Your cart is empty.
Your cart is empty. Package included:
Scissor jack x 1
Handle x 1
Specification:
Condition: Brand new
Minimum height: about 105MM
Maximum height: approximately 385MM
Lifting: 2T
Color: Black
Material: Steel
Net weight: 2.1KG
Item Size: 41*8.8*9 CM
HEIGHT/CAPACITY CURVE
This device is designed to sustain the following loads at these specified heights. DO NOT EXCEED the rated capacity for each position.
Before Use
1. Check before each use for abnormal conditions such as cracked welds, leaks, damaged, loose or missing parts.
2. Inspect the jack immediately if lift is believed to have been subjected to an abnormal load or shock.
3. If the jack is found to be damaged, it should be removed from service until properly repaired.
OPERATING INSTRUCTIONS
1. Insert the jack handle into the hole of the handle socket.
2. Make sure that the saddle is correctly positioned. To prevent damage to the jack, do not move the jack while the handle is intact in the socket.
3. To raise load, use one hand to hold the front part of the handle and use the other hand to turn at the rear and of the handle clockwise.
4. To lower load, use one hand to hold the front part of the handle and use the other hand to turn at the rear and of the handle counterclockwise slowly.
CARE AND MAINTENANCE
1. When jack is not in use, lifting arm should be in full down position.
2. Always keep jack clean and keep the screw and bearings well lubricated.
3. Store the handle with care.
kelvis valencia
Reviewed in the United States on June 7, 2024
Buena inversion
Mary stevens
Reviewed in the United States on May 13, 2024
works well for me
Sergue Iapryntsev
Reviewed in the United States on October 23, 2024
The item is as described, has fast delivery, and is reasonably priced.
Nestor Ortega
Reviewed in the United States on January 17, 2024
Just as the pictures, nothing less nothing wrong. Working as expected
Lawrence R. Lull
Reviewed in the United States on March 16, 2022
Jack is ok on the bottom but the top part that slots into the Toyota Camry jack area is its weak point having only one bolt holding it to the bottom structure (wobbles), where Toyota jacks have four solid bolts in this area. Have returned the jack to the vendor two weeks ago and have received the refund.
upendra chhaya
Reviewed in the United States on September 15, 2021
For my Toyota camry
Alex Fagbayide
Reviewed in the United States on January 28, 2020
Okay
Michael P McGee
Reviewed in the United States on June 22, 2018
My BMW E91 weighs 2.5 tons. I would bet most BMWs are over 2 tons, so this jack shouldn't be recommended for BMW.
Recommended Products
