Your cart is empty.
Your cart is empty. Specification:
Features:
1.Auto Fill Valve is for both permanent and temporary installations.
2.Non-, tasteless, and can be used for drinking water.
3.3/8\" BSP valve with 1/4\" fitting. .
4.This is the smallest valve in the world.
5.It could be easily used in aquarium and mini water supply equipments which has limited space for valves.
6.Flexible arm can adjust the water level without the relocation of mount position.
7.Pulling out the linchpin, reversing the arm position and pushing in again can convert the side-mount to the top-mount and .
Specifications:
Size : See the picture in detail
Valve Material : POM
Material : POM
Pressure : 0.6MPa
Water Temp. : 176F (80C)
Rate : 5.0L/m
1/4 inches inlet
Package Includes:
1 pcs 3/8\" Mini Valve
How to Use:
Adjustment function method: the screw to adjust the level of the .
Doc
Reviewed in the United States on April 29, 2023
Installed for coffee pot. Water over fills repeatedly.
jerry b.
Reviewed in the United States on July 15, 2021
did what i wanted it to do
Jerome N.
Reviewed in the United States on July 15, 2019
I use these for my mom's 5 gallon water container and water dispenser connected to the RO + alkaline system I installed in her place, works like it should, no leaks so far and does stop the water feed when the water reach the level I set it up to.
Dennis Hubert
Reviewed in the United States on May 5, 2019
This float valve worked perfectly for the auto fill I made for my Keurig knock off
GuyUsesMac
Reviewed in the United States on April 6, 2019
I purchased this valve for a automatic water feed to a coffee maker, which worked great for the first week or so, then one day came home to find water all over my floors and in my cabinets. The water valve failed and would not shut off. After cleaning up the entire mess I pulled the valve out to check to make sure something wasn't stuck in it, and tested it once again to complete failure. It would slow down the water flow, but would not completely shut off.
matthewg
Reviewed in the United States on May 6, 2018
its small good for water form small animals or pond
Inchman
Reviewed in the United States on October 20, 2018
I bought this float valve so I could modify my Keurig coffee maker to keep the water tank full. I connected it to my reverse osmosis water supply, and now I don't have to re-fill the water tank after every few cups of coffee. It's been keeping the tank full now for about a month with no problems.I recommend it to anyone contemplating doing this mod to your Keurig.
Customer
Reviewed in the United States on April 16, 2018
I installed the valve in the water tank of a super-automatic espresso machine, and it did not fully shut off. I tested it, prior to installing it, and it seemed to take more pressure to stop the water flow than the float could possibly achieve, but I decided to give it a try. With the water pressure regulated and set very low, it still failed to shut off the water flow even after the water level had risen to the point that the float was completely submerged. I tried it the next day with full water pressure and it's working well, so far. I'm still apprehensive, after the initial overflow and cleanup. It will work well for parties, so I can turn on the water and not worry about refilling the tank, but I will not leave it on when a I cannot be around to monitor it.
Recommended Products
