Your cart is empty.
Your cart is empty.This The Art Of Tone (TAOT) Les Paul wiring kit is truly an upgrade, containing only name brand parts including our own custom TAOT CTS 525K Pots and .022uf 400v orange drops caps. What's included: 4 of our CTS 450S series 525K Audio Pots (10% tolerance), long/split, knurled shaft 8 nuts 4 Lock washers 4 Dress washers 2 Orange Drop (716P) .022uf/400v Capacitors (Cornell-Debulier) 1 Switchcraft long straight toggle switch 1 Cream colored switch tip 1 Deep Nut for Switchcraft switch 1 Switchcraft #J11 1/4 inch Mono Jack 5 feet vintage-style braided shielded single conductor wire 12 inches of vintage-style 7-strand, pre-tinned, 22 awg black cloth push back wire 12 inches 20 awg buss wire Wiring Diagram. Pot Specifications: 525K Ohms - 10% tolerance Audio Taper Bakelite base plate Solid brass c-clip reinforced shaft Solid brass bushing 3/8-32 US thread 3/4 inch bushing height 3/8 inch diameter bushing 1/4 inch diameter shaft Split, fine 24-tooth knurled head Part # 450S525K TAOT A 3/8 inch diameter mounting hole is needed. Please read the following before you order: As a general rule post-1977 production Les Paul's (with a control plate), excluding historic reissue Les Paul's, use long shaft pots. If you are uncertain whether your guitar uses short (3/8") or long (3/4") shaft pots, please double check before you order. All parts in this kit use imperial (not metric) sizing. If you own an imported guitar (e.g. Japan, China, Mexico, etc.), the pots, switch, and jack in this kit will not fit your guitar without enlarging the openings. The switchcraft toggle switch comes standard with a flat nut, depending on the thickness of the body of the guitar (this includes most Les Pauls), you may need to use the "vintage-style" deep nut that is also included in this kit. Returns are only accepted on this item if parts are unused.
Gloria O.
Reviewed in the United States on March 15, 2025
Excelente, justo lo que necesitaba.
Tim M.
Reviewed in the United States on July 22, 2021
The instructions were clear and the components are of good quality.
Brant Luebbe
Reviewed in the United States on December 30, 2020
Easy to install. Sounds much better than the stock wiring in the guitar.
Julio D. Bravo
Reviewed in the United States on January 21, 2020
This is a do it yourself harness so you have to know how to solder. The wiring diagram is good, but you need to look at several wiring diagrams to figure it out. My pickups had 4 wires so I had to follow another wiring diagram. But if you don't have 4 wire pickups you should be ok with the supplied one. You get everything you need in the kit. All the parts are really good quality. So if you want to upgrade and have the skill this kit is half the price or less than the already wired harnesses.
Door Maker
Reviewed in the United States on August 5, 2019
1 - includes Deep nut for 3 way toggle switch, that alone is worth 10 bucks2 - Pots have 2 nuts, makes them adjustable another 10 bucks3 - some grounding wire, cloth and bare. perfect.Now if they could find some smaller capacitors, lol. Great purchase overall!
walkerdj
Reviewed in the United States on December 10, 2019
Everything needed to wire up a Les Paul. Be aware if you are using this on a Chinese Epiphone. You will need to enlarge pot holes and switch hole. The switch barely fits inside the Epi body. High quality parts.
dave
Reviewed in the United States on November 30, 2019
I needed a harness for my les Paul (replacing the pcb assembly that makes it very hard to swap pickups etc). This kit was great, nicely packed, recurved quickly, all quality components, (CT’s, switchcraft, Vishnu) The deep toggle nut as mentioned by another reviewer was a big plus. The Art of Tone does a great job and sells good stuff for a reasonable price.
Robert Sortillon
Reviewed in the United States on October 1, 2019
Put this harness together and installed it in non-Gibson guitar , with the right pick-ups it sounds just like a Gibson !!!!
Recommended Products
$209.00
$ 99 .00 $99.00