Shopping Cart

Your cart is empty.

Your cart is empty.

Prestacycle Schrader Hose Barb

Free shipping on orders over $29.99

$6.00

$ 2 .99 $2.99

In Stock

About this item

  • Prestacycle Schrader Head



Product Description

tire inflation pressure hose with gauge valve adapter compression pump repair bike

Prestacycle Schrader Hose Barb

Use it to upgrade your floor pump or tankless electric inflator to use Prestaflator heads and accessories. Made with 6061-T6 Alloy – Strong as Brass and only 1/3 the weight. Standard barb fits 1/4″ inner diameter hose.

Note - Hose clamp not included. The correct hose clamp varies based upon the outer diameter of your pump’s hose.

barb

Specifications

  • Upgrade your floor pump or tankless electric inflator to use Prestaflator heads and accessories.
  • Made with 6061-T6 Alloy – Strong as Brass and only 1/3 the weight.
  • Standard barb fits 1/4″ inner diameter hose.
  • Hose clamp not included. The correct hose clamp varies based upon the outer diameter of your pump’s hose.
  • Prestacycle is dedicated to putting new ideas and innovations in the hands of cyclists. As life-long cyclists, we understand it’s about riding and actually being on the ride. We make products to do the right job quicker, and give you more time in the saddle.
Ride fast

Detnire
Reviewed in the United States on March 11, 2025
Many uses where venting or filling pressure is required. Used as a vent in vex robotics pnuenatucs system and venting fuel injection manifold to drain fuel
Brian Boos
Reviewed in the United States on February 19, 2025
It worked perfectly
Customer
Reviewed in the United States on August 26, 2024
Works perfectly.
Gregory Girard
Reviewed in the United States on December 3, 2024
What's the little part is made of good material and does what it's supposed to. No leaks seals easy. Easy to install.
jckc528
Reviewed in the United States on January 8, 2024
The modern push on tire fillers are very hard to use on utility tires. You need to use this old-fashioned screw on adaptor like we used in the '50s on our bicycles! You will loose a nominal amount when unscrewing this the loss is minimal.
Tim Stewart
Reviewed in the United States on April 19, 2022
After struggling with lock-on presto hose heads, I decided to use this product. Problem of airing my bike tires solved. Compared to the lock-on type, this works effortlessly with a minimal loss of air pressure when unscrewing the head. Simple & secure. Installed it on an old Schwinn pump replacing the lock on head. Now it's a pleasure, not a pain to gas up the tires.
J. Elliott
Reviewed in the United States on June 25, 2020
Looking for a barb end shraeder hose adapter, on Amazon I could only find this unit and a Silca brand. My first impression was to go with the Silca, as they have been around forever, make high quality parts, and their connector was nickle plated brass. This adapter is listed as 6061 -T6 aluminum, which sounds impressive, but really is the most common form of aluminum used, and has about 1/2 the hardness and strength of 6065 Aluminum. And is a stretch to say it is as 'strong' as brass, as there are a dozen or so ways of measuring strength. 7075-T7 maybe, but not 6061.But then, reality set in: My wallet already hemorrhages money into my TRI bike without needing an additional outlet! The Silca adapter is 2 1/2 times the price of this unit, plus another 7 dollars shipping if I don't want to wait 2 weeks. And 6061 aluminum is probably just fine in my application, where the barb will be secured in a hose, and a pig tail chuck threaded onto the connector will never be removed until something fails. Not like the alloy is meant for use in a spoke nipple or disk brake wheel hub. So without a lot of mechanical flexing, I figured this would be just fine for my use.It arrived in a sealed zip lock bag, was nicely finished, inserted easily into the hose and secured nicely with the plastic hose clamp I bought at the hardware store. The shraeder valve chuck I attached threaded on nicely, without binding, and there were no leaks. It probably isn't as strong as the Silca, but it is a LOT less expensive, and seems just fine for my purposes.
Arthur Resler
Reviewed in the United States on October 29, 2019
The title is misleading, as many commentators have noted. The Schrader threads are the common nominally 1/4" size, but the barb is actually much closer to 3/16. The major diameter of the barbs is 0.211", the minor diameter is 180.Note that it is impossible to remove this style of fitting without losing some air: at least I can't unscrew it fast enough to not lose some air. This is not a fault of the fitting.
Client d'
Reviewed in Canada on February 13, 2017
très bien