Your cart is empty.
Your cart is empty.Q: Why one piece sleeve style fork mount is better than end cup style mount? A1: This fork mount has minimal number of parts and each sleeve is not that tiny, which means you have less chance to lost them. A2: This bike fork mount adapter can mounting with 4 screws on both sides, it is more secure than thoes ones which screws only at one side. A3: Unibody axle sleeves always at same horizontal line, if 2 end cups insert at both side, it might not at the same axle line. A4: The self-locking structure make it easy to replace the sleeve.
ABGtiagoRD
Reviewed in the United States on February 7, 2025
I was influenced to add my two cents about this Fork Mount given several of the existing wonderful reviews, especially the very informative and thorough review from Patrick. I second all of the observations about how heavy duty the mounting base is and all components are well built with very good functional fit.The locking mechanism is indeed tricky to close or open. The seemingly unintended fact that the latch easily opens when any of the adapters are rotated within the base, becomes an unintended hinderance for me as I tighten several bikes together. As I move bikes the latch opens and no longer performs its function of keeping the adapter centered on the base. Here is where my only suggestion is directed. In the attached snip there is a red box highlighting an existing flat facet on the base barrel. I wonder if the designer’s intention could be more fully established if the flat feature continues inside the barrel and onto each of the adapter rods (shown as a green highlight box), creating a “D” lock to halt the adapter rotation. Merely a suggestion since the product is so dimensionally good and performs very well as mentioned.
Mark H
Reviewed in the United States on December 9, 2024
I have a similar bike mount to this that cost twice as much. The quality in both are the same. This is a well made, heavy mount that has held my bike securely in place with multiple uses in the past month. Recommended
Time
Reviewed in the United States on December 5, 2024
This bike mount is well built and fits most bike forks. It has four different axle tunes to handle all of the common size axles. The mounting base is heavy duty to keep you bike in place during transport. The mount is well made and it's easy to change out the axle tube to fit other bikes.
Doug Blasco
Reviewed in the United States on December 28, 2024
This is my first fork mount but given that, this is well made and very sturdy.I feel that my bike will be supported well using this.I am designing a Rail Bike and this will be the point that mounts the bike to the rail bike frame.Given what I need it to do, I have a good feeling about this device.Cheers 🍷
AmateurWheels
Reviewed in the United States on December 2, 2024
This didn't work with my fat bike, the adapters included were not wide enough for my fork on my Salsa Beargrease. I bet this will work with a road or CX or MTB though.
Irv
Reviewed in the United States on November 20, 2024
I want to do an experiment to see if I can mount this bracket to a trailer hitch, place my front fork on the bracket, and tow a tandem recumbent down the road (I have seen motorcycle riders do similar). The product is nicely made with the main frame constructed out of extruded aluminum. The magnetic mechanism holding in various axle adapters is a nice feature.No skewer is provided and will need to be purchased separately. A suggested improvement would be to eliminate the two oval cut outs as they add cost and weaken the assembly.
Steven566
Reviewed in the United States on November 20, 2024
I ordered this to replace a fork mount that was similar, but had short adapters that would fall out when trying to set the fork in place. It was super frustrating. These mounts have adapters that go all of the way through and are much more enjoyable to work with. The locking mechanism can be a bit tricky to get open, if you have short nails. I used a flathead screwdriver. I also used a strap that can be seen in the last picture to keep the bike from rocking.
ccrenshaw2012
Reviewed in the United States on October 22, 2024
This mount is rugged, well-machined (& anodized), and the little magnetic clasp that keeps the adapters centered is brilliant! It's pricey, but the quality of all the pieces is apparent from the moment you pull it out of the box. Like other reviewers, I wish the adapters were marked. The QR adapter is obvious, but the Thru-Axle ones aren't immediately apparent if you're trying to determine the right diameter/length combo. Nothing a silver sharpie can't fix.The attachment hardware seems to be of decent quality as well, though I usually use my own screws/bolts on anything I order from Amazon. That said, the fact that T-nuts are included is another nice touch. As I said, this is toward the pricey end of no-name fork mounts, but I'd have no hesitation buying a second one!
Recommended Products
$19.97
$ 9 .99 $9.99
$186.99
$ 85 .99 $85.99