your railing installation look nicer, overall, rather than being an eyesore. My wife and I are both really happy with these and glad we spent the money on them.
Customer
Reviewed in Canada on May 17, 2018
arrived as advertised....
Gil
Reviewed in the United States on July 24, 2016
Railing connectors are great. The included screws are garbage. Even if you pre-drill pilot holes, these screws will very easily strip. Make your life simpler and assume these rail connectors don't come with screws. Throw away the included screws and get some nice screws. You will be much happier and the installation will go much faster than messing around with the included screws.
Recommended Products