Quality made at a reasonable price. Easy to install and looks great.

The media could not be loaded.

Works as it should. Very easy to install. Instructions for installation were easy to follow. Great water flow. Good features (spray, stream, hold buttons). Finish as good as the Moen this replaced at a 1/10 the cost. Would highly recommend.

Easy to install and looks great. we’ve had this product a little over a year. We did have on issue with the sprayer head not working correctly but the company sent out a replacement head as soon as we informed them. I can’t believe how great the customer service is. Thanks for making an affordable and quality product.

Very easy to install, superior design. A breeze to operate and quite an improvement on our old Moen. Packaging was awesome, delivery smart and quick.

Kiki in customer support helped me with a warranty issue!She was immediately responsive! When she did not hear back from me in a timely fashion, she touched base with me again. Then she resolved the issue with great satisfaction to me!This is a very nice, sleek faucet and easy to install!

Love this faucet for the price- easy to install, looks slick, functions well and smoothly. However, the head piece broke and started leaking everywhere after using too many times with searing hot water (We have our water heater set to high)

I usually buy name brand on high use faucets, but our kitchen sink Moen unit's insides literally rusted and stained the stainless steel sink (luckily, under the hole cover plate) - so I don't see the sense in paying $150-$200 for Moen or Koehler.For $45, this Arofa high arc faucet was a seamless replacement, and - in black - it looks really nice against the stainless steel sink.I very much like that the water supply lines are standard stainless steel braided, 3/8" fittings, so I didn't have to get braided lines at the box store, and there are no add'l joints to leak between the supply and the faucet (this is probably standard today, but the Moen it replaced required separate supply lines). One oddity, not a problem, but the 3/8" fittings tighten with a 17mm wrench, most 3/8" fittings tighten with a 16mm.I also much prefer the drop-down sprayer style to the Pull-out-of-post it replaced. The pull OUT style angles *DOWN* into the body of the faucet post, allowing water overspray to trickle into the post. The Moen was replaced because it would barely rotate anymore - it's inner works were rusted completely away, nothing left but a handful of red grit. The pull DOWN sprayer style pulls out of the end of the arc, any overspray would have to travel *UP* and over the arc to get into the faucet body. Much better design.I like that the sprayer hose is covered in a braided stainless steel covered with some kevlar-ish stuff. It slides easily. The moen's uncovered braided steel abraded and unravelled.Installation was trivially easy once the old faucet and it's bits were out. Feed the lines and the threaded section through the 3-hole cover plate; from below slip the large ABS/brass threaded ring over the lines, and hand tighten onto the faucet threads. I'd prefer to wrench tight, but the large ring is clearly designed to prevent over tightening. Attach the braided, color-coded supply lines to the existing 3/8" supply fittings. Clip the sprayer weight to the marked position on the sprayer cable. Turn on the water supply, and you're done.I like the look of the 3-hole cover plate, which has a thick waterproof pad, but I don't like that it is held only by the faucet body & hand-tightened ring. The cover plate it replaced had threaded posts sticking thru the unused holes, which tightened securely to the underside of the sink. Without these, it's too easy to move the cover plate. In the end, I applied plumbing cement to the underside of the plate's soft pad and tightened that securing ring as hand tight as I could get it :-) It can move, still, but it's solid.ONE NOTE... if you existing water supply pipes don't have 3/8" compression fittings... as many older houses don't... *and* you have the option of replacing the supply valve... I'd really suggest replacing the existing multi-turn valve with a 1/4 turn 3/8" comp outlet fitting, directly to the supply pipe (in our case, a 1/2" copper pipe, so a 1/2" compression inlet fitting). The multi-turn valves are horrible sources of leakage. The EASY way is fine - a 3/8" adapter to whatever your supply requires, but is an add'l source for leakage. If your wall pipe is 1/2" copper or 3/4" MIP (threaded pipe), replacing the valve is not beyond most homeownersSO... for a quarter of the price of the faucet it replaced, I'm really happy with this faucet. It looks good, is not leaking, and was easy to install.Time will tell whether it holds up, but it looks and feels solid. All the fittings and supply lines are good quality, all the important parts are 304 steel, all the moving parts move easily, but feel solid.We paid full AMZN price for this item - no compensation for review.

Leider passen die vormontierten Schläuche nicht auf die Eckventile. Kam aus Amerika. Schade, sah super aus. Ist wohl nicht für den deutschen Markt produziert. Trotzdem wird das hier verkauft. Vielleicht leben die ja von den Retouren.

Die Überwurfmutter passt nicht auf mein 3/8 Zoll Eckventil. Für 1/4 Zoll ist das Gewinde allerdings zu groß. Entweder hat der Hersteller ein völlig untypisches 5/16 Gewinde (oder irgendwas dazwischen) reingefräst oder die Fräse wurde nicht richtig eingestellt und/oder das Gewinde für 3/8 nicht richtig fertig geschnitten.So oder so ist das so nicht ohne weiteres montierbar. Die Mitarbeiter in einem namhaften Fachgeschäft waren auch relativ ratlos und konnten mir kein passendes Reduzierstück verkaufen. Somit geht die Armatur, die an sich mit einer ansprechende Anmutung daherkommt, leider zurück.Nachtrag:Ich verbessere die Rezension von 1 Stern auf 3 Sterne, weil mir der Hersteller des Artikels versichert hat, dass er sich die Kritik zu Herzen nimmt und die Armatur künftig mit einem kompatiblen Anschluss ausliefern wird. Die Kommunikation war zudem überaus freundlich und zuvorkommend.

Auch mit viel Mühe und Suche haben wir keinen Adapter für die Anschlüsse an unsere europäische Norm gefunden. Offensichtlich sind amerikanische Zoll nicht mit deuten Zoll vergleichbar oder kompatibel. Schade, denn die Armatur ist sonst sehr schön

Wasserhahn wird mit 1/4 Zoll Anschlüssen geliefert! In der Beschreibung bei Amazon wird dieser mit 3/8 ausgewiesen. Leider habe ich den Hahn erst mühevoll montiert und mich dann umso mehr darüber ärgern dürfen dass dieser sich nicht anschließen lässt. Auch Marken Bauhäuser haben keinerlei Adapter. Auf den Bild zu sehen links der kleinere Anschluss rechts der deutsche Standardanschluss! Ich habe mich daher entschieden den Hahn zurück zuschicken.Ansonsten macht der Hahn einen hochwertigen Eindruck, obwohl an einer Stelle die Legierung angekratzt war. Der Hahn ist sehr leicht, mein früherer und jetzt neuer Hahn von HansGrohe ist dreimal so schwer und steht deutlich standfester. Der Hahn kommt aus LasVegas daher dauerte der Versand 2 Wochen.

سهل التركب وعملي وسعره مناسب وشكله في مغسلة المطبخ مناسب جدا