Your cart is empty.
Your cart is empty. I am a professional guitar manufacturer and can help you customize other specifications of electric guitar necks, you can contact me by email.
These guitar necks are unfinished and you may need extra work.
Specification:
Orientation: Right hand
Scale Length: 25.5 inch / 648 mm
Number of Frets: 22
Width at Nut: 1.65 inch / 42 mm
Width at 12th Fret: 2.07 inch / 52.5 mm
Width at Heel: 2.22 inch / 56.50 mm (±0.5 mm Deviation)
Depth at 1st Fret: 0.87 inch / 22mm
Depth at 12th Fret: 0.87 inch / 22 mm
Depth at Heel: 0.87 inch / 1.08 inch with Fingerboard (22.00mm / 27.50mm(±0.5mm Deviation)
Tuner Hole Size: 0.39 inch / 10 mm
Truss Rod Type: Double Style ,for 4 mm Allen Wrench
Radius: 14 inch /355 mm
Material: Canadian Maple
Fret Wire: Cupronickel
Fret Wire Type: 2.7 mm Medium Jumbo
Dot Size: 0.24 inch / 6 mm
Side Dot: 2mm PVC
Package Include:
1 x Guitar Neck
Clark M. Saunders
Reviewed in the United States on January 28, 2025
Ordered on December 21, received on January 28. The neck is good.
John
Reviewed in the United States on January 27, 2025
Better build quality than I expected. All frets are set properly, smooth playing, and the scale is dead on.
Nordika
Reviewed in the United States on January 24, 2025
Piss poor customer service and tracking issues..third party bs never again and product is more like firewood than a guitar neck
Linda
Reviewed in the United States on December 29, 2024
Frets are blunt, wood was damaged. Smells like glue and the nut is PLASTIC, not bone.
Power Pop!
Reviewed in the United States on November 14, 2024
The make and frets and finish are decent. Likable quality. Reasonable for the price. The shipping needs vast improvement. Went way beyond the shipping estimate…
Sabrina
Reviewed in the United States on October 3, 2024
The pros:Quality build and constructiongreat fret workfits standard strat neck pocketThe consThe finish color is more of a #2 pencil than aged nitrothe fretboard radius is 12", standard strat is 9.5the nut was mehthe edges are not rolledAll in all it's a great neck if you are willing to do a little work to take it to the next level
Tom deChico
Reviewed in the United States on January 25, 2024
Neck fit my Stratocaster neck pocket perfectly. Tuner holes were also a perfect fit for a set of Fender locking tuners, though I did need to drill the 2 small pin hole guides per tuner, but knew that in advance. The frets were fairly level and smooth needing only slight smoothing with steel wool. The wood was unfinished which is what I wanted as I like a bare feel, and like to finish necks only with a few thin coats of Tru-Wax. Not all Chinese made, after market necks are the same….this was one of the good ones!
Seymour
Reviewed in the United States on September 10, 2023
Overall a very nice neck with a beautiful grain pattern. The frets will only need a minor rounding on some of the ends, but otherwise they appear well-machined. Sometimes these off-brand necks need leveling and sometimes they play right off the bat, and this one seems like the latter. The heel comes in about 1.5mm narrower than listed, but I’m in luck as the pocket on the partscaster is routed on the narrow so it’ll need a 1mm shim along the side.These necks seem to have build imperfections here or there, but are pretty nice after a little work & setup. Can’t wait to string up & play this one!
Recommended Products
$399.99
$ 99 .00 $99.00