Your cart is empty.
Your cart is empty. Features:
The item is a professional and practical heatsink, which is mainly made of durable aluminum alloy and suitable for 1/10 Car 540 550 3650 Size Motor.
Comes with a 5V cooling fan to well protect your motor. Besides, the cooling fan can power up from the receiver spare port,very easy to use.
Color:Blue
Material: Durable aluminum alloy and hard plastic.
Cooling fan size: about 30*30*10mm.
Suitable for 1/10 Car 540 550 3650 Size Motor.
Come with a 5V cooling fan to protect your motor.
The cooling fan can power up from the receiver, very easy to use.
Package Includes: (as picture shows)
1 x Alloy Heatsink with 5V Cooling Fan for 540 550 3650 Size Motor
Note:There are only 2 screws to fix the cooling fans,that is not missing screws.It can not install 4 screws due to design size of fans.Contact me if there is any problem with.
Wiley O.
Reviewed in the United States on September 22, 2024
Not to noise, fits good and easy to install, good value, functions good with high speed fan, and built very good.
Budget builder
Reviewed in the United States on June 9, 2024
Arrived quickly and as described. The fit was a little loose and magnets in the motor wouldn't allow it to spin. I gave it a little squeeze and flipped the fan over to get fan motor a little farther from motor magnets. Works and fits perfectly now. The fan is very quiet and does good job. Will buy more for my crawler and street car.
Brett Hataway
Reviewed in the United States on March 12, 2024
Got this to use on my HW Fusion Pro and it really helped out. In Alabama the summers get hot as blazes, so I threw this on along with it geared down and it really helped make it cool. I didn’t use the fan so the heat sink helped a lot on its own. But since it’s getting hotter and I have it geared back to stock on my TRX4 Sport, I’m probably gonna put the fan on just to help it more.
RG22
Reviewed in the United States on October 1, 2024
I added a switch " Hobbypark RC On Off Switch JR Futaba Style 2 Way Power for RC Cars " to turn on or off when needed. Also to add length to cord for rear engine motors on Stampede and Rustler.Seems to work great so far, very quiet.It could use some sort of guard on top of the motor, the fan blades are wide open.Mine has 4 black screws as pictured. They must have updated since I saw lots of reviews showing only 2 screws.Update> Tried one on Traxxas Stampede brushed 4x4 and the fan will not turn because of the motor magnets. I added bushing with longer screws on fan and now it seems to work ok. Will update further...
Bisham ramdial
Reviewed in the United States on July 3, 2021
These are perfect, do not worry about the reviews it does not blow very strong because it pulls very low wattage and when you drive the motor sucks in the cold air from the Dan causing it to cool down it works very good like I said. Trust me
Rick
Reviewed in the United States on May 30, 2021
Super easy install. Fit my 3650 can. One of the only that fit with the plug sticking up where it is. Only 2 screws line up with fan not a big deal.. 5 min drill and tap fix. Not the most powerful fan but DEF keeps temps down.
Customer
Reviewed in Canada on May 28, 2021
Nice Fan MountFan not so niceNot strong
Mitchell Nottage
Reviewed in Canada on March 6, 2021
Only comes with two sqrews on the fan and it breaks super easyVERY BAD
daniel
Reviewed in Canada on January 23, 2021
merci bon
NJSC Coquis
Reviewed in the United States on May 14, 2020
Meh. The heat sink is kinda flimsy. As others have said, the fan is a joke. It barely pushes any air. The motor included was not even the correct size - only two sxrews can,be used to attach it. I had a same size 5v fan that draws 0.2A and it moves a ton of air - I ended up putting that fan on this heatsink. It does fit a 540 size motor a bit loose, but it is easy to reduce it's size to better fit the can. Even still, tje heat sink easily turns on the motor can. I doubt it will stay in place.I will not buy again
Sean
Reviewed in Canada on October 9, 2020
Two screws on the fan dont line up, seems a little “cheaper” built than others, but for the price ill try it out. Fits on my Castle 1410 series fine, little bit of play nothing bad. Would not use this to do large jumps or heavy bashing as it would fail. Cord length was long enough, nice surprise.
Joe Prime
Reviewed in the United States on March 22, 2019
I just received 2 of these units. At the moment not happy as they have the red JST battery connector and not the black connectors that fit the receiver. I contacted the seller to let them know and will see how they respond. I would have given 5 stars as I have several of these fans in several trucks and they work nicely...but deducted two stars only for not getting what was described/pictured.I took a picture to show the red JST connectors they came with. These will only connect directly to a lipo.UPDATE: Seller was very responsive and concerned with my satisfaction. We did discover these red JST connectors fit perfectly on a Fly Sky receiver, but do not fit conventional Futaba J connector receivers, which I have. The seller has provided a solution by sending me some adapters with a switch. The picture should be updated soon to reflect the new connector they come with. The seller is a full 5 star seller! :-)
Kyle Davidson
Reviewed in Canada on November 7, 2019
Works good
Recommended Products
