Works great. I can't complain! (Installation is something else 🤷🏾‍♂️ saves a FEW hundred dollars.

Definitely fit and works great

Works good.Horrible to install. Watch YouTube. Have to remove gas pedal and it's a tight fit.

I got the fan installed after a few hours of taking the old one out and trying to get the new one in. It was extremely stubborn to go back in, and after a bit of trying I realized that the dimensions were slightly different than the original fan. When I compared them the Locking mechanisms were one to two millimeters off from the original. I was able to file everything down and grease it and finally get it in with a lot of effort.Now that it's in, the fan works great. It's quieter than the original, but I suspect that there was something wrong with that one from the very beginning.

It was a easy fix Great quality part better price on Amazon

This doesnt even fit the rogue it is absolutely garbage an useless . Waist of time waist of money and waisted money paying a garage to take it out an yhen find out it doesnt fit . Absolutely not happy

order placed Jan, 25 2024. installed at shop June 20 2024, it is now Oct 29 and need to have a new one installed by the dealer, if you turn up past 1/2 speed it shakes the whole dash. Should have gone to the dealer in beginning but tried to save money now going to cost twice as much..

The AC and Heat work amazing now. (there was no air before) I got this for a 2013 rogue and it was a bit smaller than the original but it still fit in place and connector was the same. Also the power of the blower is good. It makes a different noise. Not necessarily more noise than original but higher pitched. Overall good purchase. It is a PAIN to install though.

Ne fait pas pour nissan rogue 2015 le moteur tourne pas dans le même sens et la turbine est plus courte de 1"3/4

Does not fit . Base is to big and fan is short.

DO NOT BUY!!Im super dissapointed with this purchase. It clearly says this will fit a 2014 Nissan Rogue in the product description and picture. After waiting forever to arrive even though I payed for expedited shipping, my mechanic said its not the right fit. Such a waste of time and energy!! This should be removed from Amazon for false advertising. Absolutely ridiculous

When compared to the factory fan it looks exactly the same except the hamster wheel is shorter when placed on the circular end. This does not interfere with the installation. It seems to be making more noise upon first listen. No problems so far but no real driving done. The auto parts store had one for $90. If I knew how difficult the installation was going to be, I might have gotten a more expensive one here on Amazon (hopefully that would mean it's better).I would like to say that installing one of these even with plenty of YouTube video research was 6 hours, mostly of misery. You should replace the resistor while down there, and if you check it first, you might be able to cut things a little shorter and keep your old blower in at least a little while longer.I recommend starting with a vacuum of the driver's floor area, because you're going to be all over it. Taking off the panel under the steering wheel and leg area air duct is shown in the videos. I'm not sure if this is absolutely necessary, but it does give you more space to work. This also involves disconnecting the hood latch which is a pain and even more of pain to put back together. You will need to remove the side panel to the right of the driver's legs. It just pulls off. Hopefully, you've done this before to change the in-cabin air filter. You might as well change that filter while you're down there. They should be in stock at an auto parts store for about 10-15 bucks. You will need to remove the brake/gas pedal assembly. There's a black box with three electrical plugs with clips that needs to get out the way (it's recommended you disconnect the negative battery terminal before doing this). You will also need to fight with a U-shaped thingy that's part of the brake pedal assembly or just remove it. It might sound easy but things don't want to cooperate and you'll be down there struggling to get light where you need it and get your arms where they need to go and if you're a smaller guy, you might struggle with getting the strength into some things. I needed a long socket wrench to turn some nuts. I recommend plugging in the blower motor before installing it. One of the big struggles was getting it plugged in after it was physically installed.You will need:A Phillips screwdriver for the air duct removal and several other things. Sometimes a short stubby one helps.A pretty average size torx bit or driver for the panel under the steering wheel.Needle nose pliers for various thingsPreferably long sockets that can go over about 1.5-2 inches of bolt to get to nuts.Socket wrenchesLights of various types. Small lights that can hopefully get where you need'em and stay there.Vice grips or larger pliers if the blower motor won't turn all the way to where it needs to go.It helps to have a foot high stool or something to put your body on as it extends out the car.

My blower fan was making lots of noise on my 2007 Nissan Sentra so after watching a few videos I checked out parts. I bought the blower fan and resistor from Amazon for less than the cost of the blower from O'reillys or Autozone. Install was step by step on YouTube and pretty easy. Fan works great so far, (I did the install 2 weeks ago) and no issues. Even if its a refurbished/rebuilt its great because my vehicle has 150K miles so if I get 5+ years out of it I'm good with that. I would recommend to anyone.8/10/2021Fan stopped working. Not happy about it.