Your cart is empty.
Your cart is empty.Product Description
TOOLCOOL bearing roller feather board fits easily into the T-slot and locks securely, firmly pressing the workpiece against the fence for precise and smooth cuts. Compatible for table saw and router table with 3/4 x 3/8 inch or 3/8 x 1/4 inch T-slot.
One Way Bearings To Prevent Kick-back
Rolling freely in the feed direction but locking in the opposite direction, prevent kickback, which greatly improves safety.
Flexible rubber wheels without scraping soft wood.
Long Enough & Large Adjustable Range
0.9 to 7.4 Inch adjustable range provides plenty of leeway to accommodate wood stock of various thicknesses.
Adjustable Tension
The pressure of the wheels can be adjusted as required by turning the brass knob; Set to maximum pressure, the wheel loses tension, the featherboard turns into a table saw thin rip jig.
Dr. Jake
Reviewed in the United States on March 19, 2025
In general this is a very nice tool. One problem: brass nuts that adjust feed roller pressure spin themselves off with machinery vibration. I put blue locktite on mine, which kind of defeats the adjustable feature, but it’s better than having nuts spinning off into cutter head! Manufacturer should consider an alternative design for these nuts… perhaps a nyloc feature. Other than this flaw, the product is excellent. Recommended with reservations.
Robert L Sutton Jr
Reviewed in the United States on February 20, 2025
Great product and really impressed with the delivery time
Bob
Reviewed in the United States on February 1, 2025
Fits the Dewalt well. Provides very good control holding the infeed against the fence. Works great for small strips. 1/8” is very doable and repeatable. The anti-kickback works ok, and the control wheels only rotate counter-clockwise but any real force from a kickback can overcome the friction from the rubber coating on the wheels. The fine tuning feature allows you to dial in your cut. I’m torn between 4 and 5 stars, but gave it a 4 because the anti-kickback feature is not fully functional. Use a riving knife and you should have no issues. I really like the tool, and the cost is extremely reasonable. It works well with the Bow extendable fence.
Margaret Greydanus
Reviewed in the United States on January 8, 2025
These work great. You need these.Precision instrument for better work and safety.
Eric C. Schneider
Reviewed in the United States on January 29, 2025
Needed a longer range for a jet bandsaw and this worked perfectly! Had to reverse the wheels but that was easy!
BC
Reviewed in the United States on January 29, 2025
Have used a few times, and this was delivered and works exactly as advertised and I've found it to be useful for my purposes. I will post here if I have an issues in the future.
speedgeezer
Reviewed in the United States on November 3, 2024
I began the return process because the one-way bearings were a real PITA when trying to set up on the table for ripping. You put the stock in with the blade fully retracted, set the featherboard, and then.... Can't pull the stock back out because of the one-way bearings. Did not want to NOT use the Unisaw's splitter/anti-kickback unit. Can't go backward, can't go forward. So, no good for the table. How about on the fence? Nope: now the one-way bearings are going the wrong way. Started the refund, printed the label, etc. Then took a second look. If you take off that plate with the five screws in it, you can remove and reverse the units that have the bearings/wheels attached. Once you see it, it's obvi. Easy-peasy=luv.
Charles E. Bulfinch
Reviewed in the United States on October 27, 2024
Excellent Value,This is a great tool.Easy to use & adjustable.This tool will help keep your work piece secure and most of all help keep you safe.
Recommended Products