Your cart is empty.
Your cart is empty.Product Description
Package includes:20 x Horizontal Side Mount Poultry Nipple
Installation:
Drill a hole a few inches up from the bottom of the container. Screw the threaded chicken nipple directly into the hole. The chicken nipple will come to you already assembled!
Notes:
1.Using an 11/32 inch drill bit, drill 1 hole for each nipple placement. Holes should be at least 2 inch from bottom of container to avoid being clogged with sediment.
2. If using a sealed container, drill a few vent holes near the top of the container to prevent a vacuum being formed.
3.Nipple Drinkers require a low-pressure water source. If connecting to household water lines, a pressure regulator must be used.
4. We suggest one nipple per every 4 chickens / poultry.
Lisa
Reviewed in the United States on June 18, 2024
We tried a new way for our chickens and they love them.
Joe Mc
Reviewed in the United States on May 8, 2024
Bought these a while back and I’m just now getting around to building a PVC waterer for a chicken coop. Drilled my holes as the listing says with an 11/32” drill bit. First two I have tried so far come right out after I screw them in. See picture, the threads are so cheap they just collapse as I hand turned them. Tried second one same thing. Not going to keep trying all of them. Waste of time and money. So I can’t even begin to say if they leak or not.
Jeremy Milner
Reviewed in the United States on December 16, 2024
These work great.
Bill Cross
Reviewed in the United States on December 12, 2024
These didn’t work
Corbett B. Coburn III
Reviewed in the United States on August 29, 2023
I was watering my chickens every day because they wasted so much water. I got these. And once I figured out what size drill bit to use they were easy to install. I was worried the chickens wouldn't be able to figure them out, but there was no problem They pecked the lever out of curiosity and had enough sense to drink the water. Now I only have to water twice a week. These are worth buying.
Marvin Spittle
Reviewed in the United States on August 2, 2023
I have used these nipples several times and each one has worked great. I did have 1 piece in the last bag I bought that was the red plastic with no stainless steel internal. I would like to add that I have bought named brand nipples in my local feed store and every one leaked through the internal valve. These are all I order now.
browneyes
Reviewed in the United States on April 25, 2023
Used a 5/16 drill bit to make a hole for our chickie waterer. This didn’t come with any sort of instructions. We did have to use some flex seal to fill any leaks with our first one. But then I saw in a review to use a 5/16 size drill bit and that helped tremendously! We did have a few faulty pieces that leak, but most work great.
Lo
Reviewed in the United States on June 30, 2022
No waste. Water is clean. Chickens started using it quickly. Easily installed. Had to use tape due to some leaking.
Recommended Products
$38.99
$ 20 .99 $20.99