Shopping Cart

Your cart is empty.

Your cart is empty.

U.S. Solid 1/2' Solenoid Valve - Stainless Steel 110V AC Solenoid Valve, Normally Open, Viton Seal

Free shipping on orders over $29.99

$49.95

$ 24 .99 $24.99

In Stock

1.Size:1 Inch


About this item

  • Industrial-Grade Material: Made from industrial-grade stainless steel, this valve provides superior corrosion resistance, ease of welding, and is ideal for high-temperature projects. It is compatible with diesel fuel, natural gas, air, and even suitable for drinking water or other water-based projects.
  • Swift Response: Engineered to respond quickly, this valve can open or close in less than a second when triggered, ensuring immediate flow control when turned on or off. With proper maintenance and operating conditions, our engineers estimate its life cycle to exceed a million cycles.
  • Normally Open: In its default state, the solenoid's magnetic field moves the plunger to close the orifice, blocking any fluid or gas flow. This changes when the solenoid is energized.
  • Viton Gasket: Our valve includes a Viton gasket, a modern material known for its chemical inertness. It's commonly used with gasoline, kerosene, and other organic solvents. Beware of solenoid valves with NBR gaskets advertised for gasoline use - these can corrode and potentially lead to serious leaks and accidents.
  • Versatile Applications: The direct-acting solenoid valve is ideal for a variety of industries, including water projects, chemical processing, power generation, and healthcare. Its quick, precise fluid control is perfect for uses ranging from brewing systems to automatic irrigation.



Product Description

U.S. Solid 1/2" 110V AC Normally Open Solenoid Valve, VITON gasket

1

The U.S. Solid motorized solenoid valve features a stainless steel body for general outdoor and indoor use. It is favored by customers for DIY projects, medium temperature and chemical applications, as well as flow control for irrigation, reverse osmosis and motorcycle systems.

Direction of the Flow

Most U.S. Solid Valves are UNIDIRECTIONAL

Make a note of the arrow on your valve. Most U.S. Solid valves are unidirectional. This means they are intended to flow in one direction only, in the direction of the arrow. If connected in opposite directions, the valve will not actuate properly (will not close for Normally Closed valves). Additionally, be sure the medium passing through is filtered. If not, particles will cling to the gasket over time, which can cause it to not seal properly.

1

Specifications

Model USS2-00111
Size 1/2"
Flow Aperture 16 mm
Body Material Stainless Steel
Gasket / Diaphragm / Seal VITON
Rated Voltage AC 110V
Current 0.22 A
Power 24 VA
Operation Type Semi-direct
Operation Mode Normally Open
Operational Pressure Range For water and air: 0 to 128 PSI. For oil: 0 to 99 PSI
Flow Capacity 4.8 gallons per minute (GPM) of water at 60℉ with a pressure drop of 1 PSI
Flow Value 4.8 Cv
Operational Temperature 14 ℉ to 248 ℉
Applications diesel fuel, kerosine, alcohol etc.
Applicable Liquid Viscosity < 20 cst
12

THREADING

U.S. Solid Valves follow National Standards for pipe thread. We suggest the use of Teflon tape to ensure the seal of the NPT threading. The tapered male and female thread form angled surfaces that with increased torque squeeze the Teflon tape resulting in a tight seal.

1

OVERHEATING

These valves should be energized for less than 8 hours. While most do not have more than 18W of power, the coils are in a contained area and can burn out if energized for too long. We suggest a computer fan to keep the coil cool if necessary to energize continuously for extended periods.

1

POLARITY

  • For valves with 2 wires, the valve will actuate regardless of which terminal each wire is connected to (+ or -). Some units include a ground wire. Open up the connector and look for the ground symbol (as shown in the corner).
  • For valves with a ground wire, please be sure to ground the valve.
123

GASOLINE and PRESSURE WARNING

  • NBR gaskets should not be used with gasoline, kerosene, or other petroleum products. If your valve requires contact with these substances, opt for one with a VITON gasket.
  • All solenoid valves need some pressure to actuate. This is especially true of pilot or indirectly operated valves.
1

jimmy
Reviewed in the United States on January 3, 2025
Funcional al 100% , recomendados